| Previous | Contents | Index |
When the IVP is run automatically during the installation of ACMS, all output from the IVP is logged in SYS$UPDATE:ACMSIVP.LOG. When the IVP is run manually, all output is displayed on the terminal.
If the IVP detects an error, it provides an appropriate error message. This message includes a suggested action, such as stopping the ACMS system and reinvoking the IVP. If the suggested action does not fix the problem, reinstall ACMS.
IVP Can Fail with INVACMPAR Error When MSS_POOLSIZE Is Too Low
When you run the IVP, it resets all the ACMSGEN parameters to their default values. If the value of the SYSGEN parameter MAXPROCESSNT is too large, the default size of MSS_POOLSIZE can be too low to allow ACMS to start. The following error is reported when any ACMS operator command is entered:
-ACMSMSS-E-INVACMPAR, The system MSS parameters are invalid |
To run the IVP, include the following in the ACMSIVP.COM file, which is located in the subdirectory [.ACMS] under SYS$TEST --- you might need to set the value of MSS_POOLSIZE to be larger, depending on the value of MAXPROCESSCNT:
$ MCR ACMSGEN USE DEFAULT SET MSS_POOLSIZE 1024 SET ACC_USERNAME ACMS$IVP . . . |
This section contains a sample manual execution of the ACMS IVP for the ACMS Alpha development kit.
Starting the ACMS V4.4-0 Installation Verification Procedure
at 11:13 on 22-JUN-2001
The IVP is testing a development installation
(Checking privileges)
(Checking for existing ACMS processes)
(Checking for execution of ACMSTART.COM)
(Checking ACMS logicals)
(Checking ACMS system files)
(Checking CDD directory CDD$TOP.ACMS$DIR.ACMS$IVP)
(Defining IVP's tasks and task group)
%ACMSTDU-I-WRITETDB, Writing TDB
-ACMSTDU-I-BYTESWRIT, 3584 bytes (7 blocks)
%ACMSTDU-I-OBJMODCRE, Procedure server 'GROUP1_SERVER1' object module created
in file 'SYS$COMMON:[SYSTEST.ACMS]GROUP1_SERVER1.OBJ;3'
(Defining IVP's application)
%ACMSCDU-I-WRITEADB, Writing ADB
-ACMSCDU-I-BYTESWRIT, 1824 bytes (4 blocks)
(Linking server image)
(Updating IVP's DDF file)
(Updating IVP's UDF file)
(Creating IVP's ACMSPAR file)
(Starting ACMS system)
(Starting ACMS application ACMSIVP)
(Checking ACMS processes)
(Selecting IVP's tasks)
ACMS V4.4-0 Current System State: STARTED Time: 22-JUN-2001 11:15:19.65
Terminal Subsystem State: STARTED
Queued Task Initiator State: STOPPED
System Auditing State: ENABLED
Active ACMS Users
User Name Submitter ID Agent PID Device
SYSTEM 00010014 28A00CBB RTA5:
Active Execution Controllers
Application Name Process Name User Name Exc PID
ACMSIVP ACMS01EXC001000 ACMS$IVP 28A00CD9
(Testing the ACMS Debugger)
(Testing the ACMS Queued Task Initiator)
(Testing the ACMS Queue Manager)
(Stopping the ACMS system)
ACMS V4.4-0 Installation Verification Procedure completed
successfully at 11:15 on 22-JUN-2001
(Cleaning up)
$ LOGOUT
SYSTEM logged out at 22-JUN-2001 11:16:07.07
|
This chapter describes the process of deinstalling ACMS.
The deinstallation of ACMS removes all ACMS files from your system, including customer-written applications in ACMS$DIRECTORY. |
Deinstallation is necessary only if you no longer need ACMS on your system and you want to release the disk space for other use.
Deinstallation is not necessary if you are upgrading to a new version
of ACMS. When you upgrade, obsolete ACMS files are deleted and
superseded files are purged automatically by the installation procedure.
6.1 Starting the Deinstallation Procedure
To invoke the ACMS deinstallation procedure, execute the following command:
$ @SYS$UPDATE:ACMS_DEINSTALL.COM |
The deinstallation procedure asks if you want to continue. The default answer is NO; you must answer YES [Return] to continue.
