 |
HP OpenVMS Version 8.3 Upgrade and Installation Manual
Index
A- Accounts
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- ACPI configuration, Checking the ACPI Configuration for Booting OpenVMS in an nPartition
- Advanced Encryption Standard
(AES), Glossary
- Advanced Server for OpenVMS
- defined, Glossary
- AGEN$INCLUDE files
- returning to system disk, AGEN$INCLUDE Files
- AGEN$PARAMS.REPORT file
- examining, Running AUTOGEN to Tune the System
- aliases
- with hard links enabled, Installing OpenVMS Using Option 1 of the Operating System Menu
- Allocation class (ALLOCLASS parameter)
- for shadow sets, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- setting during installation, OpenVMS Cluster Information You Need, Joining an OpenVMS Cluster
- supplying during OpenVMS Cluster installation, Prompts for OpenVMS Cluster Configurations
- Alpha commands
- compared with Integrity server commands, – Alpha and Equivalent Integrity Server System Boot Commands
- Alpha computers
- boot behavior
- configuring, Configuring Boot Behavior for Alpha Systems, Setting and Showing Boot Devices
- boot device
- setting, Setting and Showing Boot Devices
- showing, Setting and Showing Boot Devices
- boot flag parameters
- setting, Setting Boot Flag Parameters
- booting
- automatic, Setting the System for Automatic Booting
- canceling boot device, Setting and Showing Boot Devices
- conversational, Performing a Conversational (Interactive) Boot
- emergency, Booting in an Emergency
- failure, If the System Does Not Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the System Disk
- with minimum startup, Booting with Minimum Startup
- with PMAD TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- firmware, Firmware on Alpha Systems
- halting, Halting the System
- shutting down, Shutting Down the System
- troubleshooting procedures, Detecting and Responding to System Problems
- ANALYZE/CRASH
command, Emergency Shutdown with Crash Commands
- ANALYZE/DISK_STRUCTURE command
- error message, Examining the System Disk
- using before an upgrade, Examining the System Disk
- APB.EXE
- and Writeboot utility, Writing a New Boot Block
- Architectures
- in OpenVMS Cluster, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
à - Archived
files
- deleting, Saving Archived Files
- saving, Saving Archived Files, Saving Archived Files
- Authorization
- files, Authorization Files
- network proxy, Creating Network Proxy Authorization Files
- returning to system disk, Returning Authorization and AGEN$INCLUDE Files to the System Disk
- AUTOGEN, Running AUTOGEN to Tune the System
- reboot after, Rebooting after AUTOGEN
- running after an installation or upgrade, Running AUTOGEN to Tune the System
- running at end of installation, Running AUTOGEN
- running at end of upgrade, What to Do After Shutdown
- tuning operating system, Running AUTOGEN to Tune the System
- Availability Manager
- configuring, Configuring the Availability Manager Base Software (Optional)
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrading, Upgrading Windowing, Networking, and Related Products
B- Backing up the system disk, Backing Up and Restoring the System Disk
- after customizing, Backing Up the Customized System Disk and Initiating Systematic Backups
- after installation or upgrade, Backing Up Your System Disk
- before upgrade, Backing Up the System Disk
- from OpenVMS main menu, Using the Operating System Menu
- in a shadow set, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- without booting the OpenVMS CD or DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Backspace key, Using the Delete or Backspace Key with Integrity Server Utilities
- BACKUP command, Reasons for Backing Up the System Disk
- caution, OpenVMS Cluster Caution
- BAP system parameters
- tuning, Tuning BAP System Parameters (Alpha Upgrade Only)
 - Baseboard Management Controller
- (see BMC (Baseboard Management Controller))
- Batch queue
- creating, Setting Up the Queue Manager and Default Queues
- BIB (boot-is-blocked state), Booting OpenVMS I64 on an nPartition, Orderly Shutdown, If the System Does Not Boot
- defined, Glossary
- BMC (Baseboard Management Controller)
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity Servers
- system event log (SEL), Booting Operations
- Boot
- defined, Glossary
- Boot block, writing, Writing a New Boot Block, Writing a New Boot Block
- Boot command
- Alpha and Integrity server equivalents, Alpha and Equivalent Integrity Server System Boot Commands
- qualifiers for XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
- Boot device list, General Notes About Using EFI
- Boot device paths
- configuring on FC, Configuring and Booting FC Boot Device
- Boot
flags, Setting and Showing Boot Devices, Adding a Boot Option and Setting Boot Flags
- Boot
options
- boot devices, Setting and Showing Boot Devices, Setting Boot Options for Your System Disk
- changing EFI boot timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- displaying, Setting the System for Automatic Booting, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- during upgrade, Upgrade Creates and Validates Boot Options (I64 Only)
- setting, Configuring Boot Behavior for Alpha g
Systems, Setting Boot Options for Your System Disk
- setting during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting during upgrade, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
- Boot server
- configuration for InfoServer, Setting Up the BOOTP Boot Server (I64 Only)
- defined, Glossary
- Booting
- automatic, Setting the System for Automatic Booting, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- canceling boot device, Setting and Showing Boot Devices
- cell-based servers, Overview of Booting on a Cell-Based Server
- conversational, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- emergency, Booting in an Emergency, Emergency Booting
- with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the user authorization file, Booting Without the User Authorization File, Booting Without a User Authorization File
- failure, If the System Does Not Boot, If the System Does Not Boot
- Fibre Channel storage devices, Setting Up and Booting Fibre Channel Storage Devices
- from a different root, Booting from a Different Root Directory, Booting from a Different Root Directory
- from InfoServer, Booting from the InfoServer, Booting from the InfoServer utility, Booting from the InfoServer, Booting from the InfoServer Utility, Booting from the InfoServer, Booting from the InfoServer
- from local drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive
- frrom local drive, Booting from the Local
Drive
- manually, Booting Manually from the System Disk, Booting Manually from the Local System Disk
- OpenVMS Alpha operating system CD, Booting the OpenVMS Alpha Operating System CD
- OpenVMS I64 OE DVD, Booting the OpenVMS I64 OE DVD from the Local Drive
- operating system kit, Booting the OpenVMS Alpha CD, Booting the OpenVMS I64 OE DVD
- for upgrade, Booting the OpenVMS Alpha Operating System CD, Booting the OpenVMS I64 Operating System DVD
- problems, Booting with Default System Parameters, Booting with Default System Parameters
- satellite, Adding the Network Boot Option to the EFI Boot Manager
- setting boot device, Setting and Showing Boot Devices
- setting boot flag parameters, Setting Boot Flag Parameters, Adding a Boot Option and Setting Boot Flags
- showing boot device, Setting and Showing Boot Devices
- with alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
- with PMAD TURBOchannel, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
- Bootstrap
- defined, Glossary
- Bugcheck, Detecting and Responding to System Problems, Detecting and Responding to System Problems
C- CDSA
- defined, Glossary
- initializing, Initializing CDSA (Optional)
