Hi folks,
Our situation is as follows:
2 AxP 4100 each one with 2 nic's (the machine names are sunat2d and
sunat2c)
1 ESA 10000
sunat2d :
tu0 = primary (150.100.1.190)
sunat2d+
tu1 = primary (150.100.1.191)
sunat2c
tu0 = primary (150.100.1.180)
sunat2c+
tu1 = primary (150.100.1.181)
Disk service name :
prico_ds1 = 150.100.1.192
When we use "asemgr" for the first time (my LSM configuration is in
sunat2d), TruCluster ask me for the member's name. I tell the cluster
for : sunat2d,sunat2c. Then ask me for the nic's. At this momment ask me
for an additional NIC (for sunat2d y sunat2c). But when I use the
"display network interface" option, I see that sunat2d, sunat2c,
sunat2d+ and sunat2c+ appears like primary. The monitored option are
established for all of this. Notice that we are in the same IP network
class.
The situation is as follows :
When the service (prico_ds1) is in sunat2d, we can connect to
150.100.1.192 (prico_ds1) and we entered to sunat2d.
When we disconnected the cable of sunat2d (tu0) the service and IP
(prico_ds1) pass to sunat2c inmediatly (30 secs).
If you notice, before pass the service to the other computer it should
try to connecto to TU1, but it did not happen, directly pass to the
other machine.
We want to know how can we do to tell TU1 catch the service (IP) before
the services and IP pass to the other machine.
Thanks in advance
UA
Received on Thu Feb 12 1998 - 23:10:38 NZDT