Using EFI on cell-based servers: On Integrity servers with nPartition support, a separate EFI interface exists for each nPartition. Be sure to access the appropriate nPartition console.

To determine which nPartition EFI interface you are using, use the info sys command at the EFI Shell prompt. This lists the local nPartition number and details about active cells. For processor details, use the info cpu command. (You can also use MP to provide information about the nPartition you are using, as described in the nPartition Administrator's Guide (previously titled HP System Partitions Guide: Administration for nPartitions).)

You can use the MP console interface to access any nPartition’s EFI console. Press Ctrl/B to move from EFI (or from your OpenVMS session) to the MP interface. Log in to MP if you are prompted. A menu then displays the names of all available nPartitions. Select from this list the nPartition that you want to access. To gain console write access for an nPartition console, press Ctrl/E and enter the letters cf. You can use the MP pdcommand to set a default nPartition for MP login; this helps to ensure you are brought to the intended nPartition (for example, to help prevent you from accidentally reconfiguring an nPartition you do not own).

To return to the EFI console (when OpenVMS is not booted), enter the co command at the MP> prompt.

Navigating EFI file system directories: To switch to a different file system, enter the file system name. The following example shows how to switch to fs3: from the current location (top level of the EFI Shell):

Shell> fs3:
fs3:\>

Note that the prompt is now fs3:\. The EFI Shell prompt changes to reflect the file system currently accessed. The Shell prompt is displayed again if you reset the system. Also note that the file system number might change when remapped after hardware changes are made to the server (for example, after an I/O drive is added to the server and the nPartition boots or the map -r command is issued).

File structure of EFI file systems: The file structure of an fs disk is identical to MS-DOS and the commands to move around the structure are similar to MS-DOS commands. For example, to move to directory efi on disk fs0:, enter the cd command:

fs0:\> cd efi
fs0:\efi>

To display the contents of the efi directory, use the dir command.

EFI commands for OpenVMS: Most commands that you issue for OpenVMS purposes at the EFI Shell prompt are issued from \efi\vms on the file system associated with the system disk. You can enter such commands directly from the top level by specifying \efi\vms in the path for subsequent commands, or by first moving to \efi\vms and entering the commands without the path specification. The first example that follows shows how to enter commands from the top level. The second example shows how to move to \efi\vms before entering the commands. The vms_show command displays the equivalent OpenVMS device name for devices mapped by EFI, and the vms_set command can be used to set a debug or dump device. These EFI commands for OpenVMS, known as EFI Utilities for OpenVMS, are usable only when the operating system is not running. To display and set EFI-mapped devices while the operating system is running, use the OpenVMS Integrity servers Boot Manager utility (SYS$MANAGER:BOOT_OPTIONS.COM), as described in Section B.5. The EFI Utilities for OpenVMS are described in the HP OpenVMS System Management Utilities Reference Manual.

Example 1 — From Top Level

fs0:\> \efi\vms\vms_show device . . . fs0:\> \efi\vms\vms_set dump_dev dga3730

Example 2 — First Moving to \efi\vms

fs0:\> cd \efi\vms fs0:\efi\vms> vms_show device . . . fs0:\efi\vms> vms_set dump_dev dga3730

	NOTE: The directory structure and contents of the OpenVMS system disk differs from those of the OpenVMS Integrity servers OE DVD. Note also that the bootstrap on the system disk is located at \efi\vms\vms_loader.efi, while on the DVD it is at \efi\boot\bootia64.efi. (These two files are identical in content.)

EFI aliases: You can define aliases for EFI commands that are easier to remember. For example, to define the alias dir for the ls command, use the alias command as follows:

fs0:\> alias dir "ls"

To define an alias for the command that boots OpenVMS from fs0:, enter the following command:

fs0:\> alias bvms "fs0:\efi\vms\vms_loader.efi"

	NOTE: Setting an alias to point to a specific device can lead to unexpected results. For example, if you insert a DVD in the DVD/CD drive, fs0: now points to the DVD/CD drive. HP recommends using the OpenVMS Integrity servers Boot Manager utility to set your system disk as a boot device for EFI, as explained in Section B.5.

To list the aliases currently defined, enter the alias command:

fs0:\> alias
      dir   : ls
      bvms  : fs0:\efi\vms\vms_loader.efi

Boot device list: Any changes in storage configuration after the system is booted to EFI (such as inserting a DVD into a DVD removable drive or adding SCSI drives on storage enclosures) is not automatically detected by the EFI Shell environment. To have the EFI Shell recognize the device, you must reconnect the device driver (on cell-based servers, use the EFI search command; on other servers, use the EFI reconnect command).

The EFI shell environment creates default mappings for all the device handles that support a recognized file system. After you change the system configuration or add a new device, you must regenerate these mappings. For information about reconnecting devices and regenerating mappings, see Section B.6.2.1 and your hardware documentation or the website listed at the end of this section.

Moving between EFI and MP: To move from MP interface to EFI, type co(for Console) at the MP> prompt. If you are in command mode (at the MP:CM> prompt), first press Ctrl/B to return to the MP> prompt.

When you move to EFI from MP, confirm that you are at the main EFI main menu. If you are at a submenu, to access the main menu exit from the submenu and any subsequent submenus until you return to the main menu.

To move from the EFI to MP, press Ctrl/B (this assumes MP is present and configured).