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- new feature, New with OpenVMS Version 8.3
- upgrading, Upgrading Windowing, Networking, è
and Related Products
- Cell
- defined, Glossary
- Cell boot phase, Booting the nPartition Hardware
- Cell-based
servers
- (see also nPartition)
- , Configuration and Management Utilities on Cell-Based Servers
- (see also nPartition)
- booting, Overview of Booting on a Cell-Based Server
- defined, Glossary
- EFI, General Notes About Using EFI
- terminology, Cell-Based Server Terminology
- utilities, Configuration and Management Utilities on Cell-Based Servers
- Checklist
- installation, Installation Tasks
- postinstallation and postupgrade, Postinstallation and Postupgrade Tasks
- preinstallation for OpenVMS Cluster, Preinstallation Tasks for OpenVMS Cluster Environments
- preupgrade, Preupgrade Tasks
- preupgrade for OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
- upgrade, Upgrade Tasks
- CI-only OpenVMS Cluster
- defined, Glossary
- Cluster
- (see OpenVMS Cluster)
- Cluster
size (disk volume), Changing the Disk Volume Cluster Size
- Command procedures
- checking after upgrade, Examining Your Command Procedures (Upgrades Only)
- site-specific, Examining Your Command Procedures (Upgrades Only)
- Computer interconnect (CI)
- defined, Glossary
- Concurrent upgrades
- defined, Glossary
- description, Concurrent Upgrade
- preparing system for, Preparing Your System for a Concurrent Upgrade
- tasks after shutdown, What to Do After Shutdown
- Configuration
options
- during upgrade, Selecting Reinstallation and Reconfiguration Options
- Console (Integrity servers)
- configuring, Selecting Your OpenVMS Console for the Integrity Server System
- delete or backspace key, Using the Delete or Backspace Key with Integrity Server Utilities
- interface, Configuration and Management Utilities for HP Integrity Servers
- MP, Selecting Your OpenVMS Console for the Integrity Server System
- MP interface, Selecting Your OpenVMS Console for the Integrity Server System
- options, Overview of Utilities and Console Options
- system serial port, Selecting Your OpenVMS Console for the Integrity Server System
- Console firmware, Firmware on Alpha Systems, Firmware on Integrity Server Systems
- CONTINUE command, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- Core
- defined, Glossary
- Core I/O
- defined, Glossary
- ¹
Crash commands, Emergency Shutdown with Crash Commands
- Customizing the system, Customizing the System (New Installations, Some Upgrades)
D- DCL option
(from OpenVMS main menu), Using the Execute DCL Option (8)
- Debug devices
- configuring, Overview of Using EFI
- DEC 3000 Alpha computers
- booting
- over the network, Booting over the Network with an Alternate TURBOchannel Adapter
- with alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- DECamds
- check for valid versions for system upgrade, Software That Must Be Manually Removed
- DECevent
- reinstall after upgrade, Reinstall DECevent Software (Upgrades only; optional)
- decipher, Glossary
- DECnet
- declaring during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- node address, OpenVMS Cluster Information You Need
- providing during installation, Prompts for OpenVMS Cluster Configurations
- node name, OpenVMS Cluster Information You Need
- possible values, Prompts for OpenVMS Cluster Configurations
- providing during installation, Prompts for OpenVMS Cluster Configurations
- DECnet Phase IV
- configuring, Configuring DECnet
- defined, Glossary
- ignoring during startup, Configuring DECnet
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- registering license after installation, Registering Your Licenses
- running with DECwindows, Configuring DECnet
- upgrading, Upgrading Windowing, Networking, and Related Products
- DECnet-Plus
- configuring, Configuring DECnet
- defined, Glossary 9
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- upgrading, Upgrading Windowing, Networking, and Related Products
- DECnet/OSI
- (see DECnet-Plus)
- DECram
- checking for valid versions for system upgrade, Software That Must Be Manually Removed
- DCL command DECRAM, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- in system upgrade, Remove Older Versions of DECram for OpenVMS (Alpha Only)
- DECRYPT command, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- decryption
- defined, Glossary
- DECwindows Motif
- client files, Upgrading Windowing, Networking, and Related Products
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- new feature, New with OpenVMS Version 8.3
- upgrading, Upgrading Windowing, Networking, and Related Products
- Delete key (Integrity server
utilities), Using the Delete or Backspace Key with Integrity Server Utilities
- Device name
- conventions, Device-Naming Conventions
- defined, Glossary
- Diagnostic partition, Alternative Ways to Initialize the System Disk
- defined, Glossary
- removing, Removing the Diagnostic Partition File (I64 Only)
- Disk server
- defined, Glossary
- Disk space
- amount needed for upgrade, Checking the Size of the System Disk
- amount needed to decompress system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- DSSI-only OpenVMS Cluster
- defined, Glossary
- Dump file
- checking size, System File Sizes '
- modifying size, Running AUTOGEN to Tune the System
- Dump Off the System Disk (DOSD)
- configuring, Overview of Using EFI
- DWMOTIF_SUPPORT, New with OpenVMS Version 8.3, Upgrading Windowing, Networking, and Related Products
E- EFI (Extensible Firmware Interface), Integrity Server Tools
- adding boot options, Setting Boot Options for Your System Disk
- boot path settings
- storing and restoring, Saving and Restoring EFI Settings
- changing boot option timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity Servers
- displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- on nPartition, General Notes About Using EFI
- using, Overview of Using EFI
- EFI Boot Manager, Overview of Utilities and Console Options
- (see also OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM)
utility)
- , Overview of Utilities and Console Options
- (see also OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM)
utility)
- adding boot options to
- manually, Using EFI to Set Automatic Booting of Your System Disk
- using OpenVMS I64 Boot Manager utility, Setting Boot Options for Your System Disk
- setting boot behavior, Configuring and Managing OpenVMS Booting on Integrity Servers
- setting timeout, Setting EFI Boot Option Countdown Timer (Timeout)
- EFI Utilities for OpenVMS (I64)
- documentation, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- entering commands, Differences Between OpenVMS I64 and Alpha Installations, General Notes About Using EFI
- vms_bcfg, Using EFI to Set Automatic Booting of Your System Disk
- vms_set command, Alpha and Equivalent Integrity Server System Boot Commands
- vms_show command, Displaying EFI Boot Entries and Mapped OpenVMS Devices, Alpha and Equivalent Integrity Server System Boot Commands
- EFI$BCFG
- (see OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM)
utility)
- Emergency system startup, Booting in an Emergency, Emergency Booting
- with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
- encipher, Glossary
- ENCRYPT command, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
- encryption
- defined, Glossary
- Encryption for OpenVMS, Glossary
- Enterprise Operating Environment
(EOE)
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
- EOE
- (see Enterprise Operating Environment (EOE))
- Errors
- cluster hang during ápreupgrade shutdown, Preparing Your System for a Rolling Upgrade
- running ANALYZE/DISK_STRUCTURE, Examining the System Disk
- troubleshooting system problems, If the System Does Not Boot, If the System Does Not Boot
- Extensible Firmware
Interface
- (see EFI (Extensible Firmware Interface))
