HP OpenVMS Systems Documentation

HP OpenVMS System Management Utilities Reference Manual

RESERVED_MEMORY EXTEND (Alpha and I64)

On Alpha and I64 systems, adds sections of memory if you want to specify more than one resource affinity domain (RAD) for a single reservation.
EXTEND does not allow you to specify any of the /ALLOCATE, /ZERO, or /PAGE_TABLES flags. The existing reservation determines the state of these flags. The /ALLOCATE flag is set implicitly with EXTEND, whether or not it was set for the initial reservation.
To add a memory section without specifying a RAD, use the /NORAD qualifier.
Refer to Section 21.4 for an example procedure that shows how to use SYSMAN RAD qualifiers and options.

Format

RESERVED_MEMORY EXTEND name

Parameter

name
Name of the memory reservation. You must specify a name.
If the reservation is for a memory resident global section, the name of the reservation must be the same as the global section name.

Qualifiers

/RAD=n

/NORAD
Specifies an additional memory section if you want to specify more than one RAD for a single reservation.
Use /NORAD to add a memory section without specifying a RAD.
/SIZE=size of reserved memory, in MBs
Specifies the number of megabytes to be deducted from the system's fluid page count for this memory-resident global section when the VMS$RESERVED_MEMORY.DATA data file is read during system initialization.

RESERVED_MEMORY FREE (Alpha and I64)

On a running Alpha or I64 system, frees reserved memory. This command does not affect the contents of the Reserved Memory Registry data file; it affects only the running system.

Format

RESERVED_MEMORY FREE name

Parameter

name
Name of the memory reservation. You must specify a name.

Qualifiers

/GLOBAL_SECTION (default)

/NOGLOBAL_SECTION
/NOGLOBAL_SECTION indicates that the memory qualifier is for a privileged application instead of a group or system global section. (/GLOBAL_SECTION indicates that the memory qualifier is for a group or system global section.) You cannot use /NOGLOBAL_SECTION with the qualifiers /GROUP, /SYSGBL, or /PAGE_TABLES.
/GROUP=n
You must specify /GROUP if the memory-resident global section is a group global section. Do not specify /GROUP if the memory-resident global section is a system global section. The value n is the UIC group number (in octal) associated with the memory-resident being freed.
You cannot use the /GROUP qualifier with either /SYSGBL or /NOGLOBAL_SECTION qualifiers.
/SYSGBL
Indicates that a reservation is for a system global, memory-resident section.
You cannot combine this qualifier with the /GROUP or /NOGLOBAL_SECTION qualifier. This qualifier is the default unless you specify /GROUP or /NOGLOBAL_SECTION.

Description

If physical pages were not preallocated during system initialization for this global section, the reserved memory is simply added to the system's fluid page count. Otherwise, the pages are deallocated to the system's free or zeroed page list.
If page tables are also reserved for the named memory-resident global section, the reserved memory for the shared page tables is also freed. If part of the named reservation is still used, the amount of reserved memory not currently in use is freed. The system displays an informational message that indicates if the named global section is using some portion of the reserved memory.

Example

SYSMAN> RESERVED_MEMORY FREE DFW$GS_2
%SMI-S-RMRFREPAG, pages successfully freed from reservation
SYSMAN> RESERVED_MEMORY SHOW
%SYSMAN-I-OUTPUT, command execution on node PIPERI
Name                     Pages  In Use Group    PTs  Alloced Zeroed
DFW$GS_3                  384        0 SYSGBL    No  No      No
DFW$GS_1                  128        0 00000100  No  No      No
DFW$GS_3                    1        0 SYSGBL   Yes  No      No

In this example, the first command frees reserved memory in DFW$GS_2. The second command displays reserved memory in the running system for DFW$GS_3 and DFW$GS_1, but not for DFW$GS_2, which has no reserved memory.

RESERVED_MEMORY LIST (Alpha and I64)

On Alpha and I64 systems, provides a preview of this reservation as it is currently stored in the Reserved Memory Registry data file. If no reservation is specified, all current reservations are displayed.
Use this qualifier to ensure that a reservation will be made as intended.
Refer to Section 21.4 for an example procedure that shows how to use SYSMAN resource affinity domain RAD qualifiers and options.

Format

RESERVED_MEMORY LIST name

Parameter

name
Name of the reservation you want to verify in the Reserved Memory Registry data file.