The deinstallation procedure then does the following:
If files are found that might be related to ACMS, the deinstallation procedure lists them on your terminal. You can review any files listed in this manner and delete them manually, or you can reinvoke the deinstallation procedure to delete them automatically. Execute the following command to delete these files automatically:
$ @SYS$UPDATE:ACMS_DEINSTALL.COM DELETE_SUSPECTED_ACMS_FILES |
The ACMS deinstallation procedure removes all files related to ACMS from the system. However, to complete the deinstallation of ACMS, you might also want to perform some or all of the following cleanup steps:
$ DELETE SYS$UPDATE:ACMS_DEINSTALL.COM;* |
This appendix contains sample installations of the ACMS development kits.
These samples represent typical installations. Many variations are
possible, based on the OpenVMS version and the presence of other
layered products on your system.
A.1 OpenVMS Alpha Development Kit Sample Installation
This section contains a sample installation of the ACMS Version 4.4 for OpenVMS Alpha development kit. The details of your actual installation may be somewhat different.
$ @sys$update:vmsinstal ACMSDEVA_044 dua0:[kits]
OpenVMS AXP Software Product Installation Procedure V7.3
It is 22-JUN-2001 at 09:22.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
_RTA2:
* Do you want to continue anyway [NO]? YES
* Are you satisfied with the backup of your system disk [YES]?
The following products will be processed:
ACMSDEVA_ V4.4
Beginning installation of ACMSDEVA_ V4.4 at 09:22
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.
COPYRIGHT (c) 1999 Compaq Computer Corporation.
All Rights Reserved.
Unpublished rights reserved under the copyright
laws of the United States.
The software contained on this media is proprietary
to and embodies the confidential technology of
Compaq Computer Corporation. Possession, use,
duplication or dissemination of the software and
media is authorized only pursuant to a valid written
license from Compaq Computer Corporation.
RESTRICTED RIGHTS: Use, duplication, or disclosure by
the U.S. Government is subject to restrictions as set
forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013,
or in FAR 52.227-19, as applicable.
The results of this installation are being logged in:
SYS$COMMON:[SYSUPD]ACMS044_INSTALLATION.LOG
Installing ACMS V4.4-0, development kit
There are five optional parts to the ACMS development kit installation:
o ACMS component software
o ACMS LSE update
o ACMS samples
o ACMS Request Interface samples
o ACMS WBEM related files
The full installation includes all these parts.
If ACMS component software is selected, the ACMS WBEM related files
will also be copied.
To install the ACMS samples or the ACMS Request Interface samples, you must
install, or have previously installed, the ACMS component software.
* Do you want the full ACMS installation [NO]? YES
CHECKING INSTALLATION PREREQUISITES
-----------------------------------
The following software products are not available, or are below the minimum
required version:
Product Required Minimum version Current Version
-------------------- -------- --------------- ---------------
LSE No V4.3 V4.2-17
If products marked as nonrequired are to be used with ACMS, they should be
upgraded to at least the minimum version displayed before use.
(required and optional software checked)
(product licenses checked)
The following images are not installed:
Product Image Required Startup Procedure
--------------- ------------------------- -------- --------------------
DECtrace VMI$ROOT:[SYSLIB]EPC$FUNC No EPC$STARTUP.COM
The images marked as required must be installed before this installation can
be successfully completed. These images are usually installed by executing
the product's startup procedure. For more information, refer to product
specific documentation and the VMS INSTALL Utility Manual.
(installed images checked)
(privileges checked)
(disk space checked)
(disk quotas checked)
(system parameters checked)
(process account quotas checked)
ACMS PREVIOUS INSTALLATION
--------------------------
(no previous installation of ACMS found)
ACMS LSE CHECK
--------------
(LSE available and will be updated for ACMS)
ACMS WBEM CHECK
---------------
ACMS Oracle Trace CHECK
-------------------
Oracle Trace is not being updated for ACMS because it is not available, not
started, or Rdb is not started.
The ACMS facility definition will be stored in SYS$SHARE:EPC$FACILITY.TLB.
For more information on inserting this definition into the Oracle Trace
administrative database, refer to the Oracle Trace documentation.
