HP OpenVMS Cluster Systems

P
Packet loss
caused by network congestion #1
caused by network congestion #2
caused by too many HELLO datagrams
NISCA retransmissions
Packets
capturing data
maximum size on Ethernet
maximum size on FDDI
transmission window size
PADRIVER port driver
Page files (PAGEFILE.SYS)
created by CLUSTER_CONFIG.COM procedure
created by CLUSTER_CONFIG.COM procedure
Page sizes
hardware
AUTOGEN determination
PAKs (Product Authorization Keys)
Partner programs
capturing retransmitted packets
Passwords
VMS$PASSWORD_DICTIONARY.DATA file #1
VMS$PASSWORD_DICTIONARY.DATA file #2
VMS$PASSWORD_HISTORY.DATA file
VMS$PASSWORD_POLICY.EXE file #1
VMS$PASSWORD_POLICY.EXE file #2
PASTDGBUF system parameter
Paths
specifying preferred for MSCP-served disks
PBDRIVER port driver
PE$IP_CONFIG.DAT file
authorization elements
PEDRIVER
channel selection and congestion control
PEDRIVER LAN devices
SDA monitoring
PEDRIVER port driver #1
PEDRIVER port driver #2
congestion control
HELLO IP multicasts
HELLO IP unicasts
HELLO multicasts
implementing the NISCA protocol
NISCS_LOAD_PEA0 system parameter
retransmission
SDA monitoring
PI protocol
part of the SCA architecture #1
part of the SCA architecture #2
PIDRIVER port driver #1
PIDRIVER port driver #2
PK*DRIVER port driver
PMDRIVER port driver
PNDRIVER port driver
POLYCENTER Console Manager (PCM)
Port
software controllable selection
Port communications #1
Port communications #2
Port drivers
device error-log entries
error-log entries
Port failures
PPC protocol
part of NISCA transport protocol #1
part of NISCA transport protocol #2
PPD level
part of PPD protocol #1
part of PPD protocol #2
PPD protocol
part of SCA architecture #1
part of SCA architecture #2
Print queues #1
Print queues #2
assigning unique name to
clusterwide generic
setting up clusterwide
starting
Processes
quotas #1
quotas #2
Programs
analyze retransmission errors
LAN analyzer partner
LAN analyzer scribe
LAN analyzer starter
Protocols
Channel Control (CC) #1
Channel Control (CC) #2
Datagram Exchange (DX)
IP header exchange
PEDRIVER implementation of NISCA
Physical Interconnect (PI) #1
Physical Interconnect (PI) #2
Port-to-Port Communication (PPC) #1
Port-to-Port Communication (PPC) #2
Port-to-Port Driver (PPD) #1
Port-to-Port Driver (PPD) #2
System Application (SYSAP) #1
System Application (SYSAP) #2
System Communications Services (SCS) #1
System Communications Services (SCS) #2
Transport (TR) #1
Transport (TR) #2
Proxy logins
controlling
records
Q
QDSKINTERVAL system parameter
QDSKVOTES system parameter #1
QDSKVOTES system parameter #2
QMAN$MASTER.DAT file #1
QMAN$MASTER.DAT file #2
QMAN$MASTER.DAT file #3
authorization elements
Queue managers
availability of
clusterwide
Queues
common command procedure
controlling
database files
creating
default location
setting up in SYSTARTUP_COMMON.COM procedure
Quorum
adding voting members
algorithm
calculating cluster votes
changing expected votes
definition
DISK_QUORUM system parameter
enabling a quorum disk watcher
EXPECTED_VOTES system parameter #1
EXPECTED_VOTES system parameter #2
QUORUM.DAT file
reasons for loss
removing voting members
restoring after unexpected computer failure
system parameters
VOTES system parameter
QUORUM.DAT file
Quorum disk
adding
adjusting EXPECTED_VOTES
disabling #1
disabling #2
enabling
mounting
QDKSVOTES system parameter
QUORUM.DAT file
restricted from shadow sets
watcher
enabling
mounting the quorum disk
system parameters
Quotas
process #1
process #2
R
RAID (redundant arrays of independent disks)