F- FEEDBACK.DAT
file, Ensuring You Have a Recent FEEDBACK.DAT File
- Fibre Channel
- configuring and booting, Setting Up and Booting Fibre Channel Storage Devices
- configuring for booting, Overview of Using EFI, Setting Boot Options for Your System Disk, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- in cluster, Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
- configuring for dumping, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- displaying device information, Viewing the FC Configuration from the Console, Setting Up FC Disks for Booting and Dumping, Checking the Firmware Version
- firmware, Viewing the FC Configuration from the Console, Checking the Firmware Version, Obtaining the IPF Offline Diagnostics and Utilities
- newly installed disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- newly upgraded system disk, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
- SAN storage array graphic, Fibre Channel Host and SAN Storage Controller Configuration
- system disk booting, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
- system disk identification, Installing OpenVMS Using Option 1 of the Operating System Menu
- FIELD account
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- Files
- restoring on the system disk, Using the Operating System Menu
- Firmware
- revision checking, Firmware on Alpha Systems, Firmware on Integrity Server Systems, Checking Firmware Version
- updating, Firmware on Alpha Systems, Firmware on Integrity Server Systems
- FOE
- (see Foundation Operating Environment (FOE))
- Foundation Operating Environment
(FOE)
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
H- Halting the system, Halting the System, Halting the Integrity Server to Recover from Hangs and Crashes
- Hard links
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- Hardware
- components
- preinstallation, Hardware Components
- documentation
- Integrity servers, Getting to Know Your Integrity Server, Configuring OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
- problems, diagnosing, For Hardware Problems
- Integrity servers, If the System Does Not Boot
- HRS (Human Recognition Service
Standard)
- defined, Glossary
- HSx device
- defined, Key Terms, Glossary
- specifying, Specifying the Default Boot Device on Alpha Systems
- HSx drive
- defined, Glossary
- Hyper-Threading, New with OpenVMS Version 8.3
- defined, Glossary
- enabling and disabling, Enabling or Disabling Hyper-Threading on Dual-Core Processors
- saving or restoring state of, Saving and Restoring EFI Settings
I- iLO (Integrated Lights-Out), Integrity Server Tools, Configuration and Management Utilities for HP Integrity Servers
- InfoServer
- booting, Booting from the InfoServer, Booting from the InfoServer, Booting from the InfoServer, Booting from the InfoServer
- client configuration, Setting Up Your System as an InfoServer Client (I64 Only)
- defined, Key Terms, Glossary
- LAN devices supported, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
- losing connection, Booting from the InfoServer, Booting from the InfoServer
- during installation, Booting from the InfoServer
- during upgrade, Booting from the InfoServer
- software application
- boot server configuration, Setting Up the BOOTP Boot Server (I64 Only)
- booting OpenVMS, Booting from the InfoServer
- configuration, Setting Up and Performing Network Booting
- server configuration, Setting Up the InfoServer Server
- troubleshooting, Troubleshooting InfoServer Boot Problems
- INITIALIZE
- command, Setting the System for Automatic Booting
- option
- alternative use of, Alternative Ways to Initialize the System Disk
- on OpenVMS main menu, INITIALIZE Option, Installing OpenVMS Using Option 1 of the Operating System Menu
- Installable
products
- displaying, Using the Display Layered Products Option (2)
- Installation
- (see also Preinstallation tasks, Postinstallation
tasks)
- , After Installing or Upgrading the OpenVMS Operating System
- (see also Preinstallation tasks, Postinstallation
tasks)
- and AUTOGEN, Running AUTOGEN
- booting
- new system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Booting the New OpenVMS System Disk
- operating system kit, Booting the OpenVMS Operating System Media
- checklist, Installation Tasks
- completing the procedure, Installing OpenVMS Using Option 1 of the Operating System Menu
- component options, list of, Installing OpenVMS Using Option 1 of the Operating System Menu
- differences between OpenVMS Alpha and I64, Differences Between OpenVMS I64 and Alpha Installations
- help text, Installing OpenVMS Using Option 1 of the Operating System Menu
- information needed for OpenVMS Cluster, Preparing to Install in an OpenVMS Cluster Environment
- layered products, Installing OpenVMS Using Option 1 of the Operating System Menu
- after installation or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- license registration, Installing OpenVMS Using Option 1 of the Operating System Menu
- on target disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- OpenVMS Debugger clients, Installing OpenVMS Debugger Clients on a PC (Optional)
- PCSI, Using the Operating System Menu
- procedure, Installing OpenVMS Using Option 1 of the Operating System Menu
- prompts, Responding to Prompts During the Installation
- rebooting system, Rebooting after AUTOGEN
- recording, Hardware Components
- selecting component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting passwords, Installing OpenVMS Using Option 1 of the Operating System Menu
- specifying OpenVMS Cluster configuration, Joining an OpenVMS Cluster
- stages of, Installation Tasks
- system information, providing, Installing OpenVMS Using Option 1 of the Operating System Menu
- third-party networking software, Installing and Configuring Third-Party Networking Software
- windowing and networking products, Installing OpenVMS Using Option 1 of the Operating System Menu
- Installed
products
- displaying, Using the Show Installed Products Option (4)
- removing, Using the Remove Installed Products Option (6)
- Instant Capacity (iCAP)
- and removal of the operating system from system disk, Removing the OpenVMS Operating System
- and system disk initialization, INITIALIZE Option
- configuring, Configure the Instant Capacity Software (Optional; I64 only)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- Integrated
Lights-Out
- (see iLO (Integrated Lights-Out))
- Integrity servers
- boot behavior
- configuring, Configuring and Managing OpenVMS Booting on Integrity Servers
- boot device
¯
- setting, Configuring and Managing OpenVMS Booting on Integrity Servers, Setting Boot Options for Your System Disk
- showing, Configuring and Managing OpenVMS Booting on Integrity Servers, Setting Boot Options for Your System Disk
- boot flag parameters
- setting, Adding a Boot Option and Setting Boot Flags
- boot options, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Upgrade Creates and Validates Boot Options (I64 Only)
- EFI boot menu, Overview of Using EFI
- managing, Configuring and Managing OpenVMS Booting on Integrity Servers
- OpenVMS I64 installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- booting
- automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- conversational, Performing a Conversational (Interactive) Boot
- emergency, Emergency Booting
- failure, If the System Does Not Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the Local System Disk
- with minimum startup, Booting with Minimum Startup
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- commands
- and equivalent Alpha commands, Alpha and Equivalent Integrity Server System Boot Commands
- console configuration, Selecting Your OpenVMS Console for the Integrity Server System
- documentation, Getting to Know Your Integrity Server, Configuring OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