Qualifiers

/GLOBAL_SECTION (default)

/NOGLOBAL_SECTION
/NOGLOBAL_SECTION indicates that the memory qualifier is for a privileged application instead of a group or system global section. (/GLOBAL_SECTION indicates that the memory qualifier is for a group or system global section.) You cannot use /NOGLOBAL_SECTION with the qualifiers /GROUP, /SYSGBL, or /PAGE_TABLES.
/GROUP=n
You must specify /GROUP if the memory-resident global section is a group global section. Do not specify /GROUP if the memory-resident global section is a system global section. The value n is the UIC group number (in octal) associated with the memory-resident being freed.
You cannot use the /GROUP qualifier with either /SYSGBL or /NOGLOBAL_SECTION qualifiers.
/SYSGBL
Indicates that a reservation is for a system global, memory-resident section.
You cannot combine this qualifier with the /GROUP or /NOGLOBAL_SECTION qualifier. This qualifier is the default unless you specify /GROUP or /NOGLOBAL_SECTION.

RESERVED_MEMORY MODIFY (Alpha and I64)

On Alpha and I64 systems, allows you to modify an existing entry in the Reserved Memory Registry data file.
Refer to Section 21.4 for an example procedure that shows how to use SYSMAN RAD qualifiers and options.

Format

RESERVED_MEMORY MODIFY name

Parameter

name
Name associated with the entry being removed. You must specify a name.

Qualifiers

/ALLOCATE

/NOALLOCATE (default)
Allocates pages during the next reboot of the system as specified on the command line. (The default is taken from the existing Reserved Memory Registry entry.) The physical alignment of the pages is based on the maximum granularity hint factor that can be used to map the pages depending on the size of the reserved memory.
Possible granularity hint factors are 512 pages (or 4 MB) and 64 pages (or 512 KB). Therefore, assuming an 8-KB system page size, reserved memory is physically aligned as follows:

size >= 4 MB: physically aligned on a 4-MB boundary
size < 4 MB: physically aligned on a 512-KB boundary

If you specify /NOALLOCATE, or if you do not specify /ALLOCATE, memory is reserved only by reducing the system's fluid page count, but no specific pages are set aside.
/GLOBAL_SECTION (default)

/NOGLOBAL_SECTION
/NOGLOBAL_SECTION indicates that the memory qualifier is for a privileged application instead of a group or system global section. (/GLOBAL_SECTION indicates that the memory qualifier is for a group or system global section.) You cannot use /NOGLOBAL_SECTION with the qualifiers /GROUP, /SYSGBL, or /PAGE_TABLES.
/GROUP=n
Establishes that the reserved memory is for a group global section. The value n specifies the UIC group number (in octal) of the process that creates the group global section. Only processes within the creator's UIC group number are allowed access to the global section. For example, if a process with the UIC of [6,100] is the creator of the group global section, the group number for the /GROUP qualifier is 6.
You cannot use the /GROUP qualifier with either /SYSGBL or /NOGLOBAL_SECTION qualifiers.
/NEW_RAD=nn

/NONEW_RAD
Use NEW_RAD to change the RAD assignment for an entry. Do this by first specifying /RAD=n to identify the entry you want to change and then specify /NEW_RAD=nn to identify the new RAD. Use only /NEW_RAD=nn (without the /RAD qualifier) if the old entry did not have a RAD assigned.
/PAGE_TABLES (default)

/NOPAGE_TABLES
Reserves additional memory for shared page tables system as specified on the command line. (The default is taken from the existing Memory Registry.)
When the memory-resident global section is created, shared page tables are created for the global section. If you do not specify /ALLOCATE, or if you specify /NOALLOCATE, the additional reserved memory is deducted from the system's fluid page count. If you specify /ALLOCATE, additional pages are allocated for the shared page table during the next reboot of the system, and the additional reserved memory is deducted from the system's fluid page count.
If you do not specify /PAGE_TABLES, or if you specify /NOPAGE_TABLES, additional memory is not reserved for shared page tables. When the memory-resident global section is created, shared page tables are not created for the global section.
You cannot specify /PAGE_TABLES if the reservation has the attribute /NOGLOBAL_SECTION.
/RAD=n

/NORAD
MODIFY/RAD=n affects only the entry for the specified resource affinity domain (RAD). The value of n is the RAD you specify.
Usage Rules

Do not use MODIFY/RAD=n to change the size of a reservation for an entry without a specified number or to change the state of the /ZERO or /PAGE_TABLES flags. (Flags are always consistent for all entries in a given reservation.)
To change the RAD assignment for an entry, specify /RAD=n to identify the entry you want to change and /NEW_RAD=nn to identify the new RAD. Use only /NEW_RAD=nn (without the /RAD qualifier) if the old entry did not have a RAD assigned.
Use MODIFY name /NORAD if you no longer want to tie memory for this reservation to any specific RADs. SYSMAN compresses multiple entries into a single entry for an unspecified RAD with the total memory size as the sum of all RAD entries for this reservation.

