Jump to 
content
HP.com Home Products and Services Support and Drivers Solutions How to Buy
»  Contact HP

 

HP C

HP C
Installation Guide for
OpenVMS Alpha Systems


Previous Contents

2.2 Error Recovery

If errors occur during the installation itself or when the Installation Verification Procedure (IVP) is running, VMSINSTAL displays failure messages. If the installation fails, you see the following message:


%VMSINSTAL-E-INSFAIL, The installation of HP C V7.n has failed.

If the IVP fails, you see these messages:


The HP C V7.n Installation Verification Procedure failed.
%VMSINSTAL-E-IVPFAIL, The IVP for HP C V7.n has failed.

Errors can occur during the installation if any of the following conditions exist:

  • The operating system version is incorrect.
  • A prerequisite software version is incorrect.
  • Quotas necessary for successful installation are insufficient.
  • System parameter values for successful installation are insufficient.
  • The OpenVMS help library is currently in use.
  • The product license has not been registered and loaded.

For descriptions of the error messages generated by these conditions, see the OpenVMS documentation on system messages, recovery procedures, and OpenVMS software installation. If you are notified that any of these conditions exist, you should take the appropriate action as described in the message. For information on installation requirements, see Section 1.5.

If the installation fails, you must restart the installation procedure from step 2 in Section 2.1. For an explanation of any system messages, see the OpenVMS System Messages and Recovery Procedures Reference Manual or the online HELP/MESSAGE facility. If the installation fails due to an IVP failure, contact a HP field service representative.


Chapter 3
After Installing HP C

HP C is now installed and can be invoked by all users with the CC command.

The installation procedure modifies the DCL command table so that the CC command is recognized and processed. However, the previous command table is still in effect for those users who are currently logged in. All logged-in users who want to use the CC command must log out and log in again, or use the following DCL command:


$ SET COMMAND /TABLES=SYS$LIBRARY:DCLTABLES

You can perform the following system management tasks after HP C is installed:

  • Running the Installation Verification Procedure (IVP) separately
  • Editing the system startup files
  • Making the product usable on an OpenVMS cluster
  • Setting user account privileges and quotas
  • Enhancing performance
  • Removing the compiler from your system
  • Reporting problems

The following sections describe these tasks in detail.

3.1 Running the Installation Verification Procedure Separately

You usually run the IVP during installation. If you want to run the IVP separately to ensure the integrity of installed files if system problems should occur, execute the following command procedure:


$ @SYS$TEST:DECC$IVP.COM

If the IVP fails for any reason, the following message is displayed:


HP C VERSION 7.n TEST FAILED

3.2 Editing the System Startup File

You must edit the system startup file to provide for automatic startup of HP C when your system is rebooted.

Add the command line that starts HP C to the system startup file, SYS$MANAGER:SYSTARTUP_VMS.COM. HP C cannot start until after the network has started. You must position this new command line after the line that invokes the network startup command procedure. The following example shows the network startup command line followed by the HP C startup command line:


$ @SYS$MANAGER:STARTNET.COM
     .
     .
     .
$ @SYS$STARTUP:DECC$STARTUP.COM

3.3 OpenVMS Cluster Considerations

If you want to run HP C on multiple nodes of an OpenVMS cluster, first check to see that you have the appropriate software license (see Section 1.4). Then perform the following steps after you install HP C:

  1. Enter the LICENSE LOAD command, as described in the HP OpenVMS License Management Utility Manual, to activate the license on each node in the cluster on which HP C is to be executed.
  2. Log in to the installation node and use the OpenVMS INSTALL Utility to determine whether DECC$COMPILER.EXE is a known image:


    $ INSTALL
    INSTALL> LIST SYS$SYSTEM:DECC$COMPILER.EXE
    

    If the output of the preceding LIST command shows DECC$COMPILER.EXE to be a known image, perform all of the following steps. Otherwise, perform all of the following steps except step 4b.

  3. Log in to a node on the cluster.
  4. Run the OpenVMS INSTALL utility as described in Section 3.5.2, with the following exceptions:
    1. After invoking the OpenVMS INSTALL utility, enter the following command:


         INSTALL> REPLACE SYS$LIBRARY:DCLTABLES.EXE
      

      This command updates the DCL tables. It should be entered on each node in the cluster, regardless of whether you activated the HP C license (step 1) on all of the nodes.

