java.text
Class ChoiceFormat

java.lang.Object
  java.text.Format
      java.text.NumberFormat
          java.text.ChoiceFormat

All Implemented Interfaces:

Serializable, Cloneable

public class ChoiceFormat
extends NumberFormat

A ChoiceFormat allows you to attach a format to a range of numbers. It is generally used in a MessageFormat for handling plurals. The choice is specified with an ascending list of doubles, where each item specifies a half-open interval up to the next item:

 X matches j if and only if limit[j] <= X < limit[j+1]
 

If there is no match, then either the first or last index is used, depending on whether the number (X) is too low or too high. If the limit array is not in ascending order, the results of formatting will be incorrect. ChoiceFormat also accepts \u221E as equivalent to infinity(INF).

Note: ChoiceFormat differs from the other Format classes in that you create a ChoiceFormat object with a constructor (not with a getInstance style factory method). The factory methods aren't necessary because ChoiceFormat doesn't require any complex setup for a given locale. In fact, ChoiceFormat doesn't implement any locale specific behavior.

When creating a ChoiceFormat, you must specify an array of formats and an array of limits. The length of these arrays must be the same. For example,

• limits = {1,2,3,4,5,6,7}
  formats = {"Sun","Mon","Tue","Wed","Thur","Fri","Sat"}
• limits = {0, 1, ChoiceFormat.nextDouble(1)}
  formats = {"no files", "one file", "many files"}
  (nextDouble can be used to get the next higher double, to make the half-open interval.)

Here is a simple example that shows formatting and parsing:

 double[] limits = {1,2,3,4,5,6,7};
 String[] dayOfWeekNames = {"Sun","Mon","Tue","Wed","Thur","Fri","Sat"};
 ChoiceFormat form = new ChoiceFormat(limits, dayOfWeekNames);
 ParsePosition status = new ParsePosition(0);
 for (double i = 0.0; i <= 8.0; ++i) {
     status.setIndex(0);
     System.out.println(i + " -> " + form.format(i) + " -> "
                              + form.parse(form.format(i),status));
 }
 

Here is a more complex example, with a pattern format:

 double[] filelimits = {0,1,2};
 String[] filepart = {"are no files","is one file","are {2} files"};
 ChoiceFormat fileform = new ChoiceFormat(filelimits, filepart);
 Format[] testFormats = {fileform, null, NumberFormat.getInstance()};
 MessageFormat pattform = new MessageFormat("There {0} on {1}");
 pattform.setFormats(testFormats);
 Object[] testArgs = {null, "ADisk", null};
 for (int i = 0; i < 4; ++i) {
     testArgs[0] = new Integer(i);
     testArgs[2] = testArgs[0];
     System.out.println(pattform.format(testArgs));
 }
 

Specifying a pattern for ChoiceFormat objects is fairly straightforward. For example:

 ChoiceFormat fmt = new ChoiceFormat(
      "-1#is negative| 0#is zero or fraction | 1#is one |1.0<is 1+ |2#is two |2<is more than 2.");
 System.out.println("Formatter Pattern : " + fmt.toPattern());

 System.out.println("Format with -INF : " + fmt.format(Double.NEGATIVE_INFINITY));
 System.out.println("Format with -1.0 : " + fmt.format(-1.0));
 System.out.println("Format with 0 : " + fmt.format(0));
 System.out.println("Format with 0.9 : " + fmt.format(0.9));
 System.out.println("Format with 1.0 : " + fmt.format(1));
 System.out.println("Format with 1.5 : " + fmt.format(1.5));
 System.out.println("Format with 2 : " + fmt.format(2));
 System.out.println("Format with 2.1 : " + fmt.format(2.1));
 System.out.println("Format with NaN : " + fmt.format(Double.NaN));
 System.out.println("Format with +INF : " + fmt.format(Double.POSITIVE_INFINITY));
 

And the output result would be like the following:

 

   Format with -INF : is negative
   Format with -1.0 : is negative
   Format with 0 : is zero or fraction
   Format with 0.9 : is zero or fraction
   Format with 1.0 : is one
   Format with 1.5 : is 1+
   Format with 2 : is two
   Format with 2.1 : is more than 2.
   Format with NaN : is negative
   Format with +INF : is more than 2.
 

Synchronization

Choice formats are not synchronized. It is recommended to create separate format instances for each thread. If multiple threads access a format concurrently, it must be synchronized externally.

See Also:

DecimalFormat, MessageFormat, Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class java.text.NumberFormat

NumberFormat.Field

Field Summary

Fields inherited from class java.text.NumberFormat

FRACTION_FIELD, INTEGER_FIELD

Constructor Summary

ChoiceFormat(double[] limits, String[] formats)
Constructs with the limits and the corresponding formats.

ChoiceFormat(String newPattern)
Constructs with limits and corresponding formats based on the pattern.

