AlphaStation 400 and SWXCRMGR

From: Jonathan Oei <joei_at_hops.com>
Date: Mon, 29 Jul 1996 12:54:45 -0400

I have a three-channel PCI-SCSI card installed in an AlphaStation 400
running DU 4.0. I just had a raidset go down and I wanted to run
the StorageWorks RAID software (SWXCRMGR.EXE) to fix it.

But, I don't remember how to start it. (embarrased grin)

On my 2100, I just go down to the chevron prompt and type ECU
and then run an application a:swxcrmgr
I even do the same thing on my 4100, and even the 3000/500.

But on the 400 4/233, I type ECU and ARC at the prompt and get
nothing. Even 'help' doesn't yield any clues.

I would RTFM if I could find it, but after our recent move, I fear it
is lost.

Thanks.

--
Jonathan Oei                                      joei_at_hops.com
"Christianity has not been tried and found wanting; it has been
 found difficult and not tried" -- G.K. Chesterton
Received on Mon Jul 29 1996 - 19:59:29 NZST

This archive was generated by hypermail 2.4.0 : Wed Nov 08 2023 - 11:53:46 NZDT