/SIZE=size of reserved memory, in MBs
Specifies the number of megabytes to be deducted from the system's fluid page count for this memory-resident global section when the VMS$RESERVED_MEMORY.DATA data file is read during system initialization. The default value for /SIZE is taken from the existing Reserved Memory Registry.
/SYSGBL
Indicates that a reservation is for a system global memory resident section.
You cannot combine this qualifier with the /GROUP or /NOGLOBAL_SECTION qualifier. This qualifier is the default unless you specify /GROUP or /NOGLOBAL_SECTION.
/ZERO

/NOZERO (default)
/ZERO implies /ALLOCATE. If you specify /ZERO, preallocated pages are zeroed during system initialization. Zeroed pages are required for memory-resident global sections; however, the pages do not need to be zeroed during system initialization. The default value is taken from existing Reserved Memory Registry entry.
/NOALLOCATE implies /NOZERO because /ZERO is incompatible with /NOALLOCATE. If you do not specify /ZERO, or if you specify /NOZERO, preallocated pages are not zeroed during system initialization. Instead, these pages are zeroed when the global section is created.

Description

The Reserved Memory Registry entry to be modified is identified by the combination of the following items:
name
/[NO]GLOBAL_SECTION
/GROUP=n
/SYSGBL

The values of these qualifiers are the same as for the RESERVED_MEMORY ADD command.

Example

SYSMAN>  RESERVED_MEMORY MODIFY
X234567890123456789012345678901/SIZ=2/ZERO
$ TYPE SYS$SYSTEM:VMS$RESERVED_MEMORY.DATA
! VMS$RESERVED_MEMORY.DATA
! Do NOT edit this file
! Modify with SYSMAN RESERVED_MEMORY commands
! A = /ALLOCATE, Z = /ZERO, P = /PAGE_TABLES, VERSION = 1
! SIZE (MB) RESERVATION NAME                            GROUP  A Z P
1          X23456789012345678901234567890               1      0 0 1
2          X234567890123456789012345678901              SYSGBL 1 1 1
1          X2345678901234567890123456789012             NOGBL  0 0 0
SYSMAN> EXIT
$

The command in this example modifies an entry to reserve 2 MB of memory and to allocate and zero this memory at boot time.

RESERVED_MEMORY REMOVE (Alpha and I64)

On Alpha and I64 systems, removes a reserved memory entry from the Reserved Memory Registry data file. This command takes effect on the next reboot and does not affect the running systems.

Format

RESERVED_MEMORY REMOVE name

Parameter

name
Name associated with the entry being removed. You must specify a name.
If page tables are reserved for the named memory-resident global section, the additional reserved memory is also removed.

Qualifiers

/GLOBAL_SECTION (default)

/NOGLOBAL_SECTION
/NOGLOBAL_SECTION indicates that the memory qualifier is for a privileged application instead of a group or system global section. (/GLOBAL_SECTION indicates that the memory qualifier is for a group or system global section.) You cannot use /NOGLOBAL_SECTION with the qualifiers /GROUP, /SYSGBL, or /PAGE_TABLES.
/GROUP=n
You must specify /GROUP if the memory-resident global section is a group global section. Do not specify /GROUP if the memory-resident global section is a system global section. The value n is the UIC group number (in octal) associated with the memory-resident section being removed. You cannot use the /GROUP qualifier with either /SYSGBL or /NOGLOBAL_SECTION parameters.
/SYSGBL
Indicates that a reservation is for a system global memory resident section.
You cannot combine this qualifier with the /GROUP or /NOGLOBAL_SECTION qualifier. This qualifier is the default unless you specify /GROUP or /NOGLOBAL_SECTION.

Example


SYSMAN> RESERVED_MEMORY ADD DFW$GS1/SIZE=1 SYSMAN> RESERVED_MEMORY REMOVE DFW$GS1

The first command in this example adds DFW$GS1; the second command removes it.

RESERVED_MEMORY SHOW (Alpha and I64)

On Alpha and I64 systems, displays the memory reservations on the running system.
The display includes how much of the reserved memory is currently in use by the named global section. It also includes how much memory is reserved and currently in use for page tables, if any, and the blocks of physical pages reserved.

Format

RESERVED_MEMORY SHOW name

Parameter

name
Name associated with the entry being displayed within the running system. If you do not specify a name, the system displays the reserved memory for all registered global sections.

Qualifiers

/GLOBAL_SECTION (default)

/NOGLOBAL_SECTION
/NOGLOBAL_SECTION indicates that the memory qualifier is for a privileged application instead of a group or system global section. (/GLOBAL_SECTION indicates that the memory qualifier is for a group or system global section.) You cannot use /NOGLOBAL_SECTION with the qualifiers /GROUP, /SYSGBL, or /PAGE_TABLES.
/GROUP=n
You must specify /GROUP if the memory-resident global section is a group global section. Do not specify /GROUP if the memory-resident global section is a system global section. The value n is the UIC group number (in octal) associated with the memory-resident section being displayed. You can use the /GROUP qualifier only if you specify name. You cannot use the /GROUP qualifier with either /SYSGBL or /NOGLOBAL_SECTION parameters.
/SYSGBL
Indicates that a reservation is for a system global memory resident section.
You cannot combine this qualifier with the /GROUP or /NOGLOBAL_SECTION qualifier. This qualifier is the default unless you specify /GROUP or /NOGLOBAL_SECTION.

