This appendix briefly describes the configuration and management
tools that might be available on HP Integrity servers, and explains
how to set up the system console, configure boot options, boot the
OpenVMS I64 operating system, and shut down the operating system.
The appendix also includes brief troubleshooting procedures.
Specifically, this appendix contains the following information:
Hardware/firmware configuration and
management interfaces and their features
Setting up your system console
Overview of using the Extensible Firmware Interface
(EFI)
Enabling or disabling Hyper-Threading
on nPartitions that have dual-core processors that support it
Configuring and managing boot operations such as
the following:
NOTE: Any information about Integrity server hardware and
utilities is provided in this manual for your convenience and is
not intended to replace the hardware documentation included with your
Integrity server system or the latest documentation available on
the Web. HP Integrity servers are available in many different configurations.
Hardware, utilities, and certain hardware configuration procedures
might differ significantly across models, and even across versions
of the same model. Please see your hardware documentation for the
most up-to-date information specific to your particular model and
version. Note that the hardware documentation includes model-specific
illustrations to guide you. The latest version of documentation
for your server can be found online at: http://docs.hp.com/en/hw.html