    2. If DECC$COMPILER.EXE was established as a known image using the INSTALL utility, enter the following command:


         INSTALL> REPLACE SYS$SYSTEM:DECC$COMPILER.EXE
      

      This command replaces the INSTALL entry for DECC$COMPILER.EXE. It should be entered only on those nodes on which you activated the HP C license in step 1. (In most cases, all of the nodes will be licensed.)

  5. Repeat steps 3 and 4 for each node of the cluster.

3.4 User Account Requirements

Some products cannot be used unless certain privilege and quota requirements are met by user accounts. The following sections describe the privilege and quota requirements needed to work with HP C.

3.4.1 User Privileges

To use HP C, each account must have TMPMBX and NETMBX privileges. Use the OpenVMS AUTHORIZE utility to determine whether users have the privileges they require.

3.4.2 User Account Quotas

To use HP C, a user account does not need to meet any special quota requirements. However, for users who will be compiling very large programs (many program units compiled together), consider adjusting working set (WSDEF, WSQUOTA, WSEXTENT) and pagefile (PGFLQUOTA) account quotas to improve performance.

See Section 1.5.3.2 for a description of how to verify and change account quotas.

3.5 Enhancing HP C Performance

The following sections include information on system tuning and explain how to install HP C as a shared image.

3.5.1 Tuning Your System

After you install HP C, you might want to adjust your system to enhance performance or lower the use of some system resources. General information about tuning an OpenVMS system is included in the Guide to OpenVMS Performance Management.

3.5.2 Installing HP C as a Shared Image

If you expect HP C to be used extensively on your system, you can reduce the system overhead and memory requirements by installing it as a shared image. To install HP C as a shared image on a system that is currently running, use the OpenVMS INSTALL utility. It is recommended that you install HP C as shared on a system that has been rebooted recently, because the available space in the global page table is less likely to be fragmented.

To install HP C as a shared image:

  1. Determine the number of available global pagelets and global sections on your system. You will need to increase them. Section 1.5.2 contains guidelines for showing and setting these parameters.
  2. After you have reset the system parameter values, run the following .com file:


    $ $ @SYS$STARTUP:DECC$STARTUP
    

3.6 Removing the Compiler from Your System

A command procedure CC$PRODUCT_REMOVE is available should you wish to remove the HP C compiler product from your system for any reason. The procedure performs the equivalent of a PCSI PRODUCT REMOVE command.

Before issuing the command procedure, you are required to disable the product license to prevent a compilation from interfering with the delete process.

If the compiler has been installed as a shared image, the command procedure will uninstall the image.

The command procedure takes no parameters and can be run as follows:


$ @SYS$SYSTEM:CC$PRODUCT_REMOVE 
 
Do you wish to proceed with removing HP C <No>? Yes [Ret] 

Enter "Yes" to remove the compiler from your system.

3.7 Getting Help and Reporting Problems

If you encounter a problem while using HP C, see the release notes. If the problem is unresolved, report it to HP. Depending on the type of support you have and the nature of the problem, take one of the following actions:

  • If you have a Software Product Services Support Agreement, contact your Customer Support Center (CSC) by telephone or by using the electronic means provided with your support agreement (such as DSNlink). The CSC provides telephone support for high-level advisory and remedial assistance. When you initially contact the CSC, indicate the following:
    • The name and version number of the operating system you are using
    • The product name (HP C) and the version number of HP C you are using
    • The hardware system you are using (such as a model number)
    • A brief description of the problem (one sentence if possible)
    • How critical the problem is

    When you submit information electronically or are speaking on the phone to the appropriate HP C support specialist, you can provide more detailed information. The information should include the specific commands used to compile and link the program, the error messages displayed, and relevant detailed information (possibly including source program listings). Please attempt to narrow the cause of the problem to a specific module or lines of code.
    CSC personnel might ask for additional information, such as listings of any command files, INCLUDE and COPY files, relevant data files, and so forth. If the program is longer than 50 lines, submit a copy of it electronically or provide machine-readable media (floppy diskette or magnetic tape).
  • If the problem is related to HP C documentation, you can report the problem to the CSC (if you have a Software Product Services Support Agreement and the problem is severe); otherwise, send your comments about HP C documentation to the following Internet address:
    c_docs@hp.com
    To obtain information about purchasing a HP Software Product Services Support Agreement or other support services, please contact your local HP sales representative.


