| Previous | Contents | Index |
The NET command accepts a subset of the LAN Manager Net commands and attempts to perform the equivalent ADMINISTER command. This provides some level of backward compatability with PATHWORKS LAN Manager servers.
NET [/qualifier] command-line
command-line
Specifies the Net command line that you wish to process.
/TRANSLATE
The /TRANSLATE qualifier must precede the command-line parameter. Use it to display the equivalent ADMINISTER command without performing the command action. This enables you to determine the equivalent command without actually performing the command.
| #1 |
|---|
LANDOFOZ\\TINMAN> NET/TRANSLATE ACCOUNT
Translated command is: SHOW ACCOUNT POLICY
|
This example translates the LAN Manager NET ACCOUNT command into the equivalent ADMINISTER command and displays the resulting translation without performing the command action.
| #2 |
|---|
LANDOFOZ\\TINMAN> NET ACCOUNT
Account Policy for domain "LANDOFOZ":
Minimum password age (days) : 1
Maximum password age (days) : 90
Minimum password length : 0
Length of password history maintained : None
Force user logoff after logon hours expire : NO
Lock out account after how many bad password attempts : Never
Role of server TINMAN : Primary Domain Controller
|
This example translates the LAN Manager NET ACCOUNT command into the equivalent ADMINISTER command (SHOW ACCOUNT POLICY) and performs the command action.
Pauses a currently active OpenVMS Advanced Server print queue. Use the SHOW PRINT QUEUES command to display the list of available queues. This command performs the same function as the SET PRINT QUEUE queue-name /PAUSE command.
PAUSE PRINT QUEUE queue-name [/qualifiers]
This command is valid only to Compaq OpenVMS servers. Use of this command requires membership in the Administrators, Server Operators, or Print Operators local group.
ADD PRINT QUEUE
CONTINUE PRINT QUEUE
REMOVE PRINT QUEUE
SET PRINT QUEUE
SHOW PRINT QUEUES
queue-name
Specifies the name of the print queue for which to pause printing.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./SERVER=server-name
Specifies the name of the server where the specified print queue resides. The default is the server currently being administered.
LANDOFOZ\\TINMAN> PAUSE PRINT QUEUE LN03/NOCONFIRM
%PWRK-S-QUESET, queue "LN03" paused on server "TINMAN"
|
This example pauses the print queue LN03 on the server currently being administered (TINMAN). A confirmation is not required.
Pauses a currently active service. You can pause only the Server and NetLogon services. Use the SHOW SERVICES command to display the available services.Pausing the Server service prevents users from making new connections to the server's shared resources; however, users who have already connected to shared resources can continue to use the resources. Pausing the Server service does not prevent users who are members of the Administrators group from connecting to the service.
Pausing the NetLogon service prevents the server from synchronizing the domain's security accounts database. The server will not validate logons.
PAUSE SERVICE servicename [/qualifiers]
Use of this command requires membership in the Administrators local group or the Server Operators local group. You cannot pause the Replicator and Messenger services from the Advanced Server.
CONTINUE SERVICE
SHOW SERVICES
START SERVICE
STOP SERVICE
servicename
Specifies the name of the service to pause.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./SERVER=server-name
Specifies the name of the server on which to pause the service. The default is the server currently being administered.
LANDOFOZ\\TINMAN> PAUSE SERVICE NETLOGON
Do you really want to pause service "NETLOGON" [YES or NO] (YES) : YES
%PWRK-S-SVCPAUSE, service "NETLOGON" paused on server "TINMAN"
|
This example pauses the NetLogon service on the server currently being administered (TINMAN). A confirmation is required.
Removes a computer from a domain. The computer's account is deleted from the domain's security database, and it can no longer participate in domain security.
REMOVE COMPUTER computer-name [/qualifiers]
Do not remove the primary domain controller for a domain. Use of this command requires membership in the Administrators local group.
