A
- Accounts
- creating
after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- ACPI configuration, Checking the ACPI Configuration for Booting OpenVMS in an nPartition
- Advanced
Encryption Standard (AES), Glossary
- Advanced Server for OpenVMS
- defined, Glossary
- AGEN$INCLUDE
files
- returning to system disk, AGEN$INCLUDE Files
- AGEN$PARAMS.REPORT file
- examining, Running AUTOGEN to Tune the System
- Aliases
- with hard links enabled, Installing OpenVMS Using Option 1 of the Operating System Menu
- Allocation
class (ALLOCLASS parameter)
- for shadow sets, Set System Parameters for Volume Shadowing (Optional)
- setting during installation, Required OpenVMS Cluster Information, Joining an OpenVMS Cluster
- supplying during OpenVMS Cluster installation, Prompts for OpenVMS Cluster Configurations
- Alpha
commands
- compared with Integrity server commands, Alpha and Equivalent Integrity servers System Boot Commands
- Alpha computers
- boot
behavior
- configuring, Configuring Boot Behavior for Alpha Systems - Writing a New Boot Block, Setting and Showing Boot Devices
- boot device
- setting, Setting and Showing Boot Devices
- showing, Setting and Showing Boot Devices
- boot flag parameters
- setting, Setting Boot Flag Parameters
- booting
- automatic, Setting the System for Automatic Booting
- canceling
boot device, Setting and Showing Boot Devices
- conversational, Performing a Conversational (Interactive) Boot
- emergency, Booting in an Emergency
- failure, If the System Does Not Boot
- from a
different root, Booting from a Different Root Directory
- manually, Booting Manually from the System Disk
- with minimum startup, Booting with Minimum Startup
- with PMAD TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC
TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- firmware, Firmware on Alpha Systems
- halting, Halting the System
- shutting
down, Shutting Down the System
- troubleshooting procedures, Detecting and Responding to System Problems
- ANALYZE/CRASH
command, Emergency Shutdown with Crash Commands
- ANALYZE/DISK_STRUCTURE command
- error message, Examining the System Disk
- using before an upgrade, Examining the System Disk
- APB.EXE
- and Writeboot utility, Writing a New Boot Block
- Architectures
- in
OpenVMS Cluster, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- Archived files
- deleting, Saving Archived Files
- saving, Saving Archived Files
- Authorization
- files, Authorization Files
- network proxy, Creating Network Proxy Authorization Files
- returning to system disk, Returning Authorization and AGEN$INCLUDE Files to the System Disk
- AUTOGEN, Running AUTOGEN to Tune the System
- reboot after, Rebooting After AUTOGEN
- running after an installation or upgrade, Running AUTOGEN to Tune the System
- running
at end of installation, Running AUTOGEN
- running
at end of upgrade, What to Do After Shutdown
- tuning operating system, Running AUTOGEN to Tune the System
- Availability Manager
- configuring, Configuring the Availability Manager Base Software (Optional)
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- AVIO
- defined, Glossary
B
- backing store
- defined, Glossary
- Backing
up the system disk, Backing Up and Restoring the System Disk - Using the Alternate System Disk
- after customizing, Backing Up the Customized System Disk and Initiating Systematic Backups
- after installation or upgrade, Backing Up Your System Disk
- before upgrade, Backing Up the System Disk
- from OpenVMS main menu, Using the Operating System Menu
- in a shadow set, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- without booting the OpenVMS CD or DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Backspace
key, Using the Delete or Backspace Key with Integrity server Utilities
- BACKUP command, Reasons for Backing Up the System Disk
- caution, OpenVMS Cluster Caution
- BAP system
parameters
- tuning, Tuning BAP System Parameters (Alpha Upgrade Only)
- Base Operating
Environment
- (see BOE)
- Baseboard Management Controller
- (see BMC (Baseboard Management Controller))
- Batch queue
- creating, Setting Up the Queue Manager and Default Queues
- BIB (boot-is-blocked
state), Booting OpenVMS Integrity servers on an nPartition, Orderly Shutdown, If the System Does Not Boot
- defined, Glossary
- BMC (Baseboard Management Controller)
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity servers
- system event log (SEL), Booting Operations
- BOE
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- Boot
- defined, Glossary
- Boot block, writing, Writing a New Boot Block, Writing a New Boot Block
- Boot command
- Alpha and Integrity server equivalents, Alpha and Equivalent Integrity servers System Boot Commands
- qualifiers
for XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
- Boot device list, General Notes About Using EFI
- Boot device
paths
- configuring on FC, Configuring and Booting FC Boot Device
- Boot flags, Setting and Showing Boot Devices, Adding a Boot Option and Setting Boot Flags
- Boot options
- boot devices, Setting and Showing Boot Devices, Setting Boot Options for Your System Disk
- changing
EFI boot timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- displaying, Setting the System for Automatic Booting, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- during
upgrade, Upgrade Creates and Validates Boot Options (Integrity servers only)
- setting, Configuring Boot Behavior for Alpha Systems - Writing a New Boot Block, Setting Boot Options for Your System Disk
- setting
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting during upgrade, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only)
- Boot
server
- configuration for InfoServer, Setting Up the BOOTP Boot Server and TFTP Server (OpenVMS Integrity servers Only)
- defined, Glossary
- Booting
- automatic, Setting the System for Automatic Booting, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- canceling boot device, Setting and Showing Boot Devices
- cell-based servers, Overview of Booting on a Cell-Based Server
- conversational, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- emergency, Booting in an Emergency, Emergency Booting
- with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the user authorization
file, Booting Without the User Authorization File, Booting Without a User Authorization File
- failure, If the System Does Not Boot, If the System Does Not Boot
- from a
different root, Booting from a Different Root Directory, Booting from a Different Root Directory
- from Fibre
Channel storage devices, Setting Up and Booting Fibre Channel Storage Devices - Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
- from HP SIM, Booting Using HP SIM Provisioning, Booting Using HP SIM Provisioning, Booting an Image of the OpenVMS Integrity servers OE DVD Using HP SIM Provisioning
- from InfoServer, Booting from the InfoServer, Booting Over the Network Using the InfoServer Utility, Booting from the InfoServer, Booting Over the Network Using the InfoServer Utility, Booting from the InfoServer, Booting the OpenVMS Integrity servers OE DVD from the InfoServer, Booting OpenVMS Integrity servers from the InfoServer
- from local drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive, Booting the OpenVMS Integrity servers OE DVD from the Local Drive
- from vMedia, Booting Using vMedia, Booting Using vMedia, Booting an Image of the OpenVMS Integrity servers OE DVD Using vMedia
- manually, Booting Manually from the System Disk, Booting Manually from the Local System Disk
- OpenVMS Alpha operating system CD, Booting the OpenVMS Alpha Operating System CD
- OpenVMS Integrity servers OE DVD, Booting the OpenVMS Integrity servers OE DVD from the Local Drive
- operating system CD/DVD, Booting the OpenVMS Alpha CD, Booting the OpenVMS Integrity servers OE DVD
- for upgrade, Booting the OpenVMS Integrity servers OE DVD
- problems, Booting with Default System Parameters, Booting with Default System Parameters
- satellite, Adding the Network Boot Option to the EFI Boot Manager
- setting boot device, Setting and Showing Boot Devices
- setting boot flag parameters, Setting Boot Flag Parameters, Adding a Boot Option and Setting Boot Flags
- showing boot device, Setting and Showing Boot Devices
- with alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
- with PMAD
TURBOchannel, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
- Bootstrap
- defined, Glossary
- Bugcheck, Detecting and Responding to System Problems, Detecting and Responding to System Problems
C
- CDSA
- defined, Glossary