ACMS OLD SAMPLE FILES
---------------------
(no old sample files found)
ACMS SHUTDOWN CHECK
-------------------
ACMSTOP.COM was not found. If ACMS was previously installed on this
system, make sure it is shut down before proceeding with this
installation.
ACMS POSTINSTALLATION PROCEDURE
-------------------------------
(postinstallation procedure will be run automatically after installation)
Please read the chapter After Installing ACMS, in the ACMS Installation
Guide, for manual tasks that you should consider after installing ACMS.
ACMS SYSTEM ROOTS CHECK
-----------------------
(no ACMS-related files found in system-specific roots)
ACMS IVP
--------
* Do you want to execute the Installation Verification Procedure [YES]?
Checking IVP user account ACMS$IVP
The ACMS$IVP account used to execute the IVP is not available.
You must supply a UIC and password for this account so that it can be
created; this must be done before the IVP can be executed.
Please enter the UIC for the ACMS$IVP account, in the form [ggggg,nnnnnn]
* UIC: [11,100]
Please enter a password of at least 8 characters, using only
the following characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789$_
* Password:
* Verification:
SUMMARY OF THIS ACMS INSTALLATION
---------------------------------
The following steps will be taken to complete this installation:
o The ACMS system will be shut down (via SYS$STARTUP.ACMSTOP.COM)
o ACMS component software will be installed
o WBEM environment will be updated for ACMS
o LSE environment will be updated for ACMS
o Oracle Trace facility text library will be updated for ACMS
o CDD-related ACMS files will be installed
o ACMS samples will be installed
o ACMS Request Interface samples will be installed
o The ACMS postinstallation procedure will be executed
o The ACMS IVP will be executed
The rest of the installation will take approximately 7 minutes.
Execution of the IVP will take approximately 2 minutes.
Note that this time is heavily dependent your system load, hardware
and kit media. The time mentioned was measured on a stand-alone DEC 3000
(Alpha) system with a disk-resident kit. Your time may vary.
* Do you want to continue the installation [YES]?
The interactive portion of this installation is complete; no further questions
will be asked until the post installation.
Installation of ACMS started
at 09:30 on 22-JUN-2001
Restoring savesets
%VMSINSTAL-I-RESTORE, Restoring product save set J ...
%VMSINSTAL-I-RESTORE, Restoring product save set K ...
%VMSINSTAL-I-RESTORE, Restoring product save set L ...
%VMSINSTAL-I-RESTORE, Restoring product save set M ...
%VMSINSTAL-I-RESTORE, Restoring product save set N ...
%VMSINSTAL-I-RESTORE, Restoring product save set O ...
%VMSINSTAL-I-RESTORE, Restoring product save set P ...
%VMSINSTAL-I-RESTORE, Restoring product save set R ...
Checking/creating ACMS directories
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
VMI$ROOT:[SYSHLP.EXAMPLES.ACMSMGMT].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
VMI$ROOT:[SYSTEST.ACMS].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
VMI$ROOT:[SYSHLP.EXAMPLES.ACMSSI].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
VMI$ROOT:[SYSHLP.EXAMPLES.ACMS].
%VMSINSTAL-I-SYSDIR, This product creates system disk directory
VMI$ROOT:[SYSHLP.EXAMPLES.ACMS.RI].
Updating LSE
Updating Oracle Trace definition text library
Deleting old CDD$TOP.ACMS$DIR.ACMS$WORKSPACES
Creating CDD$TOP.ACMS$DIR.ACMS$WORKSPACES
Deleting old RI sample CDD nodes...
Restoring RI sample application CDD nodes...
%VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named ACMS$IVP.
%UAF-I-ADDMSG, user record successfully added
%UAF-I-RDBADDMSGU, identifier ACMS$IVP value [000011,000100] added to rights
database
Account ACMS$IVP created
Updating account ACMS$IVP to current parameters
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP.
%UAF-I-MDFYMSG, user record(s) updated
Account ACMS$IVP updated
ACMS$IVP account created/updated -- IVP selected to run
Providing files
Provided DCL command file ACMS.CLD
Provided DCL help file ACMSHELP.HLP
All other files provided - list is in
JDIDIT$DKB200:[SYS0.SYSCOMMON.][SYSEXE]ACMS044_FILES.DAT
Installation of ACMS completed successfully
at 09:34 on 22-JUN-2001
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
COPYRIGHT (c) 1999 Compaq Computer Corporation.