ADD COMPUTER
SET COMPUTER
SHOW COMPUTERS
computer-name
Specifies the name of the computer to remove from the domain.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./DOMAIN=domain-name
Specifies the name of the domain from which to remove the computer. The default is the domain currently being administered. Do not specify both /DOMAIN and /SERVER on the same command line./SERVER=server-name
Specifies the name of a server that is a member of the domain from which to remove the computer. Do not specify both /DOMAIN and /SERVER on the same command line.
LANDOFOZ\\TINMAN> REMOVE COMPUTER DOROTHY
Removing computer "DOROTHY" from domain "LANDOFOZ" will render it
incapable of authenticating domain logons until it is added to another
domain.
Do you want to continue with the removal [YES or NO] (YES) : YES
%PWRK-S-COMPREM, computer "DOROTHY" removed from domain "LANDOFOZ"
|
This example removes the computer named DOROTHY from the default domain's (LANDOFOZ) security database. A confirmation is displayed.
Permanently removes a local or global group from a domain's security database.Be sure you want to delete a group before you do so, because a deleted group cannot be recovered. The server knows every group by its security identifier (SID), a unique number that identifies it. If you delete a group and then create another group with the same name, the new group will not have any of the permissions that were previously granted to the old group, because the groups have different SID numbers.
REMOVE GROUP group-name [/qualifiers]
Use of this command requires membership in the Administrators or Account Operators local group.
ADD GROUP
COPY GROUP
MODIFY GROUP
SHOW GROUPS
group-name
Specifies the name of an existing group to be removed.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./DOMAIN=domain-name
Specifies the name of the domain from which to remove the group. The default is the domain currently being administered. Do not specify both /DOMAIN and /SERVER on the same command line./SERVER=server-name
Specifies the name of a server that is a member of the domain from which to remove the group. Do not specify both /DOMAIN and /SERVER on the same command line.
LANDOFOZ\\TINMAN> REMOVE GROUP MUNCHKINS
Each group is represented by a unique identifier that is independent
of the group name. Once this group is deleted, even creating an
identically named group in the future will not restore access to
resources which currently name this group in the access control list.
Remove group "MUNCHKINS" [YES or NO] (YES) : YES
%PWRK-S-GROUPREM, group "MUNCHKINS" removed from domain "LANDOFOZ"
|
This example removes the group named MUNCHKINS from the default domain (LANDOFOZ). A confirmation is required.
Removes a user account mapping between an Advanced Server user account and an OpenVMS user account.
REMOVE HOSTMAP [domain-name\]user-name [/qualifiers]
This command is valid only to Compaq OpenVMS servers. Use of this command requires membership in the Administrators local group.
ADD HOSTMAP
SHOW HOSTMAP
[domain-name\]user-name
Specifies the Advanced Server or OpenVMS user account name whose mapping is to be removed. To remove the mapping of a network user in a trusted domain, specify the domain-qualified user name in the format domain-name\user-name, such as KANSAS\DOLE, where KANSAS is the trusted domain, and DOLE is the user name of the user account defined in the trusted domain. If you omit the domain name, the user account is assumed to be defined in the domain of the server currently being administered.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./HOSTUSER
Indicates that the specified user name is an OpenVMS user name. All Advanced Server user account mappings to the specified OpenVMS user name will be removed.Note that more than one Advanced Server user name may be mapped to a single OpenVMS user name. Use the SHOW HOSTMAP command to check. Removing the mappings for an OpenVMS user name may result in the removal of more than one Advanced Server user name mapping.
Do not specify both /HOSTUSER and /NETUSER on the same command line.