- initializing, Initializing CDSA (Optional)
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- Cell
- defined, Glossary
- Cell boot phase, Booting the nPartition Hardware
- Cell-based
servers, Configuration and Management Utilities on Cell-Based Servers
- (see also nPartition)
- booting, Overview of Booting on a Cell-Based Server
- defined, Glossary
- EFI, General Notes About Using EFI
- terminology, Cell-Based Server Terminology
- utilities, Configuration and Management Utilities on Cell-Based Servers
- Checklist
- installation, Installation Tasks
- postinstallation
and postupgrade, Postinstallation and Postupgrade Tasks
- preinstallation for OpenVMS Cluster, Preinstallation Tasks
- preupgrade, Preupgrade Tasks
- preupgrade for OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
- upgrade, Upgrade Tasks
- CI-only OpenVMS
Cluster
- defined, Glossary
- Cluster
- (see OpenVMS Cluster)
- Cluster size
(disk volume), Changing the Disk Volume Cluster Size
- Command
procedures
- checking after upgrade, Examining Your Command Procedures (Upgrades Only)
- site-specific, Examining Your Command Procedures (Upgrades Only)
- Computer interconnect
(CI)
- defined, Glossary
- Concurrent
upgrades
- defined, Glossary
- description, Concurrent Upgrade
- preparing system for, Preparing Your System for a Concurrent Upgrade
- tasks
after shutdown, What to Do After Shutdown
- Configuration
options
- during upgrade, Selecting Reinstallation and Reconfiguration Options
- Console (Integrity servers)
- configuring, Selecting Your OpenVMS Console for the Integrity servers System
- delete or backspace key, Using the Delete or Backspace Key with Integrity server Utilities
- interface, Configuration and Management Utilities for HP Integrity servers
- MP, Selecting Your OpenVMS Console for the Integrity servers System
- MP interface, Selecting Your OpenVMS Console for the Integrity servers System
- options, Overview of Utilities and Console Options
- system serial port, Selecting Your OpenVMS Console for the Integrity servers System
- Console firmware, Firmware on Alpha Systems, Firmware on Integrity server Systems
- CONTINUE
command, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- Core
- defined, Glossary
- Core I/O
- defined, Glossary
- Crash commands, Emergency Shutdown with Crash Commands
- Customizing the system, Customizing the System (New Installations, Some Upgrades) - Installing and Configuring Third-Party Networking Software
D
- Data Center
Operating Environment
- (see DCOE)
- DCL option (from OpenVMS main menu), Using the Execute DCL Option (8)
- DCOE (Data
Center Operating Environment)
- defined, Glossary
- Debug devices
- configuring, Overview of Using EFI
- DEC
3000 Alpha computers
- booting
- over the
network, Booting over the Network with an Alternate TURBOchannel Adapter
- with
alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with
PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- DECamds
- check for valid versions for system upgrade, Software That Must Be Manually Removed
- DECevent
- reinstall after upgrade, Reinstall DECevent Software (Alpha Upgrades only; optional)
- Decipher, Glossary
- DECnet
- declaring
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- node address, Required OpenVMS Cluster Information
- providing
during installation, Prompts for OpenVMS Cluster Configurations
- node name, Required OpenVMS Cluster Information
- possible values, Prompts for OpenVMS Cluster Configurations
- providing during installation, Prompts for OpenVMS Cluster Configurations
- DECnet Phase IV
- configuring, Configuring DECnet
- defined, Glossary
- ignoring during startup, Configuring DECnet
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- registering license after installation, Registering Your Licenses
- running with DECwindows, Configuring DECnet
- upgrading, Upgrading Windowing, Networking, and Related Products
- DECnet-Plus
- configuring, Configuring DECnet
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- upgrading, Upgrading Windowing, Networking, and Related Products
- DECnet/OSI
- (see DECnet-Plus)
- DECram
- checking for valid versions for system upgrade, Software That Must Be Manually Removed
- DCL command DECRAM, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- in system
upgrade, Remove Older Versions of DECram for OpenVMS (Alpha Only)
- DECRYPT
command, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- Decryption
- defined, Glossary
- DECwindows Motif
- client files, Upgrading Windowing, Networking, and Related Products
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- Delete key (Integrity server utilities), Using the Delete or Backspace Key with Integrity server Utilities
- Device name
- conventions, Device-Naming Conventions
- defined, Glossary
- Diagnostic partition, Alternative Ways to Initialize the System Disk
- defined, Glossary
- removing, Removing the Diagnostic Partition File (Integrity servers only)
- Disk server
- defined, Glossary
- Disk
space
- amount needed for upgrade, Checking the Size of the System Disk
- amount needed to decompress system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- DSSI (Distributed Storage Systems
Interconnect)
- defined, Glossary
- DSSI-only
OpenVMS Cluster
- defined, Glossary
- Dump
file
- checking size, System File Sizes
- modifying size, Running AUTOGEN to Tune the System
- Dump Off the System Disk
(DOSD)
- configuring, Overview of Using EFI
- DWMOTIF_SUPPORT, Upgrading Windowing, Networking, and Related Products
E
- EFI (Extensible Firmware Interface), Integrity server Tools
- adding boot options, Setting Boot Options for Your System Disk
- boot path settings
- storing and restoring, Saving and Restoring EFI Settings
- changing boot option timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity servers
- displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- on nPartition, General Notes About Using EFI
- using, Overview of Using EFI - General Notes About Using EFI
- EFI Boot Manager, Overview of Utilities and Console Options
- (see also OpenVMS Integrity servers Boot Manager (BOOT_OPTIONS.COM)
utility)
- adding boot options to
- manually, Using EFI to Set Automatic Booting of Your System Disk
- using OpenVMS Integrity servers Boot Manager utility, Setting Boot Options for Your System Disk
- setting
boot behavior, Configuring and Managing OpenVMS Booting on Integrity servers
- setting timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- EFI Utilities for OpenVMS (Integrity
servers)
- documentation, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- entering commands, Differences Between OpenVMS Integrity servers and Alpha Installations, General Notes About Using EFI
- vms_bcfg, Using EFI to Set Automatic Booting of Your System Disk
- vms_set
command, Alpha and Equivalent Integrity servers System Boot Commands
- vms_show command, Displaying EFI Boot Entries and Mapped OpenVMS Devices, Alpha and Equivalent Integrity servers System Boot Commands
- EFI$BCFG (see OpenVMS Integrity
servers Boot Manager (BOOT_OPTIONS.COM) utility)
- Emergency system startup, Booting in an Emergency, Emergency Booting
- with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
- Encipher, Glossary
- ENCRYPT command, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- Encryption
- defined, Glossary
- Encryption for OpenVMS, Glossary
- Enterprise Operating Environment
- (see EOE)
- EOE
- defined, Glossary
- Errors
- cluster hang during preupgrade shutdown, Preparing Your System for a Rolling Upgrade
- running
ANALYZE/DISK_STRUCTURE, Examining the System Disk
- troubleshooting
system problems, If the System Does Not Boot, If the System Does Not Boot
- Extensible Firmware Interface (see EFI (Extensible Firmware Interface))
F
- FEEDBACK.DAT
file, Ensuring You Have a Recent FEEDBACK.DAT File
- Fibre Channel
- configuring and booting, Setting Up and Booting Fibre Channel Storage Devices - Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
- configuring for booting, Overview of Using EFI, Setting Boot Options for Your System Disk, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- in cluster, Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
- configuring for dumping, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- displaying device information, Viewing the FC Configuration from the Console, Setting Up FC Disks for Booting and Dumping, Checking the Firmware Version
- firmware, Viewing the FC Configuration from the Console, Checking the Firmware Version, Obtaining the IPF Offline Diagnostics and Utilities