- firmware, Firmware on Integrity Server Systems
- getting started, Getting Started: Main Steps After You Unpack Your Integrity Server
- halting, Halting the Integrity Server to Recover from Hangs and Crashes
- hangs or crashes, Halt and Shutdown Procedures
- OE DVD, OpenVMS for Integrity Servers Operating Environment (OE) DVD
- booting, Booting the OpenVMS I64 OE DVD from the Local Drive
- overview, Getting to Know Your Integrity Server
- setting up and booting, Getting Started: Main Steps After You Unpack Your Integrity Server, Configuring ]OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
- shutting down, Shutting Down the System
- system event log (SEL), Booting Operations
- troubleshooting procedures, Detecting and Responding to System Problems
- utilities and console options, Configuration and Management Utilities for HP Integrity Servers
- Internationalization (VMSI18N) data kit
- installation, Installing the OpenVMS Internationalization Data Kit
- Interrupt Priority C (IPC), Preparing Your System for a Rolling Upgrade
- IPF Offline Diagnostics and Utilities CD, Obtaining the IPF Offline Diagnostics and Utilities
L- LAN devices
- InfoServer support, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
- Layered products
- defined, Glossary
- installing
- after OpenVMS installation or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- alternative procedure, Alternative Procedure
- during OpenVMS installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during OpenVMS upgrade, Shutting Down the System
- installing or upgrading independently of system, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- registering, Using the Install or Upgrade Layered Products Option (3)
- Secure Delivery, New with OpenVMS Version 8.3, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS I64 and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- system upgrade effect on, Licenses and Layered Products
- LIBDECOMP.COM, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- Libraries
- compressing and decompressing, Running AUTOGEN
- expanding, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- License Management utility
- using, Registering Your Licenses
- Licenses, Installing OpenVMS Using Option 1 of the Operating System Menu
- registering
- after installation or upgrade, Registering Your Licenses
- update requirements for system upgrade, Update License Requirements
- upgrade effect on layered products, Licenses and Layered Products
- Local area OpenVMS Cluster
- defined, Glossary
- Local drive
- defined, Key Terms, Glossary
- Log
- for installation, Hardware Components
- Logging in
- problems due to forgotten password, Booting Without the User Authorization File, Booting Without a User Authorization File
- problems due to login procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- problems due to startup procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- logical CPU
- defined, Glossary
- Logical
names
- UAFALTERNATE, Booting Without the User Authorization File, Booting Without a User Authorization File
- Login command procedures
- booting without, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- Login welcome message
- defining, Creating a System-Specific Login Welcome Message (Optional)
M- Magnetic media
- defined, Key Terms
- Maintenance Operations Protocol
(MOP)
- defined, Glossary
- Management Processor (MP)
- co command, Selecting Your OpenVMS Console for the Integrity Server System
- defined, Glossary
- description, Configuration and Management Utilities for HP Integrity Servers
- setting as console interface, Selecting Your OpenVMS Console for the Integrity Server System
- MCOE
- (see Mission Critical Operating Environment (EOE))
- Media
- defined, Glossary
- Migration
support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- Minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
- Mission Critical Operating Environment
(MCOE)
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
- Mixed-architecture OpenVMS Cluster
systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Notes and Restrictions
- OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
- Mixed-version OpenVMS Cluster systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Preparing Your System for a Rolling Upgrade
- MODPARAMS.DAT parameter file
- modifying after installation or upgrade, Modifying System Parameters
- modifying after upgrade, Modifying System Parameters After an Upgrade
- modifying before upgrade, Verifying System Parameters
- modifying for cluster, OpenVMS Cluster Parameters
- MOP server
- defined, Glossary
- MP
- (see Management Processor (MP))
- Multihead system
- configuring, Configuring a Multihead System (Optional)
N- NETCONFIG.COM
procedure
- running, Configuring DECnet
- Network booting
- InfoServer, Setting Up and Performing Network Booting
- Network proxy authorization files
- creating, u Creating Network Proxy Authorization Files
- Networking products
- (see also TCP/IP Services for OpenVMS, DECnet,
DECnet Phase IV, DECnet-Plus)
- , Installing and Configuring Third-Party Networking Software
- (see also TCP/IP Services for OpenVMS, DECnet,
DECnet Phase IV, DECnet-Plus)
- configuring, Configuring DECnet
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- third-party
- installing, Installing and Configuring Third-Party Networking Software
- upgrading, Upgrading Windowing, Networking, and Related Products
- nPartition
- (see also Cell-based servers)
- , Configuration and Management Utilities on Cell-Based Servers
- (see also Cell-based servers)
- ACPI configuration, Checking the ACPI Configuration for Booting OpenVMS in an nPartition
- BIB (boot-is-blocked state), Booting OpenVMS I64 on an nPartition, Orderly Shutdown, If the System Does Not Boot
- boot phase, Booting the nPartition Hardware
- defined, Glossary
- hardware booting, Booting the nPartition Hardware
- reboot for reconfiguration, Orderly Shutdown
- shutdown for reconfiguration, Orderly Shutdown
- software booting, Booting OpenVMS I64 on an nPartition
O- ODS-2
- selecting on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- selecting on upgrade, Specifying the On-Disk Structure Level
- ODS-5
- selecting on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- selecting on upgrade, Specifying the On-Disk Structure Level
- OE
- (see Operating Environment (OE))
-
On-Disk Structure
Level
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE
- OpenVMS Alpha
- boot behavior
- configuring, Setting and Showing Boot Devices
- boot flags, Setting Boot Flag Parameters
- booting
- automatic, Setting the System for Automatic Booting
- conversational, Performing a Conversational (Interactive) Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the System Disk
- with minimum startup, Booting with Minimum Startup
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- firmware, Firmware on Alpha Systems
- layered products
- installing, Alternative Procedure
- operating system CD, OpenVMS Alpha Operating System CD
- booting, Booting the OpenVMS Alpha Operating System CD
- shutting down, Shutting Down the System
- OpenVMS Cluster
- and OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
- BACKUP caution, OpenVMS Cluster Caution
- becoming a member
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Setting OpenVMS Cluster Membership Information
- preupgrade requirements, Adding a New System to an OpenVMS Cluster
- configuring
- after installation, Installing OpenVMS Using Option 1 of the Operating System Menu, Joining an OpenVMS Cluster
- during installation, Joining an OpenVMS Cluster
- defined, Glossary
- EXPECTED_VOTES parameter, OpenVMS Cluster Parameters
- group number
- rules for creating, Preparing to Install in an OpenVMS Cluster Environment
