The $LOGTYPDEF macro defines the following symbolic names for the fault characteristic codes:

Symbol	Description
LOGTYP$M_ARGS	Log system service arguments.
LOGTYP$M_FILE	Write log information to a file.

If you specify the flags argument as 0, the service defaults to logging to a file and logging arguments.

If you specify LOGTYP$M_ARGS but lack privilege, service arguments are not logged.

Description

The $SET_PROCESS_PROPERTIESW system service sets a simple value associated with a process.

Generally, this service is used for changing process properties that have a maximum of a single quadword. You can change only one property at a time per call to this service.

Required Access or Privileges

To affect system service logging for another process, the calling process might need one of the following privileges:

• GROUP privilege to affect a process in the same group, unless the target process has the same UIC as the calling process.
• WORLD privilege to affect any process in the system.

To request logging the arguments passed to a system service, a process needs SETPRV, CMKRNL, or CMEXEC privilege.

Required Quota

When system service logging is enabled, the log buffers are charged against the process's paging file quota (PGFLQUOTA).

Related Services

$GETJPI

Condition Values Returned

SS$_NORMAL	The service completed successfully.
SS$_ACCVIO	Access violation.
SS$_WRONGSTATE	An attempt was made to modify system service logging characteristics of a process when logging is disabled systemwide.
SS$_NONEXPR	The specified process does not exist, or an invalid process identification was specified.
SS$_NOPRIV	The process does not have the privilege to affect the other process.
SS$_IVLOGNAM	The process name string has a length of 0 or has more than 15 characters.

Controls the association between a calling process and resource domains.

Format

SYS$SET_RESOURCE_DOMAIN func ,rsdm_id ,domain_number ,[nullarg] ,[access] ,[acmode]

C Prototype

int sys$set_resource_domain (unsigned int func, unsigned int *rsdm_id, unsigned int domain_number, unsigned int nullarg, unsigned int access, unsigned int acmode);

Arguments

func

OpenVMS usage:	function_code
type:	longword (unsigned)
access:	read only
mechanism:	by value

Function code specifying the action that $SET_RESOURCE_DOMAIN is to perform. The func argument is a longword containing this function code. See the Function Codes section for a description of $SET_RESOURCE_DOMAIN function codes.

rsdm_id

OpenVMS usage:	longword
type:	longword (unsigned)
access:	write only to join, read only to leave
mechanism:	by reference

Resource domain identification. The rsdm_id argument is the address of a longword specifying the association of the calling process with the resource domain.

The RSDM$_JOIN_DOMAIN function returns a resource domain identification. The RSDM$_LEAVE function requires the rsdm_id argument as input to specify which resource domain association the process is leaving.

The resource domain identification can be used as input to the $ENQ and $ENQW system services.

domain_number

OpenVMS usage:	longword
type:	longword (unsigned)
access:	read only
mechanism:	by value

Domain number that identifies the resource domain. The domain_number argument is a longword value containing the resource domain number.

The domain_number argument is required for the RSDM$_JOIN_DOMAIN function but ignored for the RSDM$_LEAVE function.

nullarg

OpenVMS usage:	null_arg
type:	longword (unsigned)
access:	read only
mechanism:	by value

Placeholder reserved to HP. You must specify 0.

access

OpenVMS usage:	mask_longword
type:	longword (unsigned)
access:	read only
mechanism:	by value

Types of access desired when using the lock management services within the resource domain. The access argument is a longword bit mask specifying the access types required; these can include read, write, and lock.

The following table lists the symbols that the $RSDMDEF macro defines, their descriptions, and the lock management system services that might require each type of access:

Symbol	Access Description	System Service
RSDM$M_READ	Read lock value blocks	$DEQ, $ENQ, $ENQW, $GETLKI, $GETLKIW
RSDM$M_WRITE	Write lock value blocks	$DEQ, $ENQ, $ENQW,
RSDM$M_LOCK	Take locks	$ENQ, $ENQW

The service grants the desired access, provided your process has the necessary access rights to the resource domain. If you do not specify the access argument or if you specify 0, $SET_RESOURCE_DOMAIN attempts to access the domain in the following order:

1. Read, write, lock
2. Read, lock
3. Write, lock
4. Lock

The access attempt terminates with the first success.