- newly installed disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- newly upgraded system disk, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only)
- SAN storage array graphic, Fibre Channel Host and SAN Storage Controller Configuration
- system
disk booting, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- system disk identification, Installing OpenVMS Using Option 1 of the Operating System Menu
- FIELD
account
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- Files
- restoring on the system disk, Using the Operating System Menu
- Firmware
- revision checking, Firmware on Alpha Systems, Checking Firmware Version
- updating, Firmware on Alpha Systems, Firmware on Integrity server Systems
- FOE
- defined, Glossary
- Foundation Operating
Environment
- (see FOE)
G
- Gigabit Ethernet
- cluster, Required OpenVMS Cluster Information
- LAN
devices, Booting from the InfoServer
- Global
Workload Manager (see gWLM (Global Workload Manager))
- Graphics
- console device, Selecting Your OpenVMS Console for the Integrity servers System, Selecting Your OpenVMS Console on rx2600 Integrity servers
- interface, DECwindows, Using the Display Layered Products Option (2), Responding to Prompts During Installation
- option
- multihead configuration, Configuring a Multihead System (Optional), Selecting Your OpenVMS Console for the Integrity servers System
- gWLM
(Global Workload Manager)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
H
- Halting the system, Halting the System, Halting the Integrity servers to Recover from Hangs and Crashes
- Hard links
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- Hardware
- components
- preinstallation, Hardware Components
- documentation
- Integrity servers, Getting to Know Your Integrity servers, Configuring OpenVMS Integrity servers Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
- problems, diagnosing, For Hardware Problems
- Integrity servers, If the System Does Not Boot
- HP Binary Checker
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- HP SIM (Systems Insight
Manager)
- defined, Glossary
- provisioning, About HP SIM and Provisioning
- requirements, Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- setting up for provisioning, Setting Up HP SIM and the Windows Server to Provision OpenVMS
- HP
SIM provisioning
- (see Provisioning)
- HRS (Human
Recognition Service Standard)
- defined, Glossary
- HSxdevice
- defined, Key Terms, Glossary
- specifying, Specifying the Default Boot Device on OpenVMS Alpha Systems
- HSxdrive
- defined, Glossary
- Hyper-Threading
- defined, Glossary
- enabling and disabling, Enabling or Disabling Hyper-Threading on Dual-Core Processors
- saving or restoring state of, Saving and Restoring EFI Settings
I
- iCAP (Instant
Capacity)
- and removal of the operating system from system disk, Removing the OpenVMS Operating System
- and system disk initialization, INITIALIZE Option
- configuring, Configure the Instant Capacity Software (Optional; Integrity servers only)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- iLO (Integrated
Lights Out), Integrity server Tools, Configuration and Management Utilities for HP Integrity servers
- InfoServer
- booting, Booting from the InfoServer, Booting from the InfoServer, Booting from the InfoServer, Booting OpenVMS Integrity servers from the InfoServer
- client configuration, Setting Up Your System as an InfoServer Client
- defined, Key Terms, Glossary
- for
provisioning
- setting up, Setting Up InfoServer Support
- LAN devices supported, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
- losing connection, Booting from the InfoServer, Booting OpenVMS Integrity servers from the InfoServer
- during installation, Booting from the InfoServer
- during upgrade, Booting from the InfoServer
- software application
- boot server configuration, Setting Up the BOOTP Boot Server and TFTP Server (OpenVMS Integrity servers Only)
- booting OpenVMS, Booting OpenVMS Integrity servers from the InfoServer
- configuration, Setting Up and Performing Network Booting - Troubleshooting InfoServer Boot Problems
- server configuration, Setting Up the InfoServer Server
- troubleshooting, Troubleshooting InfoServer Boot Problems
- INITIALIZE
- command, Setting the System for Automatic Booting
- option
- alternative use of, Alternative Ways to Initialize the System Disk
- on OpenVMS main menu, INITIALIZE Option, Installing OpenVMS Using Option 1 of the Operating System Menu
- Insight Power Management (see IPM (Insight
Power Management))
- Installable
products
- displaying, Using the Display Layered Products Option (2)
- Installation, Installing the OpenVMS Operating System - Postinstallation Tasks
- and AUTOGEN, Running AUTOGEN
- booting
- new system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Booting the New OpenVMS System Disk
- operating
system CD/DVD, Booting the OpenVMS Operating System Media - Booting Using vMedia
- checklist, Installation Tasks
- completing
the procedure, Installing OpenVMS Using Option 1 of the Operating System Menu
- component options, list of, Installing OpenVMS Using Option 1 of the Operating System Menu
- differences between OpenVMS Alpha and Integrity servers, Differences Between OpenVMS Integrity servers and Alpha Installations
- help
text, Installing OpenVMS Using Option 1 of the Operating System Menu
- HP SIM provisioning, Provisioning OpenVMS
- information needed for OpenVMS Cluster, Preparing to Install in an OpenVMS Cluster Environment - Beginning the Installation
- Integrity VM guest operating system, Installing the OpenVMS Guest Operating System, Installing the Guest Operating System
- layered
products, Installing OpenVMS Using Option 1 of the Operating System Menu
- after installation
or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- license
registration, Installing OpenVMS Using Option 1 of the Operating System Menu
- on target disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- OpenVMS Debugger clients, Installing OpenVMS Debugger Clients on a PC (Optional)
- PCSI, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- procedure, Installing OpenVMS Using Option 1 of the Operating System Menu - Installing OpenVMS Using Option 1 of the Operating System Menu
- prompts, Responding to Prompts During Installation
- rebooting system, Rebooting After AUTOGEN
- recording, Hardware Components
- selecting
component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting
passwords, Installing OpenVMS Using Option 1 of the Operating System Menu
- specifying
OpenVMS Cluster configuration, Joining an OpenVMS Cluster
- stages of, Installation Tasks
- system
information, providing, Installing OpenVMS Using Option 1 of the Operating System Menu
- third-party
networking software, Installing and Configuring Third-Party Networking Software
- windowing and networking products, Installing OpenVMS Using Option 1 of the Operating System Menu
- Installed
products
- displaying, Using the Show Installed Products Option (4)
- removing, Using the Remove Installed Products Option (6)
- Instant Capacity (see iCAP (Instant Capacity))
- Integrated
Lights Out
- (see iLO (Integrated Lights
Out))
- Integrity servers
- boot behavior
- configuring, Configuring and Managing OpenVMS Booting on Integrity servers - Alpha and Equivalent Integrity servers System Boot Commands
- boot
device
- setting, Configuring and Managing OpenVMS Booting on Integrity servers - Alpha and Equivalent Integrity servers System Boot Commands, Setting Boot Options for Your System Disk
- showing, Configuring and Managing OpenVMS Booting on Integrity servers, Setting Boot Options for Your System Disk, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- boot flag parameters
- setting, Adding a Boot Option and Setting Boot Flags
- boot options, Installing OpenVMS Using Option 1 of the Operating System Menu
- during
upgrade, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only), Upgrade Creates and Validates Boot Options (Integrity servers only)
- EFI boot menu, Overview of Using EFI
- managing, Configuring and Managing OpenVMS Booting on Integrity servers - Alpha and Equivalent Integrity servers System Boot Commands
- OpenVMS
Integrity servers installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- booting
- automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- conversational, Performing a Conversational (Interactive) Boot
- emergency, Emergency Booting
- failure, If the System Does Not Boot
- from a different
root, Booting from a Different Root Directory