- information required for Ò OpenVMS installation, Preparing to Install in an OpenVMS Cluster Environment
- installation
- prompts, Joining an OpenVMS Cluster
- supplying ALLOCLASS parameter, Prompts for OpenVMS Cluster Configurations
- installing, Joining an OpenVMS Cluster
- installing TDC_RT, Installation in OpenVMS Clusters
- label for system disk, Suggested Procedures
- local area, Glossary
- migration support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- mixed-version support, Mixed-Version Support in an OpenVMS Cluster Environment
- parameters
- after upgrade, OpenVMS Cluster Parameters
- password
- rules for creating, Preparing to Install in an OpenVMS Cluster Environment
- quorum
- adjusting using Availability Manager or DECamds, Preparing Your System for a Rolling Upgrade
- adjusting using IPC, Preparing Your System for a Rolling Upgrade
- maintaining during rolling upgrades, Preparing Your System for a Rolling Upgrade
- rebooting members, Rebooting Cluster Members (Upgrades Only)
- upgrade
- concurrent, Concurrent Upgrade
- preparing for, Preparing to Upgrade in an OpenVMS Cluster Environment, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
- rolling, Rolling Upgrade, Notes and Restrictions
- setting membership information, Setting OpenVMS Cluster Membership Information
- tasks after shutdown, What to Do After Shutdown
- types of, Types of Upgrades
- warranted support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- OpenVMS Debugger
- installing clients on a PC, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Galaxy
- creating an instance, Installing OpenVMS Using Option 1 of the Operating System Menu, ’
Setting OpenVMS Galaxy Information (Alpha Only)
- OpenVMS I64
- boot behavior
- configuring, Setting Boot Options for Your System Disk
- boot flags, Adding a Boot Option and Setting Boot Flags
- booting
- automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
- conversational, Performing a Conversational (Interactive) Boot
- from a different root, Booting from a Different Root Directory
- manually, Booting Manually from the Local System Disk
- with minimum startup, Booting with Minimum Startup
- with XDELTA, Booting with the XDelta Utility (XDELTA)
- component options, Installing OpenVMS Using Option 1 of the Operating System Menu
- firmware, Firmware on Integrity Server Systems
- layered products
- installing, Alternative Procedure
- OE DVD, OpenVMS for Integrity Servers Operating Environment (OE) DVD
- booting, Booting the OpenVMS I64 OE DVD from the Local Drive
- shutting down, Shutting Down the System
- OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM)
utility, Configuring and Managing OpenVMS Booting on Integrity Servers
- (see also EFI Boot Manager)
- , Overview of Utilities and Console Options, Configuring and Managing OpenVMS Booting on Integrity Servers
- (see also EFI Boot Manager)
- adding boot entry for system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Setting Boot Options for Your System Disk
- changing EFI boot timeout value, Setting EFI Boot Option Countdown Timer (Timeout)
- displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- overview, Overview of Using EFI
- OpenVMS instance
- defined, Glossary
- OpenVMS internationalization (VMSI18N)
data kit
- installation, Installing the OpenVMS Internationalization Data Kit
- OpenVMS Management Station
- ¸
- defined, Glossary
- defining TCP/IP nodes, Defining TCP/IP Nodes
- disk quotas, Enabling Disk Quotas
- error log, Error Log Information
- getting started, Getting Started with OpenVMS Management Station
- preparing the PC, Preparing Your PC
- preparing to use, Preparing to Use OpenVMS Management Station
- problem reporting, Determining and Reporting Problems
- removing, Removing OpenVMS Management Station
- server
- removing, Removing the OpenVMS Management Station Server
- system files, Editing the System Files
- uninstalling V2.1 client, Removing Version 2.1 of the OpenVMS Management Station Client
- Operating
Environment (OE)
- DVD
- defined, Glossary
- for OpenVMS
- defined, Glossary
- licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
- options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
- Operating system
- CD
- defined, Glossary
- files
- removing, Removing the OpenVMS Operating System
- media
- defined, Key Terms, Glossary
- Operating system kit
- booting for installation, Booting the OpenVMS Operating System Media, Booting the OpenVMS Alpha CD, Booting the OpenVMS I64 OE DVD
- booting for upgrade, Booting the Operating System Media, Booting the OpenVMS Alpha Operating System CD, Booting the OpenVMS I64 Operating System DVD
- Output
- saving from installation, Hardware Components
P- Page file
- checking size, System File Sizes
- modifying size, Running AUTOGEN to Tune the System
- PAK
- (see Product Authorization Key (PAK))
- Partition
- defined, Glossary
- Partition Manager, Cell-Based Server Terminology, Configuration and Management Utilities on Cell-Based Servers
- Password
- forgotten, Logging In from a Character-Cell Terminal, Booting Without the User Authorization File, Booting Without a User Authorization File
- minimum length, Installing OpenVMS Using Option 1 of the Operating System Menu
- setting during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- Patches
- finding, installing, removing
- using distribution media menu option, Using the Patches and Recovery Data Option (7)
- installing from download, Installing Patches (Optional but Recommended)
- required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- Secure Delivery, Installing Patches (Optional but Recommended)
- PATHWORKS for OpenVMS (Advanced
Server)
- defined, Glossary
- Pay per use (PPU)
0- configuring, Configure the Pay per use Software (Optional; I64 only)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- PCSI
- and recovery data, Checking for Recovery Data
- installing layered products independently, Alternative Procedure
- installing patches
- using FTP, Installing Patches (Optional but Recommended)
- installing the operating system, Using the Operating System Menu
- upgrading the operating system, Using the Operating System Menu
- Performance Data Collector (TDC)
- defined, Glossary
- Performance Data Collector base software
(TDC_RT)
- compatibility with prior releases, Compatibility with Prior Releases
- defined, Glossary
- initializing and running, Initializing and Running the Performance Data Collector Base Software (Optional)
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- in OpenVMS Clusters, Installation in OpenVMS Clusters
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- running the software, Running TDC_RT
- startup file, Startup File
- upgrading, Upgrading Windowing, Networking, and Related Products
- user privileges and quotas, User Privileges and Quotas
- Platform
- defined, Glossary
- PMAD TURBOchannel adapter
- booting system, Booting over the Network with an Alternate TURBOchannel Adapter
- PMAZB TURBOchannel adapter
- booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- PMAZC TURBOchannel adapter
- booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- POLYCENTER Software
Installation utility
- (see PCSI)
- POSSE (Pre-OS System Environment)
- defined, Glossary
- HP implementation of EFI, Overview of Utilities and Console Options
- Postinstallation
tasks
- accounts, Creating Accounts (New Installations, Some Upgrades)
- AUTOGEN
- to set system parameter changes, Running AUTOGEN to Set System Parameter Changes
- tuning the system, Running AUTOGEN to Tune the System
- Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
- backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
- BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
- CDSA initialization, Initializing CDSA (Optional)
