Dear fellow managers,
does anybody knows, what has to be done to connect a lineprinter
directly to the serial port of an DEC 3000 500.
Up to now the printer was connected via a terminalserver and
lat-protocol.
The old printcap entry for the lineprinter is:
lp|lp0|0|lp|lineprinter:\
:af=/usr/adm/lpacct:\
:br#9600:\
:ct=LAT:\
:fc#0177777:\
:fs#03:\
:if=/usr/lbin/lg02of:\
:lf=/usr/adm/lperr:\
:lp=/dev/lat/621:\
:mx#0:\
:of=/usr/lbin/lg02of:\
:pl#64:\
:pw#132:\
:sd=/usr/spool/lpd:\
:sf:\
:xc#0177777:\
:xf=/usr/lbin/xf:\
:xs#044000:
Does anybody knows all the things I have to do ( ok, changing printcap
entry, but is this all ??? ), to make it work.
All suggestions are welcome. Thanks in advance.
Marcus Bahlo
------------------------------------------------------------------------
Marcus Bahlo
Digital Systems Institute
Dept. of Electrical Engineering
University of Kaiserslautern Phone : ++49-631/205-2604
Erwin-Schroedinger-Strasse Fax : ++49-631/205-3606
D-67663 Kaiserslautern / Germany E-Mail : bahlo_at_e-technik.uni-kl.de
------------------------------------------------------------------------
Received on Wed Oct 22 1997 - 01:40:33 NZDT