- manually, Booting Manually from the Local System Disk
- with minimum
startup, Booting with Minimum Startup
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- commands
- and equivalent
Alpha commands, Alpha and Equivalent Integrity servers System Boot Commands
- console configuration, Selecting Your OpenVMS Console for the Integrity servers System
- documentation, Getting to Know Your Integrity servers, Configuring OpenVMS Integrity servers Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
- firmware, Firmware on Integrity server Systems - Updating Your Firmware from the Firmware Update CD
- getting started, Getting Started: Steps After You Unpack Your Integrity servers
- halting, Halting the Integrity servers to Recover from Hangs and Crashes
- hangs or crashes, Halt and Shutdown Procedures
- OE DVD, OpenVMS for Integrity servers Operating Environment DVD
- booting, Booting the OpenVMS Integrity servers OE DVD from the Local Drive
- overview, Getting to Know Your Integrity servers - Getting Started: Steps After You Unpack Your Integrity servers
- setting up and booting, Getting Started: Steps After You Unpack Your Integrity servers, Configuring OpenVMS Integrity servers Hardware Operation and Boot Operations, and Booting and Shutting Down Your System - Booting Without a User Authorization File
- shutting down, Shutting Down the System
- system event log (SEL), Booting Operations
- troubleshooting procedures, Detecting and Responding to System Problems
- utilities and console options, Configuration and Management Utilities for HP Integrity servers - Using the Delete or Backspace Key with Integrity server Utilities
- Integrity
VM guest operating system
- Installation, Installing the OpenVMS Guest Operating System, Installing the Guest Operating System
- Internationalization
(VMSI18N) data kit
- installation, Installing the OpenVMS Internationalization Data Kit
- IPC (Interrupt Priority
C), Preparing Your System for a Rolling Upgrade
- IPF Offline Diagnostics and Utilities
CD, Obtaining the IPF Offline Diagnostics and Utilities
- IPM (Insight Power
Manager), Integrity server Tools
- defined, Glossary
L
- LAN devices
- InfoServer support, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
- Layered
products
- defined, Glossary
- installing
- after OpenVMS installation
or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- alternative procedure, Alternative Procedure
- during
OpenVMS installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during OpenVMS upgrade, Shutting Down the System
- installing or upgrading independently
of system, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- registering, Using the Install or Upgrade Layered Products Option (3)
- Secure Delivery, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS Integrity servers and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- system
upgrade effect on, Licenses and Layered Products
- LIBDECOMP.COM, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- Libraries
- compressing and decompressing, Running AUTOGEN
- expanding or compressing, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- License
Management utility
- using, Registering Your Licenses
- Licenses, Installing OpenVMS Using Option 1 of the Operating System Menu
- registering
- after installation or
upgrade, Registering Your Licenses
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- update requirements for system upgrade, Update License Requirements
- upgrade effect on layered products, Licenses and Layered Products
- Local area OpenVMS Cluster
- defined, Glossary
- Local
drive
- defined, Key Terms, Glossary
- Log
- for installation, Hardware Components
- Logging in
- problems due to forgotten
password, Booting Without the User Authorization File, Booting Without a User Authorization File
- problems
due to login procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- problems
due to startup procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- Logical CPU
- defined, Glossary
- Logical names
- UAFALTERNATE, Booting Without the User Authorization File, Booting Without a User Authorization File
- Login command
procedures
- booting without, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- Login welcome message
- defining, Creating a System-Specific Login Welcome Message (Optional)
M
- Magnetic media
- defined, Key Terms
- Maintenance
Operations Protocol (MOP)
- defined, Glossary
- Management Processor (see MP (Management Processor))
- MCOE
- defined, Glossary
- Media
- defined, Glossary
- Migration support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- Minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
- Mission Critical
Operating Environment
- (see MCOE)
- Mixed-architecture OpenVMS Cluster
systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Notes and Restrictions
- OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
- Mixed-version OpenVMS
Cluster systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Preparing Your System for a Rolling Upgrade
- MODPARAMS.DAT
parameter file
- modifying after installation or upgrade, Modifying System Parameters
- modifying after upgrade, Modifying System Parameters After an Upgrade
- modifying before upgrade, Verifying System Parameters
- modifying for cluster, OpenVMS Cluster Parameters
- MOP server
- defined, Glossary
- MP (Management
Processor)
- co command, Selecting Your OpenVMS Console on rx2600 Integrity servers
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity servers
- setting as console interface, Selecting Your OpenVMS Console for the Integrity servers System
- Multihead
system
- configuring, Configuring a Multihead System (Optional), Selecting Your OpenVMS Console for the Integrity servers System
N
- NETCONFIG.COM
procedure
- running, Configuring DECnet
- Network
booting
- InfoServer, Setting Up and Performing Network Booting - Troubleshooting InfoServer Boot Problems
- Network
proxy authorization files
- creating, Creating Network Proxy Authorization Files
- Networking
products, Installing and Configuring Third-Party Networking Software
- (see also TCP/IP Services for OpenVMS, DECnet, DECnet
Phase IV, DECnet-Plus)
- configuring, Configuring DECnet
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- third-party
- installing, Installing and Configuring Third-Party Networking Software
- upgrading, Upgrading Windowing, Networking, and Related Products
- nPartition, Configuration and Management Utilities on Cell-Based Servers
- (see also Cell-based servers)
- ACPI configuration, Checking the ACPI Configuration for Booting OpenVMS in an nPartition
- BIB
(boot-is-blocked state), Booting OpenVMS Integrity servers on an nPartition, Orderly Shutdown, If the System Does Not Boot
- boot phase, Booting the nPartition Hardware
- defined, Glossary
- hardware booting, Booting the nPartition Hardware
- reboot for reconfiguration, Orderly Shutdown
- shutdown
for reconfiguration, Orderly Shutdown
- software booting, Booting OpenVMS Integrity servers on an nPartition
O
- ODS-2
- selecting
on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- selecting
on upgrade, Specifying the On-Disk Structure Level
- ODS-5
- selecting
on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- selecting on upgrade, Specifying the On-Disk Structure Level
- OE (Operating
Environment)
- DVD
- defined, Glossary
- for OpenVMS
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
- On-Disk Structure Level
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE
- OpenVMS Alpha
- boot behavior
- configuring, Setting and Showing Boot Devices
- boot flags, Setting Boot Flag Parameters
- booting
- automatic, Setting the System for Automatic Booting
- conversational, Performing a Conversational (Interactive) Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the System Disk
- with minimum startup, Booting with Minimum Startup
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- firmware, Firmware on Alpha Systems
- layered products
- installing, Alternative Procedure
- operating system CD, OpenVMS Alpha Operating System CD
- booting, Booting the OpenVMS Alpha Operating System CD
- shutting down, Shutting Down the System
- OpenVMS Cluster
- and OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
- BACKUP
caution, OpenVMS Cluster Caution
- becoming
a member
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Setting OpenVMS Cluster Membership Information
- preupgrade requirements, Adding a New System to an OpenVMS Cluster
- configuring
- after installation, Installing OpenVMS Using Option 1 of the Operating System Menu, Joining an OpenVMS Cluster
