Dear Alpha Guru's,
I need some more serial ports on an AS500 (to drive some fax modems) so I
tried installed a PCI serial card. But DU4.0E is not recognising the PCI
card. This is what I see at boot up -
PCI device at bus 0, slot 12, function 0 could not be configured:
Vendor ID 0x10b5, Device ID 0x9050, Base class 0x2, Sub class 0x80
Sub-VID 0xd84d Sub-DID 0x6808
has no matching entry in the PCI option table
What to do?
Installing an ISA serial card in a AS255 worked fine (after setting the
IRQ/address appropriately). The AS500 only has PCI slots however.
_____________________________________________________________________________
Andrew "Alf" Leahy, phone: +61 2 47 360622
Unix Systems Administrator, fax: +61 2 47 370770
School of Computing & IT, UWS Nepean
http://www.cit.nepean.uws.edu.au/~alf/
Received on Tue Mar 23 1999 - 03:12:00 NZST