- checklist, Postinstallation and Postupgrade Tasks
- customizing the system, Customizing the System (New Installations, Some Upgrades)
- DECnet configuration, Configuring DECnet
- iCAP configuration, Configure the Instant Capacity Software (Optional; I64 only)
- Kerberos configuration, Configuring Kerberos (Optional)
- layered products, Installing and Configuring >Layered Products (New Installations, Some Upgrades)
- license registration, Registering Your Licenses
- login welcome message, Creating a System-Specific Login Welcome Message (Optional)
- MODPARAMS.DAT file, Modifying System Parameters
- multihead system configuration, Configuring a Multihead System (Optional)
- network proxy authorization files, Creating Network Proxy Authorization Files
- OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
- patches, Installing Patches (Optional but Recommended)
- PPU configuration, Configure the Pay per use Software (Optional; I64 only)
- print queues, Creating Print Queues (New Installations, Some Upgrades)
- queue manager and default queues, Setting Up the Queue Manager and Default Queues
- shadow sets
- system parameters, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- shadow sets, forming, Forming the Shadow Set
- SSL configuration, Configuring SSL for OpenVMS
- SYSTARTUP_VMS.COM procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- system files, Adding and Removing Operating System Files (Optional)
- system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
- TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
- testing the system, Testing the System with UETP (Optional)
- third-party networking software configuration, Installing and Configuring Third-Party Networking Software
- tuning the system, Running AUTOGEN to Tune the System
- Postupgrade tasks
- accounts, Creating Accounts (New Installations, Some Upgrades)
- AUTOGEN
- to set system parameter changes, Running AUTOGEN to Set System Parameter Changes
- turning the system, Running AUTOGEN to Tune the System
- Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
- backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
- BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
- CDSA initialization, Initializing CDSA (Optional)
- cluster members, Rebooting Cluster Members (Upgrades Only)
- command procedure templates, Examining Your Command Procedures (Upgrades Only)
- customizing the system, Customizing the System (New Installations, Some Upgrades)
- DECnet configuration, Configuring DECnet
- dump file size, Running AUTOGEN to Tune the System
- iCAP configuration, Configure the Instant Capacity Software (Optional; I64 only)
- Kerberos configuration, Configuring Kerberos (Optional)
- layered products, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- license registration, Registering Your Licenses
- login welcome message, Creating a System-Specific Login Welcome Message (Optional)
- MODPARAMS.DAT file, Modifying System Parameters, Modifying System Parameters After an Upgrade
- multihead system configuration, Configuring a Multihead System (Optional)
- network proxy authorization files, Creating Network Proxy Authorization Files
- OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
- OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
- page file size, Running AUTOGEN to Tune the System
- patches, Installing Patches (Optional but Recommended)
- PPU configuration, Configure the Pay per use Software (Optional; I64 only)
- print queues, Creating Print Queues (New Installations, Some Upgrades)
- queue manager and default queues, Setting Up the Queue Manager and Default Queues
- shadow sets
- license required, Registering Your Licenses
- shadow sets reformation, Reforming the Shadow Set as Final Postupgrade Backup
- shadow sets, forming, Forming the Shadow Set
- SSL configuration, Configuring SSL for OpenVMS
- swap file size, Running AUTOGEN to Tune the System
- SYSTARTUP_VMS.COM procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- system files
- adding or removing, Adding and Removing Operating System Files (Optional)
- sizes, System File Sizes
- system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
- TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
- testing the system, Testing the System with UETP (Optional)
- third-party networking software configuration, Installing and Configuring Third-Party Networking Software
- tuning the operating system, Running AUTOGEN to Tune the System
- Pre-OS System Environment
- (see POSSE (Pre-OS System Environment))
- Preinstallation
tasks
- collecting information for, Responding to Prompts During the Installation
- firmware revision checking, Firmware on uAlpha Systems, Checking Firmware Version
- OpenVMS Cluster environment, Preparing to Install in an OpenVMS Cluster Environment
- software and hardware components, Examining Software and Hardware Components
- PRESERVE option, PRESERVE Option
- Preupgrade tasks
- backing up system disk, Backing Up the System Disk
- checklist, Preupgrade Tasks, Postinstallation and Postupgrade Tasks
- OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
- DECamds and DECram, Software That Must Be Manually Removed
- FEEDBACK.DAT file, Ensuring You Have a Recent FEEDBACK.DAT File
- shutting down system, Finishing Preupgrade Tasks
- system disk, Preparing the System Disk, Examining the System Disk
- volume shadowing, Shadowing Environment
- Print queue
- creating after installation or upgrade, Creating Print Queues (New Installations, Some Upgrades)
- default
- creating, Setting Up the Queue Manager and Default Queues
- Printer
- recording installation on, Hardware Components
- Problems
- booting, Booting with Default System Parameters, Booting with Default System Parameters
- troubleshooting, If the System Does Not Boot, If the System Does Not Boot
- locked out of system, Booting Without the User Authorization File, Booting Without a User Authorization File
- logging in, Booting Without Startup and Login Procedures, Booting Without the User Authorization File, Booting Without Startup and Login Procedures, Booting Without a User Authorization File
- Product Authorization Key (PAK)
- registering after an installation or upgrade, Registering Your Licenses
- PRODUCT INSTALL command, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- PRODUCT REMOVE command
- files not removed with, Removing the OpenVMS Operating System
- removing operating system files, Removing the OpenVMS Operating System
- Proxy files
- (see Network proxy authorization files)
R- Reboot
- (see also Boot, Booting)
- , Rebooting after AUTOGEN
- (see also Boot, Booting)
- after AUTOGEN, Rebooting after AUTOGEN
- after installation, Rebooting after AUTOGEN
- automatic after AUTOGEN, Rebooting after AUTOGEN
- example, Booting with Default System Parameters, Booting with Default System Parameters
- OpenVMS Cluster members, Rebooting Cluster Members (Upgrades Only)
- Recovery data
- checking for during upgrade, Checking for Recovery Data
- displaying and installing
- using distribution media menu option, Using the Patches and Recovery Data Option (7)
- Release notes
- after installation or upgrade, Customizing the System (New Installations, Some Upgrades)
- before installation, Software Components
- Remedial kits
- deleting archived files, Saving Archived Files
- required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- saving archived files, Saving Archived Files, Saving Archived Files
- Removing operating system files, Removing the OpenVMS Operating System
- Restoring system
disk, Restoring the System Disk
- without booting the OpenVMS CD or DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Restrictions
- for OpenVMS upgrade, Notes, Cautions, and Restrictions
- Rolling upgrades
- caution, Preparing Your System for a Rolling Upgrade
- defined, Glossary