- during installation, Joining an OpenVMS Cluster
- defined, Glossary
- EXPECTED_VOTES parameter, OpenVMS Cluster Parameters
- group
number
- rules for creating, Required OpenVMS Cluster Information
- information
required for OpenVMS installation, Preparing to Install in an OpenVMS Cluster Environment - Beginning the Installation
- installation
- prompts, Joining an OpenVMS Cluster
- supplying ALLOCLASS parameter, Prompts for OpenVMS Cluster Configurations
- installing, Joining an OpenVMS Cluster
- installing TDC_RT, Installation in OpenVMS Clusters
- label
for system disk, Suggested Procedures
- local area, Glossary
- migration support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- mixed-version support, Mixed-Version Support in an OpenVMS Cluster Environment
- parameters
- after upgrade, OpenVMS Cluster Parameters
- password
- rules for creating, Required OpenVMS Cluster Information
- quorum
- adjusting using Availability Manager or DECamds, Preparing Your System for a Rolling Upgrade
- adjusting using IPC, Preparing Your System for a Rolling Upgrade
- maintaining during rolling upgrades, Preparing Your System for a Rolling Upgrade
- rebooting members, Rebooting Cluster Members (Upgrades Only)
- upgrade
- concurrent, Concurrent Upgrade
- preparing for, Preparing to Upgrade in an OpenVMS Cluster Environment - Preparing Your System for a Rolling Upgrade, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
- rolling, Rolling Upgrade, Notes and Restrictions
- setting membership
information, Setting OpenVMS Cluster Membership Information
- tasks after shutdown, What to Do After Shutdown
- types of, Types of Upgrades - Preparing Your System for a Rolling Upgrade
- warranted support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- OpenVMS Debugger
- installing clients on a PC, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Galaxy
- creating an instance, Installing OpenVMS Using Option 1 of the Operating System Menu, Setting OpenVMS Galaxy Information (Alpha Only)
- OpenVMS instance
- defined, Glossary
- OpenVMS Integrity
servers
- boot behavior
- configuring, Setting Boot Options for Your System Disk
- boot flags, Adding a Boot Option and Setting Boot Flags
- booting
- automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- conversational, Performing a Conversational (Interactive) Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the Local System Disk
- with minimum startup, Booting with Minimum Startup
- with
XDELTA, Booting with the XDelta Utility (XDELTA)
- component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- firmware, Firmware on Integrity server Systems
- layered products
- installing, Alternative Procedure
- OE DVD, OpenVMS for Integrity servers Operating Environment DVD
- booting, Booting the OpenVMS Integrity servers OE DVD from the Local Drive
- shutting down, Shutting Down the System
- OpenVMS Integrity
servers Boot Manager (BOOT_OPTIONS.COM) utility, Overview of Utilities and Console Options, Configuring and Managing OpenVMS Booting on Integrity servers
- (see also EFI Boot Manager)
- adding
boot entry for system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only), Setting Boot Options for Your System Disk
- changing
EFI boot timeout value, Setting EFI Boot Option Countdown Timer (Timeout)
- displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- overview, Overview of Using EFI
- OpenVMS
internationalization (VMSI18N) data kit
- installation, Installing the OpenVMS Internationalization Data Kit
- OpenVMS Management Station
- defined, Glossary
- defining TCP/IP nodes, Defining TCP/IP Nodes
- disk quotas, Enabling Disk Quotas
- error log, Error Log Information
- getting started, Getting Started with OpenVMS Management Station
- preparing the PC, Preparing Your PC
- preparing to use, Preparing to Use OpenVMS Management Station (Optional), Preparing to Use OpenVMS Management Station - Getting Started with OpenVMS Management Station
- problem reporting, Determining and Reporting Problems
- removing, Removing OpenVMS Management Station
- server
- removing, Removing the OpenVMS Management Station Server
- system files, Editing the System Files
- uninstalling V2.1 client, Removing Version 2.1 of the OpenVMS Management Station Client
- Operating Environment
- (see OE (Operating Environment))
- Operating
system
- CD
- defined, Glossary
- files
- removing, Removing the OpenVMS Operating System
- media
- defined, Key Terms, Glossary
- Operating system CD/DVD
- booting for installation, Booting the OpenVMS Operating System Media - Booting Using vMedia, Booting the OpenVMS Alpha CD, Booting the OpenVMS Integrity servers OE DVD
- booting for upgrade, Booting the OpenVMS Operating System Media - Booting Using vMedia, Booting the OpenVMS Integrity servers OE DVD
- Operating system
menu
- accessing DCL, Using the Execute DCL Option (8)
- displaying installed products, Using the Show Installed Products Option (4) - Using the Show Installed Products Option (4)
- displaying layered products, Using the Display Layered Products Option (2) - Using the Display Layered Products Option (2)
- installing OpenVMS, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1) - PRESERVE Option, Installing OpenVMS Using Option 1 of the Operating System Menu - Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading layered products, Using the Install or Upgrade Layered Products Option (3) - Using the Install or Upgrade Layered Products Option (3)
- patches and recovery data operations, Using the Patches and Recovery Data Option (7) - Using the Patches and Recovery Data Option (7)
- reconfiguring installed products, Using the Reconfigure Installed Products Option (5) - Using the Reconfigure Installed Products Option (5)
- removing installed products, Using the Remove Installed Products Option (6) - Using the Remove Installed Products Option (6)
- shutting down the system, Using the Shutdown Option (9)
- upgrading OpenVMS, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1) - PRESERVE Option, Upgrading the System Using Option 1 of the Operating System Menu - Shutting Down the System
- using, Using the Operating System Menu - Using the Shutdown Option (9)
- Output
- saving from installation, Hardware Components
P
- Page file
- checking size, System File Sizes
- modifying size, Running AUTOGEN to Tune the System
- PAK (Product Authorization
Key)
- registering after an installation or upgrade, Registering Your Licenses
- registering during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- Partition
- defined, Glossary
- Partition Manager, Cell-Based Server Terminology, Configuration and Management Utilities on Cell-Based Servers
- Password
- forgotten, Logging In from a Character-Cell Terminal, Booting Without the User Authorization File, Booting Without a User Authorization File
- minimum
length, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- Patches
- finding, installing, removing
- using
distribution media menu option, Using the Patches and Recovery Data Option (7)
- installing from download, Installing Patches (Optional but Recommended)
- required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- Secure Delivery, Installing Patches (Optional but Recommended)
- PATHWORKS for OpenVMS (Advanced Server)
- defined, Glossary
- PCSI
- and recovery data, Checking for Recovery Data
- installing layered products independently, Alternative Procedure
- installing patches
- using FTP, Installing Patches (Optional but Recommended)
- installing
the operating system, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading the operating system, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- Performance
Data Collector (TDC)
- defined, Glossary
- Performance
Data Collector base software (TDC_RT)
- compatibility
with prior releases, Compatibility with Prior Releases
- defined, Glossary
- initializing
and running, Initializing and Running the Performance Data Collector Base Software (Optional)
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- in OpenVMS Clusters, Installation in OpenVMS Clusters
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- running
the software, Running TDC_RT
- startup
file, Startup File
- upgrading, Upgrading Windowing, Networking, and Related Products
- user privileges
and quotas, User Privileges and Quotas
- Platform
- defined, Glossary
- PMAD TURBOchannel
adapter
- booting system, Booting over the Network with an Alternate TURBOchannel Adapter
- PMAZB TURBOchannel adapter
- booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- PMAZC TURBOchannel adapter
- booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- POLYCENTER
Software Installation utility
- (see PCSI)
- POSSE (Pre-OS System Environment)
- defined, Glossary
- HP implementation of EFI, Overview of Utilities and Console Options
- Postinstallation
tasks
- accounts, Creating Accounts (New Installations, Some Upgrades)
- AUTOGEN
- to set system parameter changes, Running AUTOGEN to Set System Parameter Changes
- tuning the
system, Running AUTOGEN to Tune the System
- Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
- backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
- BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
- CDSA initialization, Initializing CDSA (Optional)
- checklist, Postinstallation and Postupgrade Tasks
- customizing the system, Customizing the System (New Installations, Some Upgrades) - Installing and Configuring Third-Party Networking Software
- DECnet configuration, Configuring DECnet
- iCAP configuration, Configure the Instant Capacity Software (Optional; Integrity servers only)
- Kerberos configuration, Configuring Kerberos (Optional)
- layered products, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- license registration, Registering Your Licenses
- login welcome message, Creating a System-Specific Login Welcome Message (Optional)
- MODPARAMS.DAT file, Modifying System Parameters
- multihead system configuration, Configuring a Multihead System (Optional), Selecting Your OpenVMS Console for the Integrity servers System
- network proxy authorization files, Creating Network Proxy Authorization Files
- OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
- patches, Installing Patches (Optional but Recommended)
- print queues, Creating Print Queues (New Installations, Some Upgrades)
- queue manager and default queues, Setting Up the Queue Manager and Default Queues
- shadow sets
- system
parameters, Set System Parameters for Volume Shadowing (Optional)
- shadow sets, forming, Forming the Shadow Set
- SSL configuration, Configuring SSL for OpenVMS (Optional)
- SYSTARTUP_VMS.COM procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- system files, Adding and Removing Operating System Files (Optional)
- system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
- TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
- testing the system, Testing the System with UETP (Optional)
- third-party networking software configuration, Installing and Configuring Third-Party Networking Software
- tuning the system, Running AUTOGEN to Tune the System
- WBEM Providers for OpenVMS, Configure WBEM Providers for OpenVMS (Optional; Integrity servers only)
- WBEM Services for OpenVMS configuration, Configure WBEM Services for OpenVMS (Optional; Integrity servers only)
- Postupgrade tasks
- accounts, Creating Accounts (New Installations, Some Upgrades)
- AUTOGEN
- to set system
parameter changes, Running AUTOGEN to Set System Parameter Changes
- turning the system, Running AUTOGEN to Tune the System
- Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
- backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
- BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
- CDSA initialization, Initializing CDSA (Optional)
- checklist, Postinstallation and Postupgrade Tasks
- cluster members, Rebooting Cluster Members (Upgrades Only)
- command procedure templates, Examining Your Command Procedures (Upgrades Only)
- customizing the system, Customizing the System (New Installations, Some Upgrades) - Installing and Configuring Third-Party Networking Software
- DECnet configuration, Configuring DECnet
- dump file size, Running AUTOGEN to Tune the System
- iCAP configuration, Configure the Instant Capacity Software (Optional; Integrity servers only)
- Kerberos configuration, Configuring Kerberos (Optional)
- layered products, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- license registration, Registering Your Licenses
- login welcome message, Creating a System-Specific Login Welcome Message (Optional)
- MODPARAMS.DAT file, Modifying System Parameters, Modifying System Parameters After an Upgrade
- multihead system configuration, Configuring a Multihead System (Optional), Selecting Your OpenVMS Console for the Integrity servers System
- network proxy authorization files, Creating Network Proxy Authorization Files
- OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
- page
file size, Running AUTOGEN to Tune the System
- patches, Installing Patches (Optional but Recommended)
- print queues, Creating Print Queues (New Installations, Some Upgrades)
- queue manager and default queues, Setting Up the Queue Manager and Default Queues
- shadow sets
- license
required, Registering Your Licenses
- shadow sets reformation, Reforming the Shadow Set as Final Postupgrade Backup
- shadow sets, forming, Forming the Shadow Set
- SSL configuration, Configuring SSL for OpenVMS (Optional)
- swap file size, Running AUTOGEN to Tune the System
- SYSTARTUP_VMS.COM
procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- system files
- adding
or removing, Adding and Removing Operating System Files (Optional)
- sizes, System File Sizes
- system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
- TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
- testing the system, Testing the System with UETP (Optional)
- third-party networking software configuration, Installing and Configuring Third-Party Networking Software
- tuning the operating system, Running AUTOGEN to Tune the System
- WBEM Providers for OpenVMS configuration, Configure WBEM Providers for OpenVMS (Optional; Integrity servers only)
- WBEM Services for OpenVMS configuration, Configure WBEM Services for OpenVMS (Optional; Integrity servers only)
- Pre-OS System
Environment
- (see POSSE (Pre-OS System
Environment))
- Preinstallation
tasks
- collecting information for, Responding to Prompts During Installation
- firmware revision checking, Firmware on Alpha Systems, Checking Firmware Version
- OpenVMS Cluster
environment, Preparing to Install in an OpenVMS Cluster Environment - Beginning the Installation
- software and hardware components, Examining Hardware and Software Components
- PRESERVE option, PRESERVE Option
- Preupgrade tasks
- backing
up system disk, Backing Up the System Disk
- checklist, Preupgrade Tasks
- OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
- DECamds and DECram, Software That Must Be Manually Removed
- FEEDBACK.DAT file, Ensuring You Have a Recent FEEDBACK.DAT File
- shutting
down system, Finishing Preupgrade Tasks
- system disk, Preparing the System Disk, Examining the System Disk
- volume
shadowing, Shadowing Environment
- Print
queue
- creating after installation or upgrade, Creating Print Queues (New Installations, Some Upgrades)
- default
- creating, Setting Up the Queue Manager and Default Queues
- Printer
- recording installation on, Hardware Components
- Problems
- booting, Booting with Default System Parameters, Booting with Default System Parameters
- troubleshooting, If the System Does Not Boot, If the System Does Not Boot
- locked out of system, Booting Without the User Authorization File, Booting Without a User Authorization File
- logging in, Booting Without Startup and Login Procedures, Booting Without the User Authorization File, Booting Without Startup and Login Procedures, Booting Without a User Authorization File
- Product Authorization
Key
- (see PAK (Product Authorization
Key))
- PRODUCT
INSTALL command, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- PRODUCT REMOVE
command
- files not removed with, Removing the OpenVMS Operating System
- removing operating system files, Removing the OpenVMS Operating System
- Provisioning, About HP SIM and Provisioning
- defined, Glossary
- HP SIM and Windows server
setup, Setting Up HP SIM and the Windows Server to Provision OpenVMS
- plug-in, Installing or Upgrading the OpenVMS Provisioning Plug-in for HP SIM
- procedure, Provisioning OpenVMS
- requirements, Prerequisites for HP SIM Provisioning
- with InfoServer
- setting up, Setting Up InfoServer Support
- with vMedia
- setting up, Setting Up vMedia
- Proxy files
- (see Network proxy authorization files)
R
- Reboot, Rebooting After AUTOGEN
- (see also Boot, Booting)
- after AUTOGEN, Rebooting After AUTOGEN
- after installation, Rebooting After AUTOGEN
- automatic
after AUTOGEN, Rebooting After AUTOGEN
- example, Booting with Default System Parameters, Booting with Default System Parameters