All Rights Reserved.
Unpublished rights reserved under the copyright
laws of the United States.
The software contained on this media is proprietary
to and embodies the confidential technology of
Compaq Computer Corporation. Possession, use,
duplication or dissemination of the software and
media is authorized only pursuant to a valid written
license from Compaq Computer Corporation.
RESTRICTED RIGHTS: Use, duplication, or disclosure by
the U.S. Government is subject to restrictions as set
forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013,
or in FAR 52.227-19, as applicable.
ACMS postinstallation procedure started
at 09:36 on 22-JUN-2001
**************************************************************
* *
* NOTE: Refer to Chapter 4 in the ACMS Installation Guide *
* for other important postinstallation work. *
* *
**************************************************************
Checking/creating logical ACMS$DIRECTORY
----------------------------------------
The procedure checks for the logical ACMS$DIRECTORY, which must be defined
/SYSTEM /SUPERVISOR and must point to an existing disk directory.
ACMS$DIRECTORY is defined as SYS$SYSDEVICE:[ACMS.ADB]
SYS$SYSDEVICE:[ACMS.ADB] does not exist
Do you want to create it [Y]?
Created directory SYS$SYSDEVICE:[ACMS.ADB]
ACMS$DIRECTORY is defined as SYS$SYSDEVICE:[ACMS.ADB]
ACMS$DIRECTORY logical is acceptable
Converting ACMSGEN parameter files
----------------------------------
This procedure searches for all ACMSGEN parameter files located in
SYS$SYSDEVICE:[SYS*.SYSEXE] and SYS$COMMON:[SYSEXE], and converts
them to be compatible with the current version of ACMS. If you are
upgrading from a version of ACMS prior to V4.0, you must perform
this conversion.
Do you want to convert existing ACMSGEN parameter files [Y]?
Converting SYS$COMMON:[SYSEXE]ACMSPAR.ACM
The ACMSGEN parameter files listed above have been converted; if other
parameter files exist on your system, they must be updated as follows:
$ RUN SYS$SYSTEM:ACMSGEN
ACMSGEN> USE file-specification
ACMSGEN> WRITE file-specification
ACMSGEN> EXIT
(press <RETURN> to continue)
Converting ACMS UDF and DDF files
---------------------------------
The procedure searches for the files pointed to by the ACMSUDF and ACMSDDF
logicals, if they exist, and then for AMCSUDF.DAT or ACMSDDF.DAT in
SYS$SYSROOT:[SYS*], and converts them to be compatible with the current
version of ACMS. If you are upgrading from a version of ACMS prior to V3.1,
you must perform this conversion.
Do you want to convert existing ACMS UDF and DDF files [Y]?
No files found to convert
(press <RETURN> to continue)
Checking/creating ACMS UDF and DDF files
----------------------------------------
The procedure checks for ACMSUDF.DAT and ACMSDDF.DAT, first through the
logicals ACMSUDF and ACMSDDF, and then in SYS$COMMON:[SYSEXE], and
creates them if they're not already present from a previous installation.
No /SYSTEM /EXECUTIVE logical ACMSUDF found
SYS$COMMON:[SYSEXE]ACMSUDF.DAT not found
Creating SYS$COMMON:[SYSEXE]ACMSUDF.DAT
No /SYSTEM /EXECUTIVE logical ACMSDDF found
SYS$COMMON:[SYSEXE]ACMSDDF.DAT not found
Creating SYS$COMMON:[SYSEXE]ACMSDDF.DAT
(press <RETURN> to continue)
Checking/creating ACMS_SETUP.COM
--------------------------------
The procedure checks for site-specific startup procedure ACMS_SETUP.COM in
SYS$COMMON:[SYS$STARTUP], and creates a template if the file doesn't
already exist.