Method Summary

void	applyPattern(String newPattern) Sets the pattern.
Object	clone() Overrides Cloneable
boolean	equals(Object obj) Equality comparision between two
StringBuffer	format(double number, StringBuffer toAppendTo, FieldPosition status) Returns pattern with formatted double.
StringBuffer	format(long number, StringBuffer toAppendTo, FieldPosition status) Specialization of format.
Object[]	getFormats() Get the formats passed in the constructor.
double[]	getLimits() Get the limits passed in the constructor.
int	hashCode() Generates a hash code for the message format object.
static double	nextDouble(double d) Finds the least double greater than d.
static double	nextDouble(double d, boolean positive) Finds the least double greater than d (if positive == true), or the greatest double less than d (if positive == false).
Number	parse(String text, ParsePosition status) Parses a Number from the input text.
static double	previousDouble(double d) Finds the greatest double less than d.
void	setChoices(double[] limits, String[] formats) Set the choices to be used in formatting.
String	toPattern() Gets the pattern.

Methods inherited from class java.text.NumberFormat

format, format, format, getAvailableLocales, getCurrency, getCurrencyInstance, getCurrencyInstance, getInstance, getInstance, getIntegerInstance, getIntegerInstance, getMaximumFractionDigits, getMaximumIntegerDigits, getMinimumFractionDigits, getMinimumIntegerDigits, getNumberInstance, getNumberInstance, getPercentInstance, getPercentInstance, getRoundingMode, isGroupingUsed, isParseIntegerOnly, parse, parseObject, setCurrency, setGroupingUsed, setMaximumFractionDigits, setMaximumIntegerDigits, setMinimumFractionDigits, setMinimumIntegerDigits, setParseIntegerOnly, setRoundingMode

Methods inherited from class java.text.Format

format, formatToCharacterIterator, parseObject

Methods inherited from class java.lang.Object

finalize, getClass, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

ChoiceFormat

public ChoiceFormat(String newPattern)

Constructs with limits and corresponding formats based on the pattern.

See Also:

applyPattern(java.lang.String)

ChoiceFormat

public ChoiceFormat(double[] limits,
                    String[] formats)

Constructs with the limits and the corresponding formats.

See Also:

setChoices(double[], java.lang.String[])

Method Detail

applyPattern

public void applyPattern(String newPattern)

Sets the pattern.

Parameters:

newPattern - See the class description.

toPattern

public String toPattern()

Gets the pattern.

setChoices

public void setChoices(double[] limits,
                       String[] formats)

Set the choices to be used in formatting.

Parameters:

limits - contains the top value that you want parsed with that format,and should be in ascending sorted order. When formatting X, the choice will be the i, where limit[i] <= X < limit[i+1]. If the limit array is not in ascending order, the results of formatting will be incorrect.

formats - are the formats you want to use for each limit. They can be either Format objects or Strings. When formatting with object Y, if the object is a NumberFormat, then ((NumberFormat) Y).format(X) is called. Otherwise Y.toString() is called.

getLimits

public double[] getLimits()

Get the limits passed in the constructor.

Returns:

the limits.

getFormats

public Object[] getFormats()

Get the formats passed in the constructor.

Returns:

the formats.

format

public StringBuffer format(long number,
                           StringBuffer toAppendTo,
                           FieldPosition status)

Specialization of format. This method really calls format(double, StringBuffer, FieldPosition) thus the range of longs that are supported is only equal to the range that can be stored by double. This will never be a practical limitation.

Specified by:

format in class NumberFormat

See Also:

Format.format(java.lang.Object)

format

public StringBuffer format(double number,
                           StringBuffer toAppendTo,
                           FieldPosition status)

Returns pattern with formatted double.

Specified by:

format in class NumberFormat

Parameters:

number - number to be formatted & substituted.

toAppendTo - where text is appended.

status - ignore no useful status is returned.

See Also:

Format.format(java.lang.Object)

parse

public Number parse(String text,
                    ParsePosition status)

Parses a Number from the input text.

Specified by:

parse in class NumberFormat

Parameters:

text - the source text.

status - an input-output parameter. On input, the status.index field indicates the first character of the source text that should be parsed. On exit, if no error occured, status.index is set to the first unparsed character in the source text. On exit, if an error did occur, status.index is unchanged and status.errorIndex is set to the first index of the character that caused the parse to fail.

Returns:

A Number representing the value of the number parsed.

See Also:

NumberFormat.isParseIntegerOnly(), Format.parseObject(java.lang.String, java.text.ParsePosition)

nextDouble

public static final double nextDouble(double d)

Finds the least double greater than d. If NaN, returns same value.

Used to make half-open intervals.

See Also:

previousDouble(double)

previousDouble

public static final double previousDouble(double d)

Finds the greatest double less than d. If NaN, returns same value.

See Also:

nextDouble(double)

clone

public Object clone()

Overrides Cloneable

Overrides:

clone in class NumberFormat

Returns:

a clone of this instance.

See Also:

Cloneable

hashCode

public int hashCode()

Generates a hash code for the message format object.

Overrides:

hashCode in class NumberFormat

Returns:

a hash code value for this object.

See Also:

Object.equals(java.lang.Object), Hashtable

equals

public boolean equals(Object obj)

Equality comparision between two

Overrides:

equals in class NumberFormat

Parameters:

obj - the reference object with which to compare.

Returns:

true if this object is the same as the obj argument; false otherwise.

See Also:

Object.hashCode(), Hashtable

nextDouble

public static double nextDouble(double d,
                                boolean positive)

Finds the least double greater than d (if positive == true), or the greatest double less than d (if positive == false). If NaN, returns same value. Does not affect floating-point flags, provided these member functions do not: Double.longBitsToDouble(long) Double.doubleToLongBits(double) Double.isNaN(double)