Appendix A
Sample Installations

This appendix contains sample installations of the HP C kit. These are only samples. Sometimes the installation procedure is modified in maintenance updates of this product.

Because this installation guide is not always revised for maintenance updates, be sure to read the Read Before Installing HP C for OpenVMS Alpha Systems Version 7.n letter before you install this product. This letter notes any significant changes to the installation samples shown here.

Depending on which layered products you have on your system, you might see additional messages and questions when you perform your installation.

The sample installations assume that DECnet has been shut down, and that no users are logged on to your system. The Installation Verification Procedure (IVP) runs at the end of the installations.

A.1 Initial Installation

This sample was run on a system that had no previous version of HP C installed.


$ @sys$update:vmsinstal CC071 DKA400:[CC071.KIT] 
 
        OpenVMS AXP Software Product Installation Procedure V7.2-1 
 
It is 11-June-2005 at 12:58. 
 
Enter a question mark (?) at any time for help. 
 
%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account. 
%VMSINSTAL-W-ACTIVE, The following processes are still active: 
       TCPIP$NTP 
       TCPIP$PORTM 
* Do you want to continue anyway [NO]? yes [Return]
 
* Are you satisfied with the backup of your system disk [YES]? [Return]
 
The following products will be processed: 
 
  CC V7.1 
 
        Beginning installation of CC V7.1 at 12:58 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
 
  HP C Version 7.1 for OpenVMS Alpha Systems 
 
  Copyright 2005 Hewlett-Packard Development Company, L.P. 
 
  Confidential computer software. Valid license from HP required for 
  possession, use or copying. Consistent with FAR 12.211 and 12.212, 
  Commercial Computer Software, Computer Software Documentation, and 
  Technical Data for Commercial Items are licensed to the U.S. 
  Government under vendor's standard commercial license. 
 
        Product:      C 
        Producer:     DEC 
        Version:      7.1 
        Release Date: dd-mmm-2005 
 
* Does this product have an authorization key registered and loaded? yes [Return]
 
    This kit contains an Installation Verification Procedure (IVP) 
    to verify the correct installation of HP C.  The IVP will 
    be left in: 
 
        SYS$TEST:DECC$IVP.COM 
 
    After the installation is complete, you can invoke the command 
    file at any time to verify that HP C is installed and 
    working correctly. 
 
* Do you want to run the IVP after the installation [YES]? [Return]
 
    HTML, postscript and text versions of the HP C Users Guide, 
    Language Reference Manual and RTL Reference Manual may be optionally 
    installed into SYS$COMMON:[SYSHLP.CC$ALPHA_HELP_071]. 
    These documents consume approximately 60000 blocks. 
 
* Should these manuals be provided [NO]: [Return]
 
    This kit contains a file summarizing the new features, changes, 
    restrictions, and compatibility issues in this release of HP C. 
    This file is named CC.RELEASE_NOTES and has been placed in SYS$HELP:. 
 
    This file contains information valuable to HP C programmers. 
    Please inform your user community of this file's existence. 
 
* Do you want to purge files replaced by this installation [YES]? [Return]
 
    You have answered all of the questions for this installation.  The 
    installation will now execute in 5 to 15 minutes without further 
    intervention, depending on your configuration, installation media, 
    and so forth. 
 
        The C Runtime Library headers and Starlet headers are installed as 
        a Text Library (.TLB).  The traditional text form  of the headers 
        (.H files) is also provided (for  reference  purposes only) in 
        the directories: SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF] and 
        SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C]. 
 
        Please note that the compiler does not search the reference areas 
        SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF] and 
        SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C] during compilation. 
        Instead headers are taken from the text library. 
 
        The CXXDEMANGLE utility appears on this system. 
        Installation of the kit version will not be performed. 
 
%VMSINSTAL-I-SYSDIR, This product creates system disk directory 
                                         VMI$ROOT:[SYSHLP.CC$ALPHA_HELP_071]. 
 