- description, Rolling Upgrade
- maintaining cluster quorum, Preparing Your System for a Rolling Upgrade
- operating system version required, Notes and Restrictions
- preparing system for, Preparing Your System for a Rolling Upgrade
- restrictions, Notes and Restrictions
- tasks after shutdown, What to Do After Shutdown
S- SAN disk, Configuring Œ
Additional Nodes to Boot into a Cluster Using a Shared Disk
- SAN storage device
- delay in EFI initialization, Booting from the Local Drive, Booting from the Local Drive, Booting the OpenVMS I64 OE DVD from the Local Drive, Configuring and Booting FC Boot Device
- graphic, Fibre Channel Host and SAN Storage Controller Configuration
- Satellite
booting, Adding the Network Boot Option to the EFI Boot Manager
- Satellite node
- defined, Glossary
- Save sets
- transferring to system disk, Installing OpenVMS Using Option 1 of the Operating System Menu
- Scratch disk
- defined, Glossary
- SCSSYSTEMID
system parameter
- specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
- SDA
(System Dump Analyzer), Emergency Shutdown with Crash Commands
- Secure Delivery
- and distribution kits, New with OpenVMS Version 8.3, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS I64 and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- and installing patches, Installing Patches (Optional but Recommended)
- defined, Glossary
- new feature, New with OpenVMS Version 8.3
- Selecting active console devices, Selecting Your OpenVMS Console for the Integrity Server System
- Server complex
- defined, Glossary
- SET AUTO_ACTION command, Setting the System for Automatic Booting
- SET
BOOT command, Writing a New Boot Block
- SET BOOT_OSFLAGS command, Setting Boot Flag Parameters
- SET BOOTDEF_DEV command, Setting and Showing Boot Devices
- SETBOOTBLOCK
command, Writing a New Boot Block
- Shadow sets
L
- (see also Volume shadowing)
- , Shadowing Environment
- (see also Volume shadowing)
- adding to boot and dump device lists, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
- backing up system disk, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- forming, Forming the Shadow Set
- license required, Registering Your Licenses
- system parameters, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- reforming, Reforming the Shadow Set as Final Postupgrade Backup
- system disk
- upgrading, Shadowing Environment
- SHOW BOOTDEF_DEV command, Setting and Showing Boot Devices
- SHOW
CRASH command, Emergency Shutdown with Crash Commands
- Shutdown
- after installation, Rebooting after AUTOGEN
- before an upgrade, Finishing Preupgrade Tasks, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
- procedures, Shutting Down the System, Shutting Down the System
- Shutdown option, Using the Shut Down Option (9)
- SHUTDOWN.COM, Shutting Down the System, Orderly Shutdown, Shutting Down the System, Orderly Shutdown
- SIPs (System-integrated products)
- defined, Glossary
- installing after installation or upgrade, Installing and Configuring Layered PProducts (New Installations, Some Upgrades)
- Secure Delivery, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
- differences between OpenVMS Alpha and OpenVMS I64, Differences Between OpenVMS I64 and Alpha Installations
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Secure Delivery Validation
- new feature, New with OpenVMS Version 8.3
- Site-specific
command procedures
- restored during upgrade, Examining Your Command Procedures (Upgrades Only)
- Source drive, Key Terms, Mounting Devices
- defined, Key Terms
- SSL for OpenVMS
- configuring, Configuring SSL for OpenVMS
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- new feature, New with OpenVMS Version 8.3
- upgrading, Upgrading Windowing, Networking, and Related Products
- Standalone Backup, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- Startup command procedure
- booting without, Booting Without Startup and Login Procedures
- errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- Swap file
- checking size, System File Sizes
- modifying size, Running AUTOGEN to Tune the System
- SWAPFILES.COM procedure
- executing to change system file sizes, System File Sizes
- SYS$BATCH queue
- creating, Setting Up the Queue Manager and Default Queues
- SYS$EFI.SYS file
- and writing a boot block, Writing a New Boot Block
- saving files on before upgrade, Saving Files Added or Modified in the SYS$EFI.SYS Boot Partition (OpenVMS I64 Upgrades from Version 8.2 Only)
- SYS$PRINT queue
- creating, Setting Up the Queue Manager and Default Queues
- SYS$UPDATE.STABACKIT.COM procedure, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- SYS$WELCOME
- defining, Creating a System-Specific Login Welcome Message (Optional)
- SYSBOOT.EXE, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- commands, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- SYSGEN
- ALLOCLASS parameter
- for shadow sets, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- setting during installation, OpenVMS Cluster Information You Need, Joining an OpenVMS Cluster
- commands for conversational boot, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
- SYSTARTUP_VMS.COM procedure
- editing to control DECnet Phase IV, Configuring DECnet
- for starting network software at boot, Configuring DECnet
- updating to start layered products and print queues, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
- System
- customizing, Customizing the System (New Installations, Some Upgrades)
- files
- adding, Adding and Removing Operating System Files (Optional)
- removing, Adding and Removing Operating System Files (Optional)
- hang, Detecting and Responding to System Problems, Detecting and Responding to System Problems
- libraries
- compressing and decompressing, Running AUTOGEN
- expanding, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- parameters
- booting with default, Booting with Default System Parameters, Booting with Default System Parameters
- for volume shadowing, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- incorrect values prevent boot, Booting with Default System Parameters, Booting with Default System Parameters
- modifying after installation or upgrade, k Modifying System Parameters
- modifying after upgrade, Modifying System Parameters After an Upgrade
- modifying before upgrade, Verifying System Parameters
- verifying, Verifying System Parameters
- problems
- troubleshooting, If the System Does Not Boot, Detecting and Responding to System Problems, If the System Does Not Boot, Detecting and Responding to System Problems
- shutting down before upgrade, Finishing Preupgrade Tasks
- startup in an emergency, Booting in an Emergency, Emergency Booting
- with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
- without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
- without the UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
- SYSTEM account
- forgotten password, Logging In from a Character-Cell Terminal
- logging in, Logging In to the SYSTEM Account
- setting password, Installing OpenVMS Using Option 1 of the Operating System Menu
- System disk
- adding boot entry to EFI Boot Manager menu, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Upgrade Creates and Validates Boot Options (I64 Only), Setting Boot Options for Your System Disk
- adding system files, Adding and Removing Operating System Files (Optional)
- analyzing and repairing, Examining the System Disk
- backing up, Backing Up and Restoring the System Disk
- after an installation, Backing Up the Customized System Disk and Initiating Systematic Backups
- after installation or upgrade, Backing Up Your System Disk
- alternate disk for, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- before an $ upgrade, Backing Up the System Disk
- from OpenVMS main menu, Using the Operating System Menu