device naming problem
RBMS (Remote Bridge Management Software)
monitoring LAN traffic
REBOOT_CHECK option
RECNXINTERVAL system parameter
REMOVE_NODE option
Resource sharing
components that manage
making DECnet databases available clusterwide
printers
processing
Retransmissions
analyzing errors
caused by HELLO datagram congestion
caused by lost ACKs
caused by lost messages
problems
under congestion conditions
REXMT flag
RIGHTSLIST.DAT files
authorization elements
merging
security mechanism
RMS
use of distributed lock manager
S
SAS
support for compliant hardware
SAS interconnect
SAS (Serial Attached SCSI)
cluster-accessible disks
Satellite nodes
adding
altering local disk labels
booting #1
booting #2
booting #3
booting #4
booting #5
controlling
conversational bootstrap operations
DECnet MOP downline load service
LAN MOP downline load service
LANCP as booting mechanism
troubleshooting #1
troubleshooting #2
downline loading
functions
LAN hardware addresses
modifying
obtaining
local disk used for paging and swapping
maintaining network configuration data #1
maintaining network configuration data #2
preparing for
rebooting
removing
restoring network configuration data
system files created by CLUSTER_CONFIG.COM procedure
updating network data in NETNODE_REMOTE.DAT
SATELLITE_PAGE.COM command procedure
SAVE_FEEDBACK option
SCA Control Program (SCACP)
SCA (System Communications Architecture)
NISCA transport protocol #1
NISCA transport protocol #2
NISCA transport protocol #3
protocol levels #1
protocol levels #2
protocol levels #3
SCACP
See SCA Control Program
Scribe programs
capturing traffic data
SCS (System Communications Services)
connections
definition
DX header for protocol
for interprocessor communication
part of the SCA architecture #1
part of the SCA architecture #2
system parameters
SCSMAXDG
SCSMAXMSG
SCSRESPCNT
SCSI (Small Computer Systems Interface)
cluster-accessible disks
clusterwide reboot requirements
configurations
Two-node Integrity server shared SCSI clusters
device names
reboot requirements
disks #1
disks #2
support for compliant hardware
SCSLOA.EXE image
SCSNODE system parameter
SCSRESPCNT system parameter
SCSSYSTEMID system parameter
SDI (standard disk interface) #1
SDI (standard disk interface) #2
Search lists
Security management #1
Security management #2
controlling conversational bootstrap operations
membership integrity
network
security-relevant files
Sequence numbers
for datagram flags
Servers
actions during booting
boot
configuration memory and LAN adapters
disk
enabling circuit service for MOP
MOP
MOP and disk
MSCP
tape
TMSCP #1
TMSCP #2
used for downline load
SET AUDIT command
SET LOGINS command
SET PREFERRED_PATH command
SET TIME command
setting time across a cluster
SET VOLUME/REBUILD command
Shadow sets
accessed through MSCP server
definition
distributing
maximum number
See also Volume shadowing
virtual unit
SHOW CLUSTER command
Show Cluster utility (SHOW CLUSTER) #1
Show Cluster utility (SHOW CLUSTER) #2
CL_QUORUM command
CL_VOTES command
EXPECTED_VOTES command
SHOW DEVICE commands
SHUTDOWN command
shutting down a node
shutting down a node or subset of nodes
shutting down the cluster #1
shutting down the cluster #2
Shutting down a node #1
Shutting down a node #2
Shutting down TCP/IP
Shutting down the cluster #1
Shutting down the cluster #2
SMCI
Standalone computers
converting to cluster computer
START/QUEUE/MANAGER command
/NEW_VERSION qualifier
/ON qualifier #1
/ON qualifier #2
Starter programs
capturing retransmitted packets
