> Hello Managers,
>
> i have the following problem:
>
> I have tried to mount a documentation disk for DEC Unix on a DEC 3000
> model 300
> running OSF/1 without success. I can mount and access it without any
> difficulty on
> another Alpha workstation, this works very well. I mount it with:
>
> mount -r /dev/rz3c /cdrom
>
> I have also tried the following but it fails on both machines:
>
> mount -r -t cdfs /dev/rz3c /cdrom
>
> I notice from the web reference
> (http://www.europe.digital.com/info/QB000T/QB000TPF.PDF)
> that the SCSI adapter is SCSI-2 5-MBytes/s. Is that alright with the
> Plextor PX-32TSI with SCSI-3 interface?
>
> The error:
>
> No valid filesystem exists on this partition
>
> I didn't rebuild the kernel after adding the disk because the
> config file has an unused disk entry and I assumed I could use that.
> The system recognized the drive on reboot. After the failure to mount I
> executed MAKEDEV on the appropriate device (which already existed) but I
> still get the message above. I haven't rebooted since the MAKEDEV.
>
> The hardware is used for an online library system so I don't have
> too much opportunity to play around with it. Can you advise me whether
> I need to rebuild the kernel or just reboot after running MAKEDEV or might
> something else be wrong?
>
> Best regards,
>
Andreas Grzybowski
Received on Mon Dec 14 1998 - 11:29:20 NZDT
This archive was generated by hypermail 2.4.0
: Wed Nov 08 2023 - 11:53:38 NZDT