/NETUSER
Indicates that the specified user name is an Advanced Server user name. The account mapping for the specified Advanced Server user name will be removed. This is the default if you specify neither /NETUSER nor /HOSTUSER. Do not specify both /HOSTUSER and /NETUSER on the same command line./SERVER=server-name
Specifies the name of the server on which to remove the host account mapping. The default is the server currently being administered.
| #1 |
|---|
LANDOFOZ\\TINMAN> REMOVE HOSTMAP WITCH/NETUSER
Do you really want to remove host mapping for "WITCH" [YES or NO] (YES) :
%PWRK-S-HOSTMAPREM, mapping for user "WITCH" removed
|
This example removes the user account mapping for the Advanced Server user name WITCH on the server currently being administered (TINMAN). A confirmation is required.
| #2 |
|---|
LANDOFOZ\\TINMAN> REMOVE HOSTMAP STRAWMAN/HOSTUSER/NOCONFIRM
%PWRK-S-HOSTMAPSREM, mappings to user "STRAWMAN" removed
|
This example removes all Advanced Server user account mappings to the OpenVMS user name STRAWMAN on the server currently being administered (TINMAN). A confirmation is not required.
Removes an existing OpenVMS Advanced Server print queue.Before deleting a printer queue (one that points directly to an OpenVMS execution queue), execute the following commands, in the order shown:
- PAUSE PRINT QUEUE --- to pause the print queue. You do not have to pause a routing queue before deleting it. (When you use the REMOVE PRINT QUEUE command to delete a print queue, the queue is not deleted until all jobs in that queue complete.)
- REMOVE PRINT QUEUE --- to delete any routing queues that point to the printer queue.
Then, use the REMOVE PRINT QUEUE command to delete the printer queue.
To delete a print queue and all pending jobs in that queue except the job currently printing, first use the SET PRINT QUEUE/PURGE command to delete the pending print jobs, then use the REMOVE PRINT QUEUE command.
To remove a print queue and all jobs in its queue, including the one currently printing, use the following commands, in the order shown:
- SET PRINT QUEUE/PURGE --- to delete all pending print jobs.
- SET PRINT JOB/DELETE --- to delete the currently printing job.
- REMOVE PRINT QUEUE --- to delete the queue.
REMOVE PRINT QUEUE queue-name [/qualifiers]
This command is valid only to Compaq OpenVMS servers. Use of this command requires membership in the Administrators, Server Operators, or Print Operators local group.You can delete only those queues created by the Advanced Server. You cannot use ADMINISTER commands to delete a queue created by DECprint Supervisor for OpenVMS or OpenVMS software.
If Windows NT printer management is enabled on the server, do not use the REMOVE PRINT QUEUE command on the Advanced Server for OpenVMS. Use Windows NT print services.
ADD PRINT QUEUE
CONTINUE PRINT QUEUE
PAUSE PRINT QUEUE
SET PRINT QUEUE
SHOW PRINT QUEUES
queue-name
Specifies the name of the print queue to remove.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./SERVER=server-name
Specifies the name of the server from which to remove the print queue. The default is the server currently being administered.
LANDOFOZ\\TINMAN> REMOVE PRINT QUEUE TOTO
Do you really want to remove print queue "TOTO" [YES or NO] (YES) : YES
%PWRK-S-QUEREM, queue "TOTO" removed from server "TINMAN"
|
This example removes the print queue TOTO from the server currently being administered (TINMAN). A confirmation is required.
Removes an existing directory or print share from a server's share database. The resource will no longer be available to the network.
REMOVE SHARE share-name [/qualifiers]
Membership in the Administrators, Account Operators, or Server Operators local group is required to administer directory shares. Members of the Print Operators local group may administer print shares.
ADD SHARE/DIRECTORY
ADD SHARE/PRINT
MODIFY SHARE
SHOW SHARES
share-name
Specifies the name of the share to remove.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./SERVER=server-name
Specifies the name of the server from which to remove the share. The default is the server currently being administered.
LANDOFOZ\\TINMAN> REMOVE SHARE RAINBOW
Do you really want to remove share "RAINBOW" [YES or NO] (YES) : YES
%PWRK-S-SHAREREM, share "RAINBOW" removed from server "TINMAN"
|
This example removes the share named RAINBOW from the server currently being administered (TINMAN). A confirmation is required.