Startup command procedures
coordinating
site-specific
template files
STARTUP_P1 system parameter
does not start all processes #1
does not start all processes #2
minimum startup
State transitions #1
State transitions #2
Status
returned by SYS$LAVC_START_BUS subroutine
STI (standard tape interface)
StorageWorks RAID Array 210 Subsystem
naming devices
StorageWorks RAID Array 230 Subsystem
naming devices
Stripe sets
shadowed
Swap files
created by CLUSTER_CONFIG.COM procedure
Swap files (SWAPFILE.SYS)
created by CLUSTER_CONFIG.COM procedure
SWAPFILE.SYS
SYLOGICALS.COM startup file
cloning system disks
clusterwide logical names
SYS$COMMON:[SYSMGR] directory
template files
SYS$DEVICES.DAT text file
SYS$LAVC_DEFINE_NET_COMPONENT subroutine
SYS$LAVC_DEFINE_NET_PATH subroutine
SYS$LAVC_DISABLE_ANALYSIS subroutine
SYS$LAVC_ENABLE_ANALYSIS subroutine
SYS$LAVC_START_BUS.MAR subroutine
SYS$LAVC_STOP_BUS.MAR subroutine
SYS$LIBRARY system directory
SYS$MANAGER:SYCONFIG.COM command procedure
SYS$MANAGER:SYLOGICALS.COM command procedure
SYS$MANAGER:SYPAGSWPFILES.COM command procedure
SYS$MANAGER:SYSECURITY.COM command procedure
SYS$MANAGER:SYSTARTUP_VMS.COM command procedure
SYS$MANAGER system directory
SYS$QUEUE_MANAGER.QMAN$JOURNAL file
SYS$QUEUE_MANAGER.QMAN$QUEUES file
SYS$SPECIFIC directory
SYS$SYSROOT logical name
SYS$SYSTEM:STARTUP.COM command procedure
SYS$SYSTEM system directory
SYSALF.DAT file
authorization elements
SYSAP protocol
definition #1
definition #2
use of SCS
SYSAPs
SYSBOOT
SET/CLASS command
SYSBOOT.EXE image
renaming before rebooting satellite
SYSMAN (System Management utility)
See System Management utility
SYSMAN utility
/CLUSTER_SHUTDOWN qualifier
SHUTDOWN NODE command
SYSTARTUP.COM procedures
setting up
SYSTARTUP_COM startup file
clusterwide logical names
System Dump Analyzer utility (SDA)
monitoring PEDRIVER
System management
AUTOGEN command procedure
operating environments
products
SYSMAN utility
System Dump Analyzer
tools for daily operations #1
tools for daily operations #2
System Management utility (SYSMAN)
enabling cluster alias operations
modifying cluster group data
System parameters
ACP_REBLDSYSD #1
ACP_REBLDSYSD #2
adjusting for cluster growth
adjusting LRPSIZE parameter
adjusting NISCS_MAX_PKTSZ parameter
adjusting NISCS_UDP_PKTSZ parameter
caution to prevent data corruption #1
caution to prevent data corruption #2
caution to prevent data corruption #3
CHECK_CLUSTER
cluster parameters
CLUSTER_CREDITS #1
CLUSTER_CREDITS #2
CWCREPRC_ENABLE
DISK_QUORUM
DR_UNIT_BASE
EXPECTED_VOTES #1
EXPECTED_VOTES #2
EXPECTED_VOTES #3
EXPECTED_VOTES #4
LAN_FLAGS
LOCKDIRWT #1
LOCKDIRWT #2
LOCKRMWT
MPDEV_AFB_INTVL
MPDEV_D1 #1
MPDEV_D1 #2
MPDEV_ENABLE
MPDEV_LCRETRIES
MPDEV_POLLER
MPDEV_REMOTE
MSCP_BUFFER
MSCP_CMD_TMO
MSCP_CREDITS
MSCP_LOAD #1
MSCP_LOAD #2
MSCP_SERVE_ALL #1
MSCP_SERVE_ALL #2
NISCS_CONV_BOOT #1
NISCS_CONV_BOOT #2
NISCS_CONV_BOOT #3
NISCS_LAN_OVRHD
NISCS_LOAD_PEA0 #1
NISCS_LOAD_PEA0 #2
NISCS_MAX_PKTSZ
NISCS_PORT_SERV
NISCS_UDP_PKTSZ
PASTDGBUF
QDSKINTERVAL
QDSKVOTES
quorum
RECNXINTERVAL
retaining with feedback option
SCSMAXDG
SCSMAXMSG
SCSRESPCNT
setting parameters in MODPARAMS.DAT file
STARTUP_P1 set to MIN
TAPE_ALLOCLASS
TIMVCFAIL
TMSCP_LOAD #1
TMSCP_LOAD #2
TMSCP_SERVE_ALL
updating in MODPARAMS.DAT and AGEN$ files
VAXCLUSTER
VOTES #1
VOTES #2
System time
setting clusterwide
SYSUAF.DAT files
authorization elements
creating common version
determining process limits and quotas
merging
printing listing of
setting up
SYSUAFALT.DAT files
authorization elements