This section contains a sample installation of the ACMS Version 4.4 for OpenVMS VAX development kit. The details of your actual installation may be somewhat different.

$ @sys$update:vmsinstal OpenVMS VAX Software Product Installation Procedure V7.1 It is 22-JUN-2001 at 09:51. Enter a question mark (?) at any time for help. * Are you satisfied with the backup of your system disk [YES]? * Where will the distribution volumes be mounted: DUA0:[KITS] Enter the products to be processed from the first distribution volume set. * Products: ACMSDEVV_044 * Enter installation options you wish to use (none): The following products will be processed: ACMSDEVV_ V4.4 Beginning installation of ACMSDEVV_ V4.4 at 09:52 %VMSINSTAL-I-RESTORE, Restoring product save set A ... %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. COPYRIGHT (c) 1999 Compaq Computer Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. The software contained on this media is proprietary to and embodies the confidential technology of Compaq Computer Corporation. Possession, use, duplication or dissemination of the software and media is authorized only pursuant to a valid written license from Compaq Computer Corporation. RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, as applicable. The results of this installation are being logged in: SYS$COMMON:[SYSUPD]ACMS044_INSTALLATION.LOG Installing ACMS V4.4-0, development kit There are four optional parts to the ACMS development kit installation: o ACMS component software o ACMS LSE update o ACMS samples o ACMS Request Interface samples The full installation includes all these parts. To install the ACMS samples or the ACMS Request Interface samples, you must install, or have previously installed, the ACMS component software. * Do you want the full ACMS installation [NO]? YES CHECKING INSTALLATION PREREQUISITES ----------------------------------- The following software products are not available, or are below the minimum required version: Product Required Minimum version Current Version -------------------- -------- --------------- --------------- DECtrace No 2.0 (not available) If products marked as nonrequired are to be used with ACMS, they should be upgraded to at least the minimum version displayed before use. (required and optional software checked) (product licenses checked) The following images are not installed: Product Image Required Startup Procedure --------------- ------------------------- -------- -------------------- DECtrace VMI$ROOT:[SYSLIB]EPC$FUNC No EPC$STARTUP.COM The images marked as required must be installed before this installation can be successfully completed. These images are usually installed by executing the product's startup procedure. For more information, refer to product specific documentation and the VMS INSTALL Utility Manual. (installed images checked) (privileges checked) (disk space checked) (disk quotas checked) (system parameters checked) (process account quotas checked) ACMS PREVIOUS INSTALLATION -------------------------- (no previous installation of ACMS found) ACMS LSE CHECK -------------- (LSE available -- LSE will be updated for ACMS) ACMS Oracle Trace CHECK ----------------------- Oracle Trace is not being updated for ACMS because it is not available, not started, or Rdb is not started. The ACMS facility definition will be stored in SYS$SHARE:EPC$FACILITY.TLB. For more information on inserting this definition into the Oracle Trace administrative database, refer to the Oracle Trace documentation. ACMS OLD SAMPLE FILES --------------------- (no old sample files found) ACMS SHUTDOWN CHECK ------------------- ACMSTOP.COM was not found. If ACMS was previously installed on this system, make sure it is shut down before proceeding with this installation. ACMS POSTINSTALLATION PROCEDURE ------------------------------- (postinstallation procedure will be run automatically after installation) Please read the chapter After Installing ACMS, in the ACMS Installation Guide, for manual tasks that you should consider after installing ACMS. ACMS SYSTEM ROOTS CHECK ----------------------- The following ACMS-related files were found in system-specific roots: AMAMA$DKA500:[SYS0.SYSEXE]SYSUAF.DAT The files listed above, found in system-specific roots, may have an adverse effect in the installation of ACMS, execution of the IVP, or subsequent execution of applications. If you encounter problems during or after the installation, Compaq advises you to review the list and delete or rename these files, or move them to cluster-common directories, and then