- boot options, Setting Boot Options for Your System Disk
- booting, Booting the New OpenVMS System Disk, Booting Manually from the System Disk, Booting Manually from the Local System Disk
- after installation, Rebooting after AUTOGEN
- after transferring required save set, Specifying the Default Boot Device on Alpha Systems
- checking amount of free space on, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- creating, Installing OpenVMS Using Option 1 of the Operating System Menu
- defined, Key Terms, Glossary
- initializing, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing INITIALIZE or PRESERVE
- alternative methods, INITIALIZE Option, Alternative Ways to Initialize the System Disk, Alternative Method of Initialization
- preparing an alternate for backup, Preparing an Alternate System Disk
- preparing for upgrade, Preparing the System Disk
- preserving, PRESERVE Option, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing INITIALIZE or PRESERVE
- removing system files, Adding and Removing Operating System Files (Optional)
- restoring, Restoring the System Disk
- restoring files on, Using the Operating System Menu
- space needed
- for upgrade, Checking the Size of the System Disk
- to decompress libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
- specifying
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Specifying the Target Disk
- unique volume label requirement, Suggested Procedures
- upgrading, Shadowing Environment
- System Dump Analyzer
- (see SDA)
- System event log (SEL), Booting Operations
- System Generation utility
- (see SYSGEN)
- System-integrated
products
- (see SIPs (System-integrated products), Layered
products)
- SYSTEST account
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- SYSUAFALT.DAT
file, Booting Without the User Authorization File, Booting Without a User Authorization File
T- Target disk
- using backup copy for, Backing Up the System Disk
- Target drive, Mounting Devices
- defined, Key Terms
- TCP/IP
- third-party
- installing, Installing and Configuring Third-Party Networking Software
- OpenVMS Management Station, Running Third-Party TCP/IP Stacks
- TCP/IP Services for OpenVMS
- configuring, Configuring HP TCP/IP Services for OpenVMS
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- upgrade
- remove older versions prior to, Software That Must Be Manually Removed
- upgrading, Upgrading Windowing, Networking, and Related Products
- TDC
- (see Performance Data Collector base software
(TDC_RT), Performance Data Collector (TDC))
- TDC_RT
- (see Performance Data Collector base software
(TDC_RT))
- TDF
- setting during an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- Temporary Instant Capacity (TiCAP)
- defined, Glossary
- requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
- Time
differential factor
- (see TDF)
- Ü
Time
zones
- setting during an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- updating during an upgrade, Updating Time Zone Information
- Timeout
- EFI boot option, Setting EFI Boot Option Countdown Timer (Timeout)
- Troubleshooting
- InfoServer boot problems, Troubleshooting InfoServer Boot Problems
- system problems, If the System Does Not Boot, If the System Does Not Boot
- Tuning operating system, Running AUTOGEN to Tune the System
- TURBOchannel
- booting
- with alternate adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAD adapter, Booting over the Network with an Alternate TURBOchannel Adapter
- with PMAZB adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
- with PMAZC adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
U- UAFALTERNATE
logical name, Booting Without the User Authorization File, Booting Without a User Authorization File
- UETP (User Environment Test Package), Testing the System with UETP (Optional)
- defined, Glossary
- Uninstall
- OpenVMS operating system, Removing the OpenVMS Operating System
- recovery data for, Checking for Recovery Data
- Upgrade
- (see also Preupgrade tasks, Postupgrade tasks)
- , After Installing or Upgrading the OpenVMS Operating System
- (see also Preupgrade tasks, Postupgrade tasks)
- booting
- operating system kit, Booting the Operating System Ú Media
- cautions and restrictions, Notes, Cautions, and Restrictions
- checklist, Upgrade Tasks
- concurrent (OpenVMS Cluster), Concurrent Upgrade
- DECram, Remove Older Versions of DECram for OpenVMS (Alpha Only)
- disk space requirement, Checking the Size of the System Disk
- effect
- on command procedures, Examining Your Command Procedures (Upgrades Only)
- on layered products, Licenses and Layered Products
- on MODPARAMS.DAT file, Modifying System Parameters After an Upgrade
- OpenVMS Cluster
- adding a new CPU, Adding a New System to an OpenVMS Cluster
- preliminary tasks, Preupgrade Tasks for OpenVMS Cluster Environments
- preparing for, Types of Upgrades
- required operating system version, Notes and Restrictions
- PCSI, Using the Operating System Menu
- preparation checklist, Preupgrade Tasks
- recovery data, Checking for Recovery Data
- rolling (OpenVMS Cluster), Rolling Upgrade
- shadowed disks, Shadowing Environment
- stages of, Upgrade Tasks
- time zones, Updating Time Zone Information
- Upgrade paths, Upgrade Paths
- User accounts
- creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
- User authorization file
- (see also UAF)
- , Booting Without the User Authorization File (see UAF)
- (see also UAF)
- User Environment Test Package
- (see UETP)
V- VGA graphics as console device, Selecting Your OpenVMS Console for the Integrity Server System
- Virtual partition
- defined, Glossary
- vms_bcfg command, e
Using EFI to Set Automatic Booting of Your System Disk, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- vms_show command, Displaying EFI Boot Entries and Mapped OpenVMS Devices
- VMSI18N, Installing the OpenVMS Internationalization Data Kit
- VMSINSTAL utility, Installing and Configuring Layered Products (New Installations, Some Upgrades)
- installing layered products independently, Alternative Procedure
- Volume label
- OpenVMS Alpha operating system CD, OpenVMS Alpha Operating System CD
- OpenVMS I64 OE DVD, OpenVMS for Integrity Servers Operating Environment (OE) DVD
- requirement for OpenVMS Clusters, Suggested Procedures
- specifying
- during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
- during upgrade, Specifying the Volume Label
- Volume shadowing
- (see also Shadow sets)
- , Shadowing Environment
- (see also Shadow sets)
- backing up the system disk, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
- defined, Glossary
- forming shadow set, Forming the Shadow Set
- license required, Registering Your Licenses
- system parameters, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
- preparing for upgrade, Shadowing Environment
- reforming shadow set, Reforming the Shadow Set as Final Postupgrade Backup
- VOTES parameter
- checking for rolling upgrades, Preparing Your System for a Rolling Upgrade
W- Warranted
support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
- defined, Glossary
- WBEM Services for OpenVMS
- configuring, Configure WBEM Services for OpenVMS (Optional; I64 only)
- defined, Glossary
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
- new feature, New with OpenVMS Version 8.3
- upgrading, Upgrading Windowing, Networking, and Related Products
- WBEMCIM
- (see WBEM Services for OpenVMS)
- Welcome message
- defining, Creating a System-Specific Login Welcome Message (Optional)
- Windowing products
- installing, Installing OpenVMS Using Option 1 of the Operating System Menu
- reconfiguring, Using the Reconfigure Installed Products Option (5)
- upgrading, Upgrading Windowing, Networking, and Related Products
- Writeboot utility, Writing a New Boot Block
- wwidmgr
- -show wwid command, Viewing the FC Configuration from the Console
|
|