    Your OpenVMS system will now be modified to include the 
    following new and modified files: 
 
    [SYSEXE]DECC$COMPILER.EXE             [new] 
    [SYSMSG]DECC$COMPILER_MSG.EXE         [new] 
    [SYSHLP]HELPLIB.HLB                   [modified] 
    [SYSHLP]CC$HELP*.HTML                 [new] 
    [SYSHLP.CC$ALPHA_HELP_071]            [new] 
    [SYSHLP]CC.RELEASE_NOTES              [new] 
    [SYSHLP]CC_RELEASE_NOTES.PS           [new] 
    [SYSLIB]DCLTABLES.EXE                 [modified] 
    [SYSLIB]DECC$RTLDEF.TLB               [new] 
    [DECC$LIB.REFERENCE.SYS$STARLET_C]*.H [new] 
    [DECC$LIB.REFERENCE.DECC$RTLDEF]*.H   [new] 
    [SYS$STARTUP]DECC$STARTUP.COM         [modified] 
    [SYSEXE]DECC$SET_VERSIONS.COM         [new] 
    [SYSEXE]DECC$SHOW_VERSIONS.COM        [new] 
    [SYSTEST]DECC$IVP.COM                 [new] 
 
    The file SYS$STARTUP:DECC$STARTUP.COM contains commands to be 
    executed at system startup to allow for the best compilation 
    performance.  You may want to invoke this command file from your 
    system's site-specific start up file.  This command file does not 
    have to be invoked for correct operation of HP C. 
 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
 
   Copyright 2005 Hewlett-Packard Development Company, L.P. 
 
   Confidential computer software. Valid license from HP required for 
   possession, use or copying. Consistent with FAR 12.211 and 12.212, 
   Commercial Computer Software, Computer Software Documentation, and 
   Technical Data for Commercial Items are licensed to the U.S. 
   Government under vendor's standard commercial license. 
 
    Beginning HP C V7.1 Installation Verification Procedure 
 
    Image Check Complete 
    License Check Complete 
    Version Check Complete 
    Message Check Complete 
    Header Check Complete 
    Run Time Library Check Complete 
 
    HP C V7.1 Installation Verification Procedure Successful 
 
        Installation of CC V7.1 completed at 13:10 
                                                                
    Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY 
    Creating installation data file: VMI$ROOT:[SYSUPD]CC071.VMI_DATA 
 
        VMSINSTAL procedure done at 13:11 

A.2 Upgrade Installation

This sample was run on a system that had a previous version of HP C installed. The system is upgraded to the new version of the compiler, which replaces the old one.


 
$ @sys$update:vmsinstal CC071 DKA400:[CC071.KIT] 
 
        OpenVMS Alpha Software Product Installation Procedure V7.2-1 
 
It is 11-June-2005 at 14:24. 
 
Enter a question mark (?) at any time for help. 
 
%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account. 
%VMSINSTAL-W-ACTIVE, The following processes are still active: 
       TCPIP$NTP 
       TCPIP$PORTM 
* Do you want to continue anyway [NO]? yes [Return]
 
* Are you satisfied with the backup of your system disk [YES]? [Return]
 
The following products will be processed: 
 
  CC V7.1 
 
        Beginning installation of CC V7.1 at 14:24 
 
(Waiting for demon to record initial state... 
...done) 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
 
  HP C Version 7.1 for OpenVMS Alpha Systems 
 
  Copyright 2005 Hewlett-Packard Development Company, L.P. 
 
  Confidential computer software. Valid license from HP required for 
  possession, use or copying. Consistent with FAR 12.211 and 12.212, 
  Commercial Computer Software, Computer Software Documentation, and 
  Technical Data for Commercial Items are licensed to the U.S. 
  Government under vendor's standard commercial license. 
 
    A C V6.2-008 compiler was found on your system. 
    Type YES to keep this compiler on your system either as 
    the default system compiler or as an alternate compiler. 
    Type NO to supersede C V6.2-008. 
 
* Should the existing V6.2-008 system compiler be preserved [NO]: [Return]
 
        Product:      C 
        Producer:     DEC 
        Version:      7.1 
        Release Date: dd-mmm-2005 
 
* Does this product have an authorization key registered and loaded? yes [Return]
 
    This kit contains an Installation Verification Procedure (IVP) 
    to verify the correct installation of HP C.  The IVP will 
    be left in: 
 
        SYS$TEST:DECC$IVP.COM 
 
    After the installation is complete, you can invoke the command 
    file at any time to verify that HP C is installed and 
    working correctly. 
 