reinstall ACMS. The list of files is also recorded in SYS$COMMON:[SYSUPD]ACMS044_INSTALLATION.LOG. ACMS IVP -------- * Do you want to execute the Installation Verification Procedure [YES]? Checking IVP user account ACMS$IVP The ACMS$IVP account used to execute the IVP is not available. You must supply a UIC and password for this account so that it can be created; this must be done before the IVP can be executed. Please enter the UIC for the ACMS$IVP account, in the form [ggggg,nnnnnn] * UIC: [400,200] Please enter a password of at least 8 characters, using only the following characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789$_ * Password: * Verification: SUMMARY OF THIS ACMS INSTALLATION --------------------------------- The following steps will be taken to complete this installation: o The ACMS system will be shut down (via SYS$STARTUP:ACMSTOP.COM) o ACMS component software will be installed o LSE environment will be updated for ACMS o Oracle Trace facility text library will be updated for ACMS o CDD-related ACMS files will be installed o ACMS samples will be installed o ACMS Request Interface samples will be installed o The ACMS postinstallation procedure will be executed o The ACMS IVP will be executed The rest of the installation will take approximately 15 minutes. Execution of the IVP will take approximately 3 minutes. Note that this time is heavily dependent your system load, hardware and kit media. The time mentioned was measured on a stand-alone VAX 8530 system with a disk-resident kit. Your time may vary. * Do you want to continue the installation [YES]? The interactive portion of this installation is complete; no further questions will be asked until the post installation. Installation of ACMS started at 09:54 on 22-JUN-2001 Restoring savesets %VMSINSTAL-I-RESTORE, Restoring product save set J ... %VMSINSTAL-I-RESTORE, Restoring product save set K ... %VMSINSTAL-I-RESTORE, Restoring product save set L ... %VMSINSTAL-I-RESTORE, Restoring product save set M ... %VMSINSTAL-I-RESTORE, Restoring product save set N ... %VMSINSTAL-I-RESTORE, Restoring product save set O ... %VMSINSTAL-I-RESTORE, Restoring product save set P ... Checking/creating ACMS directories %VMSINSTAL-I-SYSDIR, This product creates system disk directory VMI$ROOT:[SYSHLP.EXAMPLES.ACMSMGMT]. %CREATE-I-EXISTS, VMI$ROOT:[SYSHLP.EXAMPLES.ACMSMGMT] already exists Updating LSE Updating Oracle Trace definition text library Deleting old CDD$TOP.ACMS$DIR.ACMS$WORKSPACES Creating CDD$TOP.ACMS$DIR.ACMS$WORKSPACES Deleting old RI sample CDD nodes... Restoring RI sample application CDD nodes... %VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named ACMS$IVP. %UAF-I-PWDLESSMIN, new password is shorter than minimum password length %UAF-I-ADDMSG, user record successfully added %UAF-I-RDBADDMSGU, identifier ACMS$IVP value [000400,000200] added to rights database Account ACMS$IVP created Updating account ACMS$IVP to current parameters %VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP. %UAF-I-MDFYMSG, user record(s) updated %VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP. %UAF-I-MDFYMSG, user record(s) updated %VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP. %UAF-I-MDFYMSG, user record(s) updated %VMSINSTAL-I-ACCOUNT, This installation updates an ACCOUNT named ACMS$IVP. %UAF-I-MDFYMSG, user record(s) updated Account ACMS$IVP updated ACMS$IVP account created/updated -- IVP selected to run Providing files Provided DCL command file ACMS.CLD Provided DCL help file ACMSHELP.HLP All other files provided - list is in AMAMA$DKA500:[SYS0.SYSCOMMON.][SYSEXE]ACMS044_FILES.DAT Installation of ACMS completed successfully at 10:03 on 22-JUN-2001 %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... COPYRIGHT (c) 1999 Compaq Computer Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. The software contained on this media is proprietary to and embodies the confidential technology of Compaq Computer Corporation. Possession, use, duplication or dissemination of the software and media is authorized only pursuant to a valid written license from Compaq Computer Corporation. RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, as applicable. ACMS postinstallation procedure started at 10:07 on 22-JUN-2001 ************************************************************** * * * NOTE: Refer to Chapter 4 in the ACMS Installation Guide * * for other important postinstallation work. * * * ************************************************************** Checking/creating logical ACMS$DIRECTORY ---------------------------------------- The procedure checks for the logical ACMS$DIRECTORY, which must be defined /SYSTEM /SUPERVISOR and must point to an existing disk directory. ACMS$DIRECTORY is not defined as a /SYSTEM /SUPERVISOR logical Please supply an equivalence string for the ACMS$DIRECTORY logical. Equivalence string [ SYS$SYSDEVICE:[ACMS.ADB] ]: ACMS$DIRECTORY is defined as SYS$SYSDEVICE:[ACMS.ADB] ACMS$DIRECTORY logical is acceptable (press <RETURN> to continue) Converting ACMSGEN parameter files ---------------------------------- This procedure searches for all ACMSGEN parameter files located in SYS$SYSDEVICE:[SYS*.SYSEXE] and SYS$COMMON:[SYSEXE], and converts them to be compatible with the current version of ACMS. If you are upgrading from a version of ACMS prior to V4.0, you must perform this conversion. Do you want to convert existing ACMSGEN parameter files [Y]? Converting SYS$SYSDEVICE:[SYS0.SYSEXE]ACITVE.ACM Converting SYS$COMMON:[SYSEXE]ACMSPAR.ACM The ACMSGEN parameter files listed above have been converted; if other parameter files exist on your system, they must be updated as follows: $ RUN SYS$SYSTEM:ACMSGEN ACMSGEN> USE file-specification ACMSGEN> WRITE file-specification ACMSGEN> EXIT (press <RETURN> to continue) Converting ACMS UDF and DDF files --------------------------------- The procedure searches for the files pointed to by the ACMSUDF and ACMSDDF logicals, if they exist, and then for AMCSUDF.DAT or ACMSDDF.DAT in SYS$SYSROOT:[SYS*], and converts them to be compatible with the current version of ACMS. If you are upgrading from a version of ACMS prior to V3.1, you must perform this conversion. Do you want to convert existing ACMS UDF and DDF files [Y]? Converting UDF file SYS$COMMON:[SYSEXE]ACMSUDF.DAT Converting DDF file SYS$COMMON:[SYSEXE]ACMSDDF.DAT (press <RETURN> to continue) Checking/creating ACMS UDF and DDF files ---------------------------------------- The procedure checks for ACMSUDF.DAT and ACMSDDF.DAT, first through the logicals ACMSUDF and ACMSDDF, and then in SYS$COMMON:[SYSEXE], and creates them if they're not already present from a previous installation. No /SYSTEM /EXECUTIVE logical ACMSUDF found SYS$COMMON:[SYSEXE]ACMSUDF.DAT exists No /SYSTEM /EXECUTIVE logical ACMSDDF found SYS$COMMON:[SYSEXE]ACMSDDF.DAT exists (press <RETURN> to continue) Checking/creating ACMS_SETUP.COM -------------------------------- The procedure checks for site-specific startup procedure ACMS_SETUP.COM in SYS$COMMON:[SYS$STARTUP], and creates a template if the file doesn't already exist. Creating SYS$COMMON:[SYS$STARTUP]ACMS_SETUP.COM ACMS_SETUP.COM will be executed the next time you invoke SYS$STARTUP:ACMSTART.COM. Please review ACMS_SETUP.COM and adjust it to reflect the needs of your ACMS environment. It can be used to perform these site-specific startup steps: - define the ACMS logical ACMS$DIRECTORY - install ACMS utilities as shareable images - define ACMS logicals such as ACMS$AUDIT_LOG, ACMS$SWL_LOG, ACMS$NOTICE, ACMS$EDIT, ADU$EDIT and SWLUP$EDIT - start the ACMS system and applications (press <RETURN> to continue) Checking/copying ACMS menu files -------------------------------- The procedure checks for the ACMS command menu and default user menu in ACMS$DIRECTORY, and copies them from SYS$COMMON:[SYSEXE] if they're not already in ACMS$DIRECTORY from a previous installation. ACMS$DIRECTORY:ACMSCMD.MDB already exists -- not copied ACMS$DIRECTORY:ACMS.MDB already exists -- not copied ************************************************************** * * * NOTE: Refer to Chapter 4 in the ACMS Installation Guide * * for other important postinstallation work. * * * ************************************************************** Checking/creating ACMS$MGMT_SETUP.COM ------------------------------------- ************************************************************** * * * NOTE: Refer to the Managing the Remote Manager chapter * * in the ACMS Remote Systems Management Guide for more * * information. * * * ************************************************************** Do you want to SETUP and CONFIGURE the ACMS Remote System Manager [Y]? Creating SYS$STARTUP:ACMS$MGMT_SETUP.COM Do you want to allow Proxy Authorization [Y]? (ACMS$MGMT_CONFIG) Enter the file specification for the configuration file used by the ACMS Remote Manager Equivalence string [ SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM ]: (ACMS$MGMT_TEMP) Enter the directory where the temp command procedures will be created Equivalence string [ SYS$SPECIFIC:[ACMS_RM.TMP] ]: SYS$SPECIFIC:[ACMS_RM.TMP] does not exist