Creating SYS$COMMON:[SYS$STARTUP]ACMS_SETUP.COM
ACMS_SETUP.COM will be executed the next time you invoke
SYS$STARTUP:ACMSTART.COM. Please review ACMS_SETUP.COM and adjust it to
reflect the needs of your ACMS environment. It can be used to perform
these site-specific startup steps:
- define the ACMS logical ACMS$DIRECTORY
- install ACMS utilities as shareable images
- define ACMS logicals such as ACMS$AUDIT_LOG, ACMS$SWL_LOG,
ACMS$NOTICE, ACMS$EDIT, ADU$EDIT and SWLUP$EDIT
- start the ACMS system and applications
(press <RETURN> to continue)
Checking/copying ACMS menu files
--------------------------------
The procedure checks for the ACMS command menu and default user menu in
ACMS$DIRECTORY, and copies them from SYS$COMMON:[SYSEXE] if they're not
already in ACMS$DIRECTORY from a previous installation.
Copying new ACMSCMD.MDB to ACMS$DIRECTORY
Copying new ACMS.MDB to ACMS$DIRECTORY
**************************************************************
* *
* NOTE: Refer to Chapter 4 in the ACMS Installation Guide *
* for other important postinstallation work. *
* *
**************************************************************
Checking/creating ACMS$MGMT_SETUP.COM
-------------------------------------
**************************************************************
* *
* NOTE: Refer to the Managing the Remote Manager chapter *
* in the ACMS Remote Systems Management Guide for more *
* information. *
* *
**************************************************************
Do you want to SETUP and CONFIGURE the ACMS Remote System Manager [Y]?
Creating SYS$STARTUP:ACMS$MGMT_SETUP.COM
Do you want to allow Proxy Authorization [Y]?
(ACMS$MGMT_CONFIG) Enter the file specification for the configuration file used
by the ACMS Remote Manager
Equivalence string [ SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM ]:
(ACMS$MGMT_TEMP) Enter the directory where the temp command procedures will be
created
Equivalence string [ SYS$SPECIFIC:[ACMS_RM.TMP] ]:
SYS$SPECIFIC:[ACMS_RM.TMP] does not exist
Do you want to create it [Y]?
Created directory SYS$SPECIFIC:[ACMS_RM.TMP]
(ACMS$MGMT_LOG) Enter the directory for the ACMS Remote Manager's Log file
Equivalence string [ SYS$SPECIFIC:[ACMS_RM.LOG] ]:
SYS$SPECIFIC:[ACMS_RM.LOG] does not exist
Do you want to create it [Y]?
Created directory SYS$SPECIFIC:[ACMS_RM.LOG]
(ACMS$MGMT_CREDS_DIR) Enter the directory for the ACMS Remote Manager
Credential's
Equivalence string [ SYS$SPECIFIC:[ACMS_RM.CREDS] ]:
SYS$SPECIFIC:[ACMS_RM.CREDS] does not exist
Do you want to create it [Y]?
Created directory SYS$SPECIFIC:[ACMS_RM.CREDS]
(ACMS$MGMT_SNAPSHOT) Enter the directory where the snapshot data will be stored
Equivalence string [ SYS$SPECIFIC:[ACMS_RM.SNAPSHOT] ]:
SYS$SPECIFIC:[ACMS_RM.SNAPSHOT] does not exist
Do you want to create it [Y]?
Created directory SYS$SPECIFIC:[ACMS_RM.SNAPSHOT]
(ACMS$MGMT_ERR_LOG) Enter the directory where the Error Log data will be stored
Equivalence string [ SYS$SPECIFIC:[ACMS_RM.ERR_LOG] ]:
SYS$SPECIFIC:[ACMS_RM.ERR_LOG] does not exist
Do you want to create it [Y]?
Created directory SYS$SPECIFIC:[ACMS_RM.ERR_LOG]
SYS$STARTUP:ACMS$MGMT_SETUP.COM will be executed the next time
SYS$STARTUP:ACMSTART.COM is invoked. Please review ACMS$MGMT_SETUP.COM
and adjust it to reflect the needs of your ACMS Remote Systems Management
environment.
