Hi,
Thanks a lot for the reply from many people,they have told me the
usage of disklabel command. But I found the error message was not
related to the grammar of disklabel.
The system has found the new disk RZ28M.
It all gave the error message if you want to write to the hard
disk.
The error message is:
/dev/rrz1a: character special (8/1024) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1b: character special (8/1025) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1c: character special (8/1026) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1d: character special (8/1027) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1e: character special (8/1028) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1f: character special (8/1029) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1g: character special (8/1030) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz1h: character special (8/1031) SCSI #0 RZ28M disk #8 (SCSI ID
#1) errors = 0/1
/dev/rrz5a: character special (8/5120) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5b: character special (8/5121) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5c: character special (8/5122) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5d: character special (8/5123) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5e: character special (8/5124) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5f: character special (8/5125) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5g: character special (8/5126) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rrz5h: character special (8/5127) SCSI #0 RZ28M disk #40 (SCSI ID
#5) errors = 0/1
/dev/rz1a: block special (8/1024)
/dev/rz1b: block special (8/1025)
/dev/rz1c: block special (8/1026)
/dev/rz1d: block special (8/1027)
/dev/rz1e: block special (8/1028)
/dev/rz1f: block special (8/1029)
/dev/rz1g: block special (8/1030)
/dev/rz1h: block special (8/1031)
/dev/rz5a: block special (8/5120)
/dev/rz5b: block special (8/5121)
/dev/rz5c: block special (8/5122)
/dev/rz5d: block special (8/5123)
/dev/rz5e: block special (8/5124)
/dev/rz5f: block special (8/5125)
/dev/rz5g: block special (8/5126)
/dev/rz5h: block special (8/5127)
And the error message recorded in the system log is:
uerf version 4.2-011 (122)
********************************* ENTRY 1.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 2.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Wed Aug 20 09:27:12 1997
OCCURRED ON SYSTEM HGKA2
SYSTEM ID x00060009 CPU TYPE: DEC 2100
SYSTYPE x00000000
----- UNIT INFORMATION -----
CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # x0000
x0028 LUN x0
TARGET x5
----- CAM STRING -----
ROUTINE NAME cdisk_op_spin
----- CAM STRING -----
Hardware Error
----- CAM STRING -----
ERROR TYPE Hard Error Detected
----- CAM STRING -----
DEVICE NAME DEC RZ28M
----- CAM STRING -----
Active CCB at time of error
----- CAM STRING -----
CCB request completed with an
error
ERROR - os_std, os_type = 11, std_type = 10
----- ENT_CCB_SCSIIO -----
*MY ADDR x07F9FB28
CCB LENGTH x00C0
FUNC CODE x01
CAM_STATUS x0084 CAM_REQ_CMP_ERR
AUTOSNS_VALID
PATH ID 0.
TARGET ID 5.
TARGET LUN 0.
CAM FLAGS x000044C0
CAM_DIR_NONE
CAM_SIM_QFRZDIS
CAM_INITIATE_SYNC
*PDRV_PTR x07F9F828
*NEXT_CCB x00000000
*REQ_MAP x00000000
VOID (*CAM_CBFCNP)() x004B8FE0
*DATA_PTR x00000000
DXFER_LEN x00000000
*SENSE_PTR x07F9F850
SENSE_LEN x40
CDB_LEN x06
SGLIST_CNT x0000
CAM_SCSI_STATUS x0002 SCSI_STAT_CHECK_CONDITION
SENSE_RESID x2E
RESID x00000000
CAM_CDB_IO x000000000000000000000000
CAM_TIMEOUT x00000014
MSGB_LEN x0000
VU_FLAGS x0000
TAG_ACTION x00
----- CAM STRING -----
Error, exception, or abnormal
_condition
----- CAM STRING -----
HARDWARE ERROR - Nonrecoverable
_hardware error
----- ENT_SENSE_DATA -----
ERROR CODE x0070 CODE x70
SEGMENT x00
SENSE KEY x0004 HARDWARE ERR
INFO BYTE 3 x00
INFO BYTE 2 x00
INFO BYTE 1 x00
INFO BYTE 0 x00
ADDITION LEN x0A
CMD SPECIFIC 3 x00
CMD SPECIFIC 2 x00
CMD SPECIFIC 1 x00
CMD SPECIFIC 0 x00
ASC x19
ASQ x00
FRU x06
SENSE SPECIFIC x000000
ADDITIONAL SENSE
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
0020: 00000000 00000000 00000000 00000000 *................*
0030: 7E250000 00005E3C 00000000 00000000 *..%~<^..........*
Does anybody know what the problem is?
Thank you.
regards,
Chi Hai
Received on Thu Aug 21 1997 - 11:19:03 NZST