- OpenVMS Cluster members, Rebooting Cluster Members (Upgrades Only)
- Recovery data
- checking for during upgrade, Checking for Recovery Data
- displaying and installing
- using distribution
media menu option, Using the Patches and Recovery Data Option (7)
- Release
notes
- after installation or upgrade, Customizing the System (New Installations, Some Upgrades)
- before installation, Software Components
- Remedial
kits
- deleting archived files, Saving Archived Files
- required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- saving archived files, Saving Archived Files
- Removing
operating system files, Removing the OpenVMS Operating System
- Restoring
system disk, Restoring the System Disk
- without booting the OpenVMS CD or
DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Restrictions
- for OpenVMS upgrade, Notes, Cautions, and Restrictions
- Rolling upgrades
- caution, Preparing Your System for a Rolling Upgrade
- defined, Glossary
- description, Rolling Upgrade
- maintaining cluster quorum, Preparing Your System for a Rolling Upgrade
- operating
system version required, Notes and Restrictions
- preparing system for, Preparing Your System for a Rolling Upgrade
- restrictions, Notes and Restrictions
- tasks after shutdown, What to Do After Shutdown
S
- SAN disk, Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
- SAN
storage device
- delay in EFI initialization, Booting from the Local Drive, Booting from the Local Drive, Booting the OpenVMS Integrity servers OE DVD from the Local Drive, Configuring and Booting FC Boot Device
- graphic, Fibre Channel Host and SAN Storage Controller Configuration
- Satellite
booting, Adding the Network Boot Option to the EFI Boot Manager
- Satellite
node
- defined, Glossary
- Save sets
- transferring to system disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- Scratch disk
- defined, Glossary
- SCSSYSTEMID system parameter
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- SDA (System
Dump Analyzer), Emergency Shutdown with Crash Commands
- Secure Delivery
- and distribution kits, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS Integrity servers and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- and installing patches, Installing Patches (Optional but Recommended)
- defined, Glossary
- Selecting active console devices, Selecting Your OpenVMS Console on rx2600 Integrity servers
- Server complex
- defined, Glossary
- SET AUTO_ACTION
command, Setting the System for Automatic Booting
- SET
BOOT command, Writing a New Boot Block
- SET BOOT_OSFLAGS
command, Setting Boot Flag Parameters
- SET BOOTDEF_DEV command, Setting and Showing Boot Devices
- SETBOOTBLOCK command, Writing a New Boot Block
- Shadow sets, Shadowing Environment
- (see also Volume
shadowing)
- adding to boot and dump device lists, Installing OpenVMS Using Option 1 of the Operating System Menu, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only)
- backing up system disk, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- forming, Forming the Shadow Set
- license required, Registering Your Licenses
- system parameters, Set System Parameters for Volume Shadowing (Optional)
- reforming, Reforming the Shadow Set as Final Postupgrade Backup
- system disk
- upgrading, Shadowing Environment
- SHOW BOOTDEF_DEV
command, Setting and Showing Boot Devices
- SHOW CRASH command, Emergency Shutdown with Crash Commands
- Shutdown
- after
installation, Rebooting After AUTOGEN
- before
an upgrade, Finishing Preupgrade Tasks, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
- procedures, Shutting Down the System, Shutting Down the System
- Shutdown option, Using the Shutdown Option (9)
- SHUTDOWN.COM, Shutting Down the System, Orderly Shutdown, Shutting Down the System, Orderly Shutdown
- SIM (see HP
SIM (Systems Insight Manager))
- SIPs (System Integrated
Products)
- defined, Glossary
- installing after installation
or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- Secure Delivery, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
- differences between OpenVMS Alpha and
OpenVMS Integrity servers, Differences Between OpenVMS Integrity servers and Alpha Installations
- during
installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during
upgrade, Secure Delivery Validation
- Site-specific
command procedures
- restored during upgrade, Examining Your Command Procedures (Upgrades Only)
- Source drive, Key Terms, Mounting Devices
- defined, Key Terms
- SSL for OpenVMS
- configuring, Configuring SSL for OpenVMS (Optional)
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing
or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- Standalone
Backup, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Startup command
procedure
- booting without, Booting Without Startup and Login Procedures
- errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- Swap file
- checking
size, System File Sizes
- modifying
size, Running AUTOGEN to Tune the System
- SWAPFILES.COM
procedure
- executing to change system file sizes, System File Sizes
- SYS$BATCH
queue
- creating, Setting Up the Queue Manager and Default Queues
- SYS$EFI.SYS file
- and
writing a boot block, Writing a New Boot Block
- SYS$PRINT queue
- creating, Setting Up the Queue Manager and Default Queues
- SYS$UPDATE.STABACKIT.COM
procedure, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- SYS$WELCOME
- defining, Creating a System-Specific Login Welcome Message (Optional)
- SYSBOOT.EXE, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- commands, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- SYSGEN
- ALLOCLASS parameter
- for shadow sets, Set System Parameters for Volume Shadowing (Optional)
- setting during
installation, Required OpenVMS Cluster Information, Joining an OpenVMS Cluster
- commands
for conversational boot, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- SYSTARTUP_VMS.COM procedure
- editing to control DECnet Phase IV, Configuring DECnet
- for starting network software at boot, Configuring DECnet
- updating to start layered products and
print queues, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- System
- customizing, Customizing the System (New Installations, Some Upgrades) - Installing and Configuring Third-Party Networking Software
- files
- adding, Adding and Removing Operating System Files (Optional)
- removing, Adding and Removing Operating System Files (Optional)
- hang, Detecting and Responding to System Problems, Detecting and Responding to System Problems
- libraries
- compressing and decompressing, Running AUTOGEN
- expanding or compressing, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- parameters
- booting with default, Booting with Default System Parameters, Booting with Default System Parameters
- for volume shadowing, Set System Parameters for Volume Shadowing (Optional)
- incorrect values prevent
boot, Booting with Default System Parameters, Booting with Default System Parameters
- modifying after installation
or upgrade, Modifying System Parameters
- modifying after upgrade, Modifying System Parameters After an Upgrade
- modifying before upgrade, Verifying System Parameters
- verifying, Verifying System Parameters
- problems
- troubleshooting, If the System Does Not Boot, Detecting and Responding to System Problems, If the System Does Not Boot, Detecting and Responding to System Problems
- shutting
down before upgrade, Finishing Preupgrade Tasks
- startup in an emergency, Booting in an Emergency, Emergency Booting
- with default
system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup
and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the
UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
- SYSTEM account
- forgotten password, Logging In from a Character-Cell Terminal
- logging in, Logging In to the SYSTEM Account
- setting
password, Installing OpenVMS Using Option 1 of the Operating System Menu
- System disk
- adding
boot entry to EFI Boot Manager menu, Installing OpenVMS Using Option 1 of the Operating System Menu, Selecting Whether to Allow the Procedure to Create and Validate Boot Options (Integrity servers only), Upgrade Creates and Validates Boot Options (Integrity servers only), Setting Boot Options for Your System Disk
- adding
system files, Adding and Removing Operating System Files (Optional)
- analyzing and repairing, Examining the System Disk
- backing
up, Backing Up and Restoring the System Disk - Using the Alternate System Disk
- after an
installation, Backing Up the Customized System Disk and Initiating Systematic Backups