Creating/Checking the RM Identifiers and SNMP account
Checking for user account ACMS$SNMP
Identifier for ACMS$MGMT_READ does not exist
%UAF-I-RDBADDMSG, identifier ACMS$MGMT_READ value %X80010087 added to rights database
Identifier for ACMS$MGMT_WRITE does not exist
%UAF-I-RDBADDMSG, identifier ACMS$MGMT_WRITE value %X80010088 added to rights database
Identifier for ACMS$MGMT_OPER does not exist
%UAF-I-RDBADDMSG, identifier ACMS$MGMT_OPER value %X80010089 added to rights database
Identifier for ACMS$MGMT_SYSUPD does not exist
%UAF-I-RDBADDMSG, identifier ACMS$MGMT_SYSUPD value %X80010090 added to rights database
The ACMS$SNMP account used to execute ACMSMGR SNMP commands is not available.
You must supply a UIC and password for this account so that it can be
created; this must be done before the $MGMT can be executed.
Please enter the UIC for the ACMS$SNMP account, in the form [ggggg,nnnnnn]
* UIC: [256,256]
Please enter a password of at least 8 characters, using only
the following characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789$_
* Password:
* Verification:
%VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named ACMS$SNMP.
%UAF-I-ADDMSG, user record successfully added
%UAF-I-RDBADDMSGU, identifier ACMS$SNMP value [000256,000256] added to rights
database
Account ACMS$SNMP created
Updating account ACMS$SNMP to current parameters
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$SNMP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$SNMP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$SNMP.
%UAF-I-MDFYMSG, user record(s) updated
%VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$SNMP.
%UAF-I-MDFYMSG, user record(s) updated
Account ACMS$SNMP updated
Checking config file SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM
Creating a new Remote Mananger config file SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
%ACMSMGMT-S-NORMAL, Operation completed
Entity Entity Coll Collection
Name Type Class State
-----------------------------------------------------------------------------
* * id enabled
* * config enabled
* * runtime disabled
* * pool disabled
* * error disabled
The ACMS Remote Manager has been configured.
The command procedure SYS$STARTUP:ACMS$MGMT_ENV.COM should be invoked
to define the symbols for starting the ACMS Remote Manager and running
the Remote Manager client
Do you want to invoke ACMS$MGMT_SETUP.COM to define the Remote Manager
logicals [Y]?
ACMS Remote Manager Setup Complete
***************************************************************
* *
* If you want to use the WBEM interface for the ACMS Remote *
* Manager, you need to invoke SYS$STARTUP:ACMS$WBEM_SETUP.COM *
* *
***************************************************************
ACMS postinstallation procedure completed successfully
at 09:36 on 22-JUN-2001
%RUN-S-PROC_ID, identification of created process is 0001AB29
COPYRIGHT (c) 1999 Compaq Computer Corporation.
All Rights Reserved.
Unpublished rights reserved under the copyright
laws of the United States.
The software contained on this media is proprietary
to and embodies the confidential technology of
Compaq Computer Corporation. Possession, use,
duplication or dissemination of the software and
media is authorized only pursuant to a valid written
license from Compaq Computer Corporation.
RESTRICTED RIGHTS: Use, duplication, or disclosure by
the U.S. Government is subject to restrictions as set
forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013,
or in FAR 52.227-19, as applicable.
ACMS Installation Verification Procedure started
at 09:37 on 22-JUN-2001
ACMS V4.4-0 Current System State: STARTED Time: 22-JUN-2001 09:38:19.90
Terminal Subsystem State: STARTED
Queued Task Initiator State: STOPPED
System Auditing State: ENABLED
Active ACMS Users
User Name Submitter ID Agent PID Device
SYSTEM 00010014 0001AB26 RTA3:
Active Execution Controllers
Application Name Process Name User Name Exc PID
ACMSIVP ACMS01EXC001000 ACMS$IVP 0001AB2E
ACMS Installation Verification Procedure completed successfully
at 09:38 on 22-JUN-2001
Results of IVP are in SYS$COMMON:[SYSUPD]ACMSIVP.LOG
Installation of ACMSDEVA_ V4.4 completed at 09:38
Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY
Creating installation data file:VMI$ROOT:[SYSUPD]ACMSDEVA_044.VMI_DATA
VMSINSTAL procedure done at 09:38
$ lo
SYSTEM logged out at 22-JUN-2001 09:40:56.34
|
| Previous | Next | Contents | Index |