The access argument defaults to 0. It is ignored for the RSDM$_LEAVE function.

acmode

OpenVMS usage:	access_mode
type:	longword (unsigned)
access:	read only
mechanism:	by value

Access mode requested for the association to the resource domain. The most privileged access mode granted is the access mode of the caller. Locks cannot be taken from access modes less privileged than the access mode of the association.

The acmode argument is a longword containing the access mode. The $PSLDEF macro defines the following symbols for the access modes:

Symbolic Name	Access Mode	Privilege Rank
PSL$C_KERNEL	Kernel	High
PSL$C_EXEC	Executive	--
PSL$C_SUPER	Supervisor	--
PSL$C_USER	User	Low

The acmode argument is optional for the RSDM$_JOIN_DOMAIN function. If you do not specify the acmode argument, the access mode is set to the access mode of the calling process. The acmode argument is ignored for the RSDM$_LEAVE function.

Function Codes

RSDM$_JOIN_DOMAIN

A process has the option of forming multiple associations with one or more resource domains. Each association can have different access rights to the resource domain, such as to read lock value blocks or to write lock value blocks. This request sets up a new association with a resource domain.

$SET_RESOURCE_DOMAIN verifies the desired access against the security profile of the resource domain. If the desired access is allowed, a new association to the resource domain is created, and a resource domain identification for the association is returned.

This function code returns the following condition values:

SS$_NORMAL
SS$_BADPARAM
SS$_EXQUOTA
SS$_INSFMEM
SS$_NOOBJSRV
SS$_NOPRIV

RSDM$_LEAVE

This operation requests that a process end an association with a resource domain.

A process must leave a resource domain association in the same mode as, or in a more privileged mode than, the mode in which it joined the resource domain.

Before a process can end its association with a resource domain, it must release all locks taken using that association.

This function code returns the following condition values:

SS$_NORMAL
SS$_BADPARAM
SS$_IVMODE
SS$_RSDM_ACTIVE
SS$_RSDMNOTFOU

Description

The Set Resource Domain system service enables a process to use the lock management system services $DEQ, $ENQ, $ENQW, $GETLKI, and $GETLKIW.

The lock management services enable processes with the appropriate access rights to take and release locks on resource names and to perform other functions related to lock management. Applications use resource names to represent resources to which they want to synchronize access. A resource domain is a namespace for resource names. A process must join a resource domain to take and release locks and to read and write value blocks associated with resources in that resource domain.

When a process requests to join a resource domain, $SET_RESOURCE_DOMAIN performs an access check. After $SET_RESOURCE_DOMAIN verifies the desired access to the resource domain, the service creates an association between the resource domain and the calling process. The association is represented by a resource domain identification. A process can request different types of access to the same resource domain; the type of access is a characteristic of the association with the resource domain.

Each time a process joins a resource domain, a new association is created.

Processes use their resource domain identifications when using $ENQ or $ENQW to request a new lock.

The service can grant the following three types of access to resource domains:

• The right to read lock value blocks
• The right to write lock value blocks
• The right to take and release locks

Required Access or Privileges

None

Required Quota

$SET_RESOURCE_DOMAIN uses system dynamic memory, which uses BYTLM quota, for the creation of the resource domain data structures.