- after installation
or upgrade, Backing Up Your System Disk
- alternate disk for, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- before an
upgrade, Backing Up the System Disk
- from OpenVMS main menu, Using the Operating System Menu
- boot options, Setting Boot Options for Your System Disk
- booting, Booting the New OpenVMS System Disk, Booting Manually from the System Disk, Booting Manually from the Local System Disk
- after installation, Rebooting After AUTOGEN
- after transferring
required save set, Specifying the Default Boot Device on OpenVMS Alpha Systems
- checking amount of free space on, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- creating, Installing OpenVMS Using Option 1 of the Operating System Menu
- defined, Key Terms, Glossary
- initializing, Installing OpenVMS Using Option 1 of the Operating System Menu, Selecting INITIALIZE or PRESERVE
- alternative methods, INITIALIZE Option, Alternative Ways to Initialize the System Disk, Alternative Method of Initialization
- preparing an alternate for backup, Preparing an Alternate System Disk
- preparing for upgrade, Preparing the System Disk
- preserving, PRESERVE Option, Installing OpenVMS Using Option 1 of the Operating System Menu, Selecting INITIALIZE or PRESERVE
- removing
system files, Adding and Removing Operating System Files (Optional)
- restoring, Restoring the System Disk
- restoring
files on, Using the Operating System Menu
- space needed
- for upgrade, Checking the Size of the System Disk
- to decompress
libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only) Compressing the System Libraries (Optional, OpenVMS Integrity servers: Not Recommended)
- specifying
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Specifying the Target Disk
- unique volume label requirement, Suggested Procedures
- upgrading, Shadowing Environment
- System Dump Analyzer
- (see SDA)
- System event log (SEL), Booting Operations
- System Generation utility
- (see SYSGEN)
- System
Integrated Products
- (see SIPs (System
Integrated Products), Layered products)
- SYSTEST
account
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- SYSUAFALT.DAT file, Booting Without the User Authorization File, Booting Without a User Authorization File
T
- Target disk
- using
backup copy for, Backing Up the System Disk
- Target
drive, Mounting Devices
- defined, Key Terms
- TCP/IP
- third-party
- installing, Installing and Configuring Third-Party Networking Software
- OpenVMS Management Station, Running Third-Party TCP/IP Stacks
- TCP/IP Services for OpenVMS
- configuring, Configuring HP TCP/IP Services for OpenVMS
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrade
- remove
older versions prior to, Software That Must Be Manually Removed
- upgrading, Upgrading Windowing, Networking, and Related Products
- TDC
- (see Performance Data
Collector base software (TDC_RT), Performance Data Collector (TDC))
- TDC_RT
- (see Performance Data Collector base software
(TDC_RT))
- TDF
- setting during
an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- Temporary Instant Capacity (see TiCAP
(Temporary Instant Capacity))
- TiCAP (Temporary Instant Capacity)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- Time differential factor
- (see TDF)
- Time zones
- setting
during an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- updating
during an upgrade, Updating Time Zone Information
- Timeout
- EFI boot option, Setting EFI Boot Option Countdown Timer (Timeout)
- Troubleshooting
- InfoServer boot problems, Troubleshooting InfoServer Boot Problems
- system
problems, If the System Does Not Boot, If the System Does Not Boot
- Tuning operating system, Running AUTOGEN to Tune the System
- TURBOchannel
- booting
- with alternate adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAD adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
U
- UAFALTERNATE
logical name, Booting Without the User Authorization File, Booting Without a User Authorization File
- UETP (User
Environment Test Package), Testing the System with UETP (Optional)
- defined, Glossary
- Uninstall
- OpenVMS
operating system, Removing the OpenVMS Operating System
- recovery
data for, Checking for Recovery Data
- Upgrade, Upgrading the OpenVMS Operating System - What to Do After Shutdown
- booting
- operating system CD/DVD, Booting the OpenVMS Operating System Media - Booting Using vMedia
- cautions and restrictions, Notes, Cautions, and Restrictions
- checklist, Upgrade Tasks
- concurrent (OpenVMS Cluster), Concurrent Upgrade
- DECram, Remove Older Versions of DECram for OpenVMS (Alpha Only)
- disk space requirement, Checking the Size of the System Disk
- effect
- on command procedures, Examining Your Command Procedures (Upgrades Only)
- on layered products, Licenses and Layered Products
- on MODPARAMS.DAT file, Modifying System Parameters After an Upgrade
- OpenVMS Cluster
- adding a new CPU, Adding a New System to an OpenVMS Cluster
- preliminary tasks, Preupgrade Tasks for OpenVMS Cluster Environments - Preparing Your System for a Rolling Upgrade
- preparing for, Preparing to Upgrade in an OpenVMS Cluster Environment - Preparing Your System for a Rolling Upgrade
- required operating system version, Notes and Restrictions
- paths, Upgrade Paths
- PCSI, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- preparation checklist, Preupgrade Tasks
- procedure, Upgrading the System Using Option 1 of the Operating System Menu - Shutting Down the System
- recovery data, Checking for Recovery Data
- rolling
(OpenVMS Cluster), Rolling Upgrade
- shadowed disks, Shadowing Environment
- stages of, Upgrade Tasks
- time zones, Updating Time Zone Information
- User accounts
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- User authorization file (see UAF)
- User Environment Test Package
- (see UETP)
V
- VC, Virtual Connect (VC) on HP BladeSystem c-Class Enclosures
- VGA graphics
as console device, Selecting Your OpenVMS Console for the Integrity servers System, Selecting Your OpenVMS Console on rx2600 Integrity servers
- Virtual
Connect
- (see VC)
- virtual console
- defined, Glossary
- virtual device
- defined, Glossary
- virtual machine
- defined, Glossary
- Virtual
media
- (see vMedia (Virtual Media))
- Virtual partition
- defined, Glossary
- vKVM
- defined, Glossary
- vMedia (Virtual Media), About HP SIM and Provisioning
- defined, Glossary
- for provisioning
- setting up, Setting Up vMedia
- using independently of HP SIM, Using vMedia Independently of HP SIM
- vms_bcfg command, Using EFI to Set Automatic Booting of Your System Disk, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- vms_show command, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- VMSI18N, Installing the OpenVMS Internationalization Data Kit
- VMSINSTAL
utility, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- installing layered products independently, Alternative Procedure
- Volume label
- OpenVMS
Alpha operating system CD, OpenVMS Alpha Operating System CD
- OpenVMS Integrity servers OE DVD, OpenVMS for Integrity servers Operating Environment DVD
- requirement for OpenVMS
Clusters, Suggested Procedures
- specifying
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Specifying the Volume Label
- Volume
shadowing, Shadowing Environment
- (see also Shadow sets)
- backing up the system disk, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- defined, Glossary
- forming shadow set, Forming the Shadow Set
- license required, Registering Your Licenses
- system parameters, Set System Parameters for Volume Shadowing (Optional)
- preparing for upgrade, Shadowing Environment
- reforming shadow set, Reforming the Shadow Set as Final Postupgrade Backup
- VOTES parameter
- checking
for rolling upgrades, Preparing Your System for a Rolling Upgrade
W
- Warranted
support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- WBEM Providers
for OpenVMS
- configuring, Configure WBEM Providers for OpenVMS (Optional; Integrity servers only)
- defined, Glossary
- WBEM Services for OpenVMS
- configuring, Configure WBEM Services for OpenVMS (Optional; Integrity servers only)
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
- WBEMCIM
- (see WBEM Services
for OpenVMS)
- Welcome message
- defining, Creating a System-Specific Login Welcome Message (Optional)
- Windowing
products
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- upgrading, Upgrading Windowing, Networking, and Related Products
- Writeboot
utility, Writing a New Boot Block
- wwidmgr
- -show wwid command, Viewing the FC Configuration from the Console