Example

SYSMAN> RESERVED_MEMORY SHOW
%SYSMAN-I-OUTPUT, command execution on node PIPER
Name                     Pages  In Use Group    PTs  Alloced Zeroed
DFW$GS_3                  384        0 SYSGBL    No  No      No
DFW$GS_2                  256        0 SYSGBL    No Yes     Yes
DFW$GS_1                  128        0 00000100  No  No      No
DFW$GS_3                    1        0 SYSGBL   Yes  No      No
DFW$GS_2                    1        0 SYSGBL   Yes Yes      No

The command in this example displays the memory reservations on a running system.

SET ENVIRONMENT

Defines the nodes or cluster to which subsequent commands apply.
Requires OPER or SETPRV privilege on all nodes in the target environment.

Format

SET ENVIRONMENT

Parameters

None.

Qualifiers

/CLUSTER
Specifies that all subsequent commands apply to all nodes in the cluster. By default, the management environment is the local cluster. Specify a nonlocal cluster by naming one cluster member with the /NODE qualifier.
/NODE=(node1,node2,...)
Specifies that SYSMAN execute subsequent commands on the given DECnet nodes. If accompanied by the /CLUSTER qualifier, the environment becomes the cluster where the given DECnet node is a member. A node name can be a system name, cluster alias, or logical name. However, before you can use logical names to define the command environment, you must set up the logical name table SYSMAN$NODE_TABLE. For more information about defining the SYSMAN logical name table, refer to the HP OpenVMS System Manager's Manual.
/USERNAME=username
Specifies that this user name should be used for access control purposes on another node. You can use this qualifier only in conjunction with the /CLUSTER or /NODE qualifiers. SYSMAN uses the current user name if none is supplied. SYSMAN prompts for a password whenever you specify a new user name.

Note
The account specified must have only a primary password. Accounts with secondary passwords are not supported.

Description

The SET ENVIRONMENT command defines the target nodes or cluster for subsequent commands. When invoked, the system management environment is the local node where you are running SYSMAN. You can change the environment to any other nodes in the cluster, the entire cluster, or any nodes or cluster available through DECnet.
Designate an OpenVMS Cluster environment with the /CLUSTER qualifier. When specifying a nonlocal cluster, also include the /NODE qualifier to identify the cluster.
If your environment consists of VAX, Alpha, and I64 nodes, see the DO command for information about creating logicals to manage each platform as an environment.
You can display the current environment with the command SHOW ENVIRONMENT. To adjust privileges and defaults for the current environment, use the SET PROFILE command.
An environment exists until you exit from SYSMAN or establish another command context with the SET ENVIRONMENT command.

Examples

#1
SYSMAN> SET ENVIRONMENT/CLUSTER %SYSMAN-I-ENV, Current command environment: Clusterwide on local cluster Username ALEXIS will be used on nonlocal nodes

This command defines the command environment as the local cluster. SYSMAN confirms the new environment.

#2
SYSMAN> SET ENVIRONMENT/NODE=NODE21/CLUSTER Remote Password: %SYSMAN-I-ENV, Current command environment: Clusterwide on remote node NODE21 Username ALEXIS will be used on nonlocal nodes

This command establishes a management environment on the cluster where NODE21 is a member. SYSMAN prompts for a password because it is a nonlocal environment.

#3
SYSMAN> SET ENVIRONMENT/NODE=(NODE21,NODE22,NODE23) %SYSMAN-I-ENV, Current command environment: Individual nodes: NODE21,NODE22,NODE23 Username ALEXIS will be used on nonlocal nodes

This command defines the management environment to be three individual nodes.

$ CREATE/NAME_TABLE/PARENT=LNM$SYSTEM_DIRECTORY -
_$ SYSMAN$NODE_TABLE
$ DEFINE LAVCS SYS1,SYS2,SYS3,SYS4/TABLE=SYSMAN$NODE_TABLE
$ RUN SYS$SYSTEM:SYSMAN
SYSMAN> SET ENVIRONMENT/NODE=(LAVCS)
%SYSMAN-I-ENV, Current command environment:
        Individual nodes: SYS1,SYS2,SYS3,SYS4
        Username ALEXIS   will be used on nonlocal nodes

The commands in this example set up the logical name table SYSMAN$NODE_TABLE, define a logical name (LAVCS), and use the logical name to define the command environment.

Contents

Index