Related Services

$DEQ, $ENQ, $ENQW, $GETLKI, $GETLKIW

Condition Values Returned

SS$_NORMAL	The service completed successfully.
SS$_BADPARAM	The func, the domain_number, or the rsdm_id argument was specified incorrectly.
SS$_EXQUOTA	The caller has insufficient BYTLM quota.
SS$_INSFMEM	There is insufficient memory to join the resource domain.
SS$_IVMODE	An attempt was made to leave an association created by a more privileged access mode.
SS$_NOOBJSRV	The audit server process, which maintains the security profile for resource domains, is not running. The process access rights to the domain cannot be determined, so access is denied.
SS$_NOPRIV	Access to the resource domain was denied.
SS$_RSDM_ACTIVE	Unable to leave the resource domain because there are locks still associated with this resource domain.
SS$_RSDMNOTFOU	The resource domain was not found.

On Alpha and Integrity server systems, sets the return values or condition codes in the Mechanism Array, independent of the architecture.

Format

SYS$SET_RETURN_VALUE mechanism_arg, return_type, return_value

C Prototype

int sys$set_return_value (void *mechanism_arg, unsigned int *return_type, void *return_value);

Arguments

mechanism_arg

OpenVMS usage:	mechanism vector address
type:	quadword (unsigned)
access:	read only
mechanism:	by value

The address of the location of the mechanism vector. If the mechanism_arg argument is 0, the mechanism vector for the currently active signal is used.

If the address of the return_type argument is 0, the return_value argument is fetched by value and is treated as return-type PSIG$K_FR_U32. This combination of arguments can be used to set a condition code, such as SS$_ACCVIO, as a return value.

return_type

OpenVMS usage:	integer
type:	longword (unsigned)
access:	read only
mechanism:	by reference

The address of the location of a longword that contains one of the function return signature codes.

If the address of the return_type argument is 0, the return_value argument is fetched by value and is treated as return-type PSIG$K_FR_U32. This combination of arguments can be used to set a condition code, such as SS$_ACCVIO, as a return value.

return_value

OpenVMS usage:	buffer
type:	scalar
access:	read only
mechanism:	by reference

The address of the location that contains a value of the appropriate type. The referenced value is read as a longword, quadword, or octaword, depending on the return_type.

If the address of the return_type argument is 0, the return_value argument is fetched by value and is treated as return-type PSIG$K_FR_U32. This combination of arguments can be used to set a condition code, such as SS$_ACCVIO, as a return value.

Description

The Set Return Value service allows the caller to specify return values and condition codes in the Mechanism Array, independent of the architecture.

Required Access or Privileges

None

Required Quota

None

Related Services

None

Condition Values Returned

status	Success or failure. The given return value is placed in the appropriate fields of the specified mechanism vector, according to the return type.
SS$_NORMAL	The service completed successfully.
SS$_BADPARAM
SS$_NOSIGNAL	No signal is currently active for an exception condition.

Modifies the security characteristics of a protected object.

Format

SYS$SET_SECURITY [clsnam] ,[objnam] ,[objhan] ,[flags] ,[itmlst] ,[contxt] ,[acmode]

C Prototype

int sys$set_security (void *clsnam, void *objnam, unsigned int *objhan, unsigned int flags, void *itmlst, unsigned int *contxt, unsigned int *acmode);

Arguments

clsnam

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor

Name of the object class. The clsnam argument is the address of a descriptor pointing to a string that contains the name of the object class.

The following is a list of the protected object class names:

CAPABILITY
COMMON_EVENT_CLUSTER
DEVICE
FILE
GLXGRP_GLOBAL_SECTION
GLXSYS_GLOBAL_SECTION
GROUP_GLOBAL_SECTION
ICC_ASSOCIATION
LOGICAL_NAME_TABLE
QUEUE
RESOURCE_DOMAIN
SECURITY_CLASS
SYSTEM_GLOBAL_SECTION
VOLUME

objnam

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor

Name of the protected object whose associated security profile is going to be retrieved. The objnam argument is the address of a descriptor pointing to a string containing the name of the protected object.

