Problems with KZPSA SCSI Adapter on Alpha 8200

From: Nagaraja, Raja <Raja.Nagaraja_at_actew.com.au>
Date: Thu, 14 Aug 1997 11:39:59 +1000

Hello all,

We recently installed a KZPSA SCSI Adapter in an Alpha 8200 running
Digital Unix 4.0b. The module in installed in the slot 11 of DWLPA PCI
Shelf. The adapter is connected to a HSZ50 with dual redundant
controllers. When the command show dev is given in the halt prompt the
following error appears:

>>> show dev
13-Aug-1997 20:37:13 kzpsa0.7.0.11.1 dke TPwr 1 Fast 1 Bus ID 7
 P01 A
10
13-Aug-1997 20:37:14 amcsr_lo = 8
13-Aug-1997 20:37:14 abbrr_lo = 88eb
13-Aug-1997 20:37:14 dafqir_lo = 23a9d
13-Aug-1997 20:37:14 dacqir_lo = 248c9
13-Aug-1997 20:37:14 asr_lo = 10
13-Aug-1997 20:37:14 afar_lo = 0
13-Aug-1997 20:37:14 afpr_lo = 510
13-Aug-1997 20:37:54 KZPSA: interrupt due to adapter error

Later when the system boots the following error appears:

13-Aug-1997 20:31:19 pza0 at pci1 slot 11
13-Aug-1997 20:31:19 KZPSA adapter misc error, asr=0x10, afar=0x0,
afpr=0x510
13-Aug-1997 20:31:20 pzaintr: KZPSA adapter misc error, asr=0x10,
afar=0x0, afp
r=0x510
13-Aug-1997 20:31:20
13-Aug-1997 20:31:20 pza_read_log_regs: KZPSA log regs: 1 0x0, 2 0x35,
3 0x9000
084, 4 0x20000e24, 5 0x200021cc, 6 0x9f030000, 7 0x200021cc, 8
0x8921cam_l
13-Aug-1997 20:31:20 cam_logger: bus 4
13-Aug-1997 20:31:20 spo_misc_errors
13-Aug-1997 20:31:21 Adapter miscellaneous error occurred, resetting
adapter...
13-Aug-1997 20:31:21 cam_logger: CAM_ERROR packet
13-Aug-1997 20:31:22 cam_logger: bus 4
13-Aug-1997 20:31:22 spo_bus_reset
                                           
13-Aug-1997 20:31:23 pza_read_log_regs: KZPSA log regs: 1 0x1, 2 0xb, 3
0x90000
84, 4 0x20000e24, 5 0x200021cc, 6 0x9f030000, 7 0x200021cc, 8
0x89210cam_l

Does any one had a similar problem?. Is there any set up needed for the
adapter or is it slot specific on the DWLPA PCI Shelf. The manual says
that slot 11 is for either PCI or EISA. Any help is appreciated.

Thanks

Raja Nagaraja


B.S. (Raja) Nagaraja
Systems Support Specialist
Systems Management Section
Business Systems Division
ACTEW Corporation
GPO BOX 366
CANBERRA, ACT 2601
AUSTRALIA
Phone: 616 270 7443 Fax: 616 270 7445
E-mail: Raja.Nagaraja_at_actew.com.au
Received on Thu Aug 14 1997 - 03:48:53 NZST

This archive was generated by hypermail 2.4.0 : Wed Nov 08 2023 - 11:53:36 NZDT