I have 2 workstations (255/233 and 255/300) both running DU 3.2G. The
255/233 has a PowerStorm 3D10 graphics option in it, and the 255/300 has
a ZLXp-E1 graphics option in it, and both are connected to VRC21-WA
monitors. I have changed Xservers to us a resolution of 1280x1024 on the
255/233.
The first problem that I had was that the 2 systems were claiming
different dpi values for their screens, 95x95 for the ZLXp-E1 and 116x110
for the 3D10. I was able to fix this with th -dpi0 95 switch to X. The
second problem I am having is that polyline is just drawing bad lines on
the 3D10, this happens if the program is run on either system with the
display going to the 3D10. If the display is set to the system with the
ZLXp-E1 everything displays correctly.
Any ideas on this one, I find it hard to blame this on on our application
since it is very consistant in it's failue.
- Eric R. Crane
Westinghouse Electric
PCD/Simulators
Received on Wed Jan 08 1997 - 22:43:40 NZDT