Removes the specified domain from the list of domains this domain trusts, or the list of domains that are allowed to trust this domain.Removing a trust relationship requires two steps on each of the two domains: one domain must stop trusting a second domain, and the second domain must stop permitting the first domain to trust it. Never remove a trust relationship by performing just one of the steps.
When removing a trust relationship, always administer both domains. Once a trust relationship is established, the password used to establish the trust is changed by the system. Because of this, you cannot remove one side of an established trust relationship, and then later reestablish that trust using the original password. You must always remove both sides of a trust relationship, and then completely reestablish it.
REMOVE TRUST trust-domain [/qualifiers]
Use of this command requires membership in the Administrators local group.
ADD TRUST
SHOW TRUSTS
trust-domain
Specifies the name of the domain for which to remove a trust relationship.
/CONFIRM
/NOCONFIRM
Controls whether you are prompted for a confirmation before the operation is performed. The default is /CONFIRM if running in interactive mode. When the prompt is issued, the default response is shown, and you may accept the default by pressing Return or Enter. If you type YES, TRUE, or 1, the operation is performed. If you type NO, FALSE, 0, or enter Ctrl/Z, no action is performed. If you type anything else, the prompt is repeated until you type an acceptable response. No prompt for confirmation is issued if running in batch mode./DOMAIN=domain-name
Specifies the name of the domain from which to remove the trust relationship. The default is the domain currently being administered. Do not specify both /DOMAIN and /SERVER on the same command line./PERMITTED
Specifies that the domain should be removed from the list of domains that are permitted to trust this domain. Be sure to administer the specified domain and remove this domain from its list of trusted domains. You must specify either the /PERMITTED or /TRUSTED qualifier, but not both./SERVER=server-name
Specifies the name of a server that is a member of the domain from which to remove the trust relationship. Do not specify the /SERVER qualifier with the /DOMAIN qualifier./TRUSTED
Specifies that the domain should be removed from the list of domains that this domain trusts. Be sure to administer the specified domain and remove this domain from its list of permitted-to-trust domains. You must specify either the /PERMITTED or /TRUSTED qualifier, but not both.
The following two examples together show how to remove a one-way trust relationship between the domain currently being administered (LANDOFOZ) and the domain called KANSAS. After this trust relationship has been removed, users in the KANSAS domain will no longer have access to resources in the LANDOFOZ domain.
| #1 |
|---|
LANDOFOZ\\TINMAN> REMOVE TRUST KANSAS/TRUSTED
Removing domain "KANSAS" from the Trusted Domains List will prevent
users in domain "KANSAS" from accessing resources in domain
"LANDOFOZ". If you choose to continue, you must also administer
domain "KANSAS" and remove "LANDOFOZ" from its list of Permitted
Domains.
Do you want to continue with the removal [YES or NO] (YES) : YES
%PWRK-S-TRUSTREM, trust between domains "LANDOFOZ" and "KANSAS"
removed
|
This example removes the domain KANSAS from the list of trusted domains on the domain currently being administered (LANDOFOZ). A confirmation is required.
| #2 |
|---|
LANDOFOZ\\TINMAN> REMOVE TRUST LANDOFOZ/DOMAIN=KANSAS/PERMITTED
Removing domain "LANDOFOZ" from the Permitted Domains List will
prevent users in domain "KANSAS" from accessing resources in domain
"LANDOFOZ". If you choose to continue, you must also administer
domain "LANDOFOZ" and remove "KANSAS" from its list of Trusted
Domains.
Do you want to continue with the removal [YES or NO] (YES) : YES
%PWRK-S-TRUSTREM, trust between domains "KANSAS" and "LANDOFOZ"
removed
|
This example removes the domain LANDOFOZ from the list of permitted-to-trust domains on the domain called KANSAS. This completes the removal of the trust relationship between domains LANDOFOZ and KANSAS initiated in the first example. A confirmation is required.
| Previous | Next | Contents | Index |