Hi gurus.
First .
I make a one mistake, so I start from begininig
Now I change noumber of device.
After instaling device (YAMAHA CDR 100) in SRM mode:
I type :
> show dev
Anserw:
dka200.2.0.1.0 DKA200 YAMAHA CDR100 1.10
....................
....................
dka207.2.0.1.0 DKA207 YAMAHA CDR100 1.10
and other SCSI devices.
I normally boot.
As a root i do:
# scu show edt
About CDR I recived:
Bus: 0, Target: 2, Lun: 0, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 1, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 2, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 3, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 4, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 5, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 6, Device Type: Write-Once/Read-Many
Bus: 0, Target: 2, Lun: 7, Device Type: Write-Once/Read-Many
I didn't find any conflict.
So I install Gera multimedia (as in the manuall)
All was OK.
Kernel was build, system will begun reboot.
So after reboot, I saw by the moment information about :
kernel panic
any memory error
And system will begin restart once and once.
After rebooting with old kernel all was ok.
No in information in logs.
------------------------------------------------------
Any Help, Idea ????????????
Adam Danieluk
------------------------------
C. S. T.
------------------------------
e-mail: adanielu_at_psyche.cst.tpsa.pl
Received on Fri Mar 14 1997 - 16:54:58 NZDT