* Do you want to run the IVP after the installation [YES]? [Return]
 
    HTML, postscript and text versions of the HP C Users Guide, 
    Language Reference Manual and RTL Reference Manual may be optionally 
    installed into SYS$COMMON:[SYSHLP.CC$ALPHA_HELP_071]. 
    These documents consume approximately 60000 blocks. 
 
* Should these manuals be provided [NO]: yes [Return]
 
    This kit contains a file summarizing the new features, changes, 
    restrictions, and compatibility issues in this release of HP C. 
    This file is named CC.RELEASE_NOTES and has been placed in SYS$HELP:. 
 
    This file contains information valuable to HP C programmers. 
    Please inform your user community of this file's existence. 
 
* Do you want to purge files replaced by this installation [YES]? [Return]
 
    You have answered all of the questions for this installation.  The 
    installation will now execute in 5 to 15 minutes without further 
    intervention, depending on your configuration, installation media, 
    and so forth. 
 
        The C Runtime Library headers and Starlet headers are installed as 
        a Text Library (.TLB).  The traditional text form  of the headers 
        (.H files) is also provided (for  reference  purposes only) in 
        the directories: SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF] and 
        SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C]. 
 
        Please note that the compiler does not search the reference areas 
        SYS$COMMON:[DECC$LIB.REFERENCE.DECC$RTLDEF] and 
        SYS$COMMON:[DECC$LIB.REFERENCE.SYS$STARLET_C] during compilation. 
        Instead headers are taken from the text library. 
 
        The CXXDEMANGLE utility appears on this system. 
        Installation of the kit version will not be performed. 
 
    Your OpenVMS system will now be modified to include the 
    following new and modified files: 
 
    [SYSEXE]DECC$COMPILER.EXE             [new] 
    [SYSMSG]DECC$COMPILER_MSG.EXE         [new] 
    [SYSHLP]HELPLIB.HLB                   [modified] 
    [SYSHLP]CC$HELP*.HTML                 [new] 
    [SYSHLP.CC$ALPHA_HELP_071]            [new] 
    [SYSHLP]CC.RELEASE_NOTES              [new] 
    [SYSHLP]CC_RELEASE_NOTES.PS           [new] 
    [SYSLIB]DCLTABLES.EXE                 [modified] 
    [SYSLIB]DECC$RTLDEF.TLB               [new] 
    [DECC$LIB.REFERENCE.SYS$STARLET_C]*.H [new] 
    [DECC$LIB.REFERENCE.DECC$RTLDEF]*.H   [new] 
    [SYS$STARTUP]DECC$STARTUP.COM         [modified] 
    [SYSEXE]DECC$SET_VERSIONS.COM         [new] 
    [SYSTEST]DECC$IVP.COM                 [new] 
 
    The file SYS$STARTUP:DECC$STARTUP.COM contains commands to be 
    executed at system startup to allow for the best compilation 
    performance.  You may want to invoke this command file from your 
    system's site-specific start up file.  This command file does not 
    have to be invoked for correct operation of HP C. 
 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
    Copyright 2005 Hewlett-Packard Development Company, L.P. 
 
    Confidential computer software. Valid license from HP required for 
    possession, use or copying. Consistent with FAR 12.211 and 12.212, 
    Commercial Computer Software, Computer Software Documentation, and 
    Technical Data for Commercial Items are licensed to the U.S. 
    Government under vendor's standard commercial license. 
 
    Beginning HP C V7.1 Installation Verification Procedure 
 
    Image Check Complete 
    License Check Complete 
    Version Check Complete 
    Message Check Complete 
    Header Check Complete 
    Run Time Library Check Complete 
 
    HP C V7.1 Installation Verification Procedure Successful 
 
        Installation of CC V7.1 completed at 14:36 
 
    Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY 
 
    Creating installation data file: VMI$ROOT:[SYSUPD]CC071.VMI_DATA 
 
        VMSINSTAL procedure done at 14:40 


Previous Next Contents

Privacy statement Using this site means you accept its terms
© 2007 Hewlett-Packard Development Company, L.P.