Do you want to create it [Y]? Created directory SYS$SPECIFIC:[ACMS_RM.TMP] (ACMS$MGMT_LOG) Enter the directory for the ACMS Remote Manager's Log file Equivalence string [ SYS$SPECIFIC:[ACMS_RM.LOG] ]: SYS$SPECIFIC:[ACMS_RM.LOG] does not exist Do you want to create it [Y]? Created directory SYS$SPECIFIC:[ACMS_RM.LOG] (ACMS$MGMT_CREDS_DIR) Enter the directory for the ACMS Remote Manager Credential's Equivalence string [ SYS$SPECIFIC:[ACMS_RM.CREDS] ]: SYS$SPECIFIC:[ACMS_RM.CREDS] does not exist Do you want to create it [Y]? Created directory SYS$SPECIFIC:[ACMS_RM.CREDS] (ACMS$MGMT_SNAPSHOT) Enter the directory where the snapshot data will be stored Equivalence string [ SYS$SPECIFIC:[ACMS_RM.SNAPSHOT] ]: SYS$SPECIFIC:[ACMS_RM.SNAPSHOT] does not exist Do you want to create it [Y]? Created directory SYS$SPECIFIC:[ACMS_RM.SNAPSHOT] (ACMS$MGMT_ERR_LOG) Enter the directory where the Error Log data will be stored Equivalence string [ SYS$SPECIFIC:[ACMS_RM.ERR_LOG] ]: SYS$SPECIFIC:[ACMS_RM.ERR_LOG] does not exist Do you want to create it [Y]? Created directory SYS$SPECIFIC:[ACMS_RM.ERR_LOG] SYS$STARTUP:ACMS$MGMT_SETUP.COM will be executed the next time SYS$STARTUP:ACMSTART.COM is invoked. Please review ACMS$MGMT_SETUP.COM and adjust it to reflect the needs of your ACMS Remote Systems Management environment. Creating/Checking the RM Identifiers and SNMP account Checking for user account ACMS$SNMP Identifier for ACMS$MGMT_READ does not exist %UAF-I-RDBADDMSG, identifier ACMS$MGMT_READ value %X8001074D added to rights database Identifier for ACMS$MGMT_WRITE does not exist %UAF-I-RDBADDMSG, identifier ACMS$MGMT_WRITE value %X8001074E added to rights database Identifier for ACMS$MGMT_OPER does not exist %UAF-I-RDBADDMSG, identifier ACMS$MGMT_OPER value %X8001074F added to rights database Identifier for ACMS$MGMT_SYSUPD does not exist %UAF-I-RDBADDMSG, identifier ACMS$MGMT_SYSUPD value %X8001074G added to rights database The ACMS$SNMP account used to execute ACMSMGR SNMP commands is not available. You must supply a UIC and password for this account so that it can be created; this must be done before the $MGMT can be executed. Please enter the UIC for the ACMS$SNMP account, in the form [ggggg,nnnnnn] UIC: [400,201] Please enter a password of at least 8 characters, using only the following characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789$_ * Password: * Verification: Account ACMS$SNMP created Updating account ACMS$SNMP to current parameters Account ACMS$SNMP updated Checking config file SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM Creating a new Remote Mananger config file SYS$SYSROOT:[SYSEXE]ACMS$MGMT_CONFIG.ACM %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed %ACMSMGMT-S-NORMAL, Operation completed Entity Entity Coll Collection Name Type Class State ----------------------------------------------------------------------------- * * id enabled * * config enabled * * runtime disabled * * pool disabled * * error disabled The ACMS Remote System Manager has been configured. The command procedure SYS$STARTUP:ACMS$MGMT_ENV.COM should be invoked to define the symbols for starting the ACMS Remote Manager and running the Remote Manager client ACMS postinstallation procedure completed successfully at 10:40 on 22-JUN-2001 %RUN-S-PROC_ID, identification of created process is 3C600125 COPYRIGHT (c) 1999 Compaq Computer Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. The software contained on this media is proprietary to and embodies the confidential technology of Compaq Computer Corporation. Possession, use, duplication or dissemination of the software and media is authorized only pursuant to a valid written license from Compaq Computer Corporation. RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, as applicable. ACMS Installation Verification Procedure started at 10:41 on 22-JUN-2001 ACMS V4.4-0 Current System State: STARTED Time: 22-JUN-2001 10:43:21.94 Terminal Subsystem State: STARTED Queued Task Initiator State: STOPPED System Auditing State: ENABLED Active ACMS Users User Name Submitter ID Agent PID Device SYSTEM 00010014 3C600121 RTA1: Active Execution Controllers Application Name Process Name User Name Exc PID ACMSIVP ACMS01EXC001000 ACMS$IVP 3C60012A ACMS Installation Verification Procedure completed successfully at 10:43 on 22-JUN-2001 Results of IVP are in SYS$COMMON:[SYSUPD]ACMSIVP.LOG Installation of ACMSDEVV_ V4.4 completed at 10:43 Enter the products to be processed from the next distribution volume set. * Products: exit VMSINSTAL procedure done at 10:44