 |
≫ |
|
|
|
日本語 Advanced Server for OpenVMS
日本語 Advanced Server for OpenVMS
インストレーションおよび構成ガイド
付録 D
外部認証ソフトウェアのインストレーションの例
次に，外部認証ソフトウェアのみをインストールする場合のインストレーション・ダイアログの例を示します。このインストレーションの後は，構成プロシージャPWRK$CONFIGは使用できないことに注意してください。使用しようとすると，例に示すようなメッセージが表示されます。
$ PRODUCT INSTALL ADVANCEDSERVERJA [Return]
The following product has been selected:
CPQ AXPVMS ADVANCEDSERVERJA V7.3-B Layered Product [Installed]
Do you want to continue? [YES] [Return]
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
CPQ AXPVMS ADVANCEDSERVERJA V7.3-B: Advanced Server for OpenVMS
Copyright 2006 Hewlett-Packard Development Company, L.P.
Advanced Server is sold by Hewlett-Packard Development Company
Advanced Server requires PAK PWLMXXXCA07.03 for each client.
This installation procedure requires that all the following
conditions are satisfied:
1. This procedure is running on an Alpha processor.
2. The system is running OpenVMS 7.3-2 or later.
3. All required privileges are currently enabled.
4. No PATHWORKS or Advanced Server images are running
on this node or anywhere in the cluster.
5. No files from a PATHWORKS (NetWare) kit are present
on this system disk.
6. No files from any PATHWORKS or Advanced Server kit
are in SYS$SPECIFIC on this system disk.
This procedure checks if the conditions are satisfied.
If they are satisfied, the procedure continues.
If not, the procedure stops.
Do you want to continue? [YES] [Return]
Select one of the numbered options:
1. Install the complete Advanced Server [default]
2. Install only the License Server
3. Install only the external authentication images
4. Install both the License Server and the
external authentication images
Option: [1] 3 [Return]
A PWRK$STREAMSOS_V*.EXE execlet from a previous kit is currently
loaded in memory on this node.
You must reboot this node before starting the product on this node.
Select an option:
1. Delay reboot as long as possible on all nodes. [default]
2. Prevent PWRK$CONFIG configuration on any node using this system
disk until after reboot.
3. Prevent PWRK$CONFIG configuration on all nodes until after reboot.
4. Prevent startup on any node using this system disk until
after reboot.
5. Prevent startup on all nodes until after reboot.
Option: [1] 1 [Return]
* This product does not have any configuration options.
Execution phase starting ...
The following product will be installed to destination:
CPQ AXPVMS ADVANCEDSERVERJA V7.3-B DISK$ALPHAV82:[VMS$COMMON.]
Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%
...100%
The following product has been installed:
CPQ AXPVMS ADVANCEDSERVERJA V7.3-B Layered Product
%PCSI-I-IVPEXECUTE, executing test procedure for CPQ AXPVMS
ADVANCEDSERVERJA V7.3-B ...
Copyright 2006 Hewlett-Packard Development Company, L.P.
Starting Installation Verification Procedure
for Advanced Server V7.3B for OpenVMS
%PWRK-I-NORMAL, IVP completed successfully
%PCSI-I-IVPSUCCESS, test procedure completed successfully
$
$ @SYS$UPDATE:PWRK$CONFIG [Return]
%DCL-E-OPENIN, error opening SYS$SYSROOT:[SYSUPD]PWRK$CONFIG.COM; as
input
-RMS-E-FNF, file not found
|
|