The format of an object name is class specific. The following table lists object names and describes their formats:

Object Class	Object Name Format
CAPABILITY	A character string. Currently, the only capability object is VECTOR.
COMMON_EVENT_CLUSTER	Name of the event flag cluster, as defined in the Associate Common Event Flag Cluster ($ASCEFC) system service.
DEVICE	Standard device specification, described in the OpenVMS User's Manual.
FILE	Standard file specification, described in the OpenVMS User's Manual.
GROUP_GLOBAL_SECTION	Section name, as defined in the Create and Map Section ($CRMPSC) system service.
ICC_ASSOCIATION	ICC security object name node::association_name. The special node name, ICC$::, refers to entries in the clusterwide registry. For registry entries, the Access Access Type does not apply.
LOGICAL_NAME_TABLE	Table name, as defined in the Create Logical Name Table ($CRELNT) system service.
QUEUE	Standard queue name, as described in the Send to Job Controller ($SNDJBC) system service.
RESOURCE_DOMAIN	An identifier or octal string enclosed in brackets.
SECURITY_CLASS	Any class name shown in the Object Class column of this table, or a class name followed by a period (.) and the template name. Use the DCL command SHOW SECURITY to display possible template names.
SYSTEM_GLOBAL_SECTION	Section name, as defined in the Create and Map Section ($CRMPSC) system service.
VOLUME	Volume name or name of the device on which the volume is mounted.

objhan

OpenVMS usage:	object_handle
type:	longword (unsigned)
access:	read only
mechanism:	by reference

Data structure identifying the object to address. The objhan argument is an address of a longword containing the object handle. You can use the objhan argument as an alternative to the objnam argument; for example, a channel number clearly specifies the file open on the channel and can serve as an object handle.

The following table shows the format of the object classes:

Object Class	Object Handle Format
COMMON_EVENT_CLUSTER	Event flag number
DEVICE	Channel number
FILE	Channel number
RESOURCE_DOMAIN	Resource domain identifier
VOLUME	Channel number

flags

OpenVMS usage:	flags
type:	mask_longword
access:	read only
mechanism:	by value

Mask specifying processing options. The flags argument is a longword bit vector wherein a bit, when set, specifies the corresponding option. The flags argument requires the contxt argument.

The following table describes each flag:

Symbolic Name	Description
OSS$M_LOCAL	Do not update the master profile for the specified object. This flag allows you to call $SET_SECURITY several times to modify a local copy of a profile; once the modifications are satisfactory, you can clear the OSS$M_LOCAL flag, set the OSS$M_RELCTX flag, and have $SET_SECURITY update the master profile. The flag applies only to calls made with the contxt argument.
OSS$M_RELCTX	Release the context structure at the completion of this request.

The $OSSDEF macro defines symbolic names for the flag bits. You construct the flags argument by specifying the symbolic names of each desired option.

itmlst

OpenVMS usage:	item_list_3
type:	longword (unsigned)
access:	read only
mechanism:	by reference

Item list specifying which information about the process or processes is to be modified. The itmlst argument is the address of a list of item descriptors, each of which describes an item of information. The list of item descriptors is terminated by a longword of 0.

With the item list, the user modifies the protected object's characteristics. The user defines which security characteristics to modify. If this argument is not present, only the flags argument is processed. Without the itmlst argument, you can only manipulate the security profile locks or release contxt resources.

The following data structure depicts the format of a single item descriptor:

The following table defines the item descriptor fields:

Descriptor Field	Definition
Buffer length	A word containing an integer specifying the length (in bytes) of the buffer from which $SET_SECURITY is to read the information. The length of the buffer needed depends on the item code specified in the item code field of the item descriptor. If the value of buffer length is too small, $SET_SECURITY truncates the data.
Item code	A word containing a symbolic code specifying the item of information that $SET_SECURITY is to modify. The $OSSDEF macro defines these codes. A description of each item code is given in the Item Codes section.
Buffer address	A longword containing the address of the buffer from which $SET_SECURITY is to read the information.
Return length address	Not used.

contxt