Hello
I am trying to configuring RA7000 with a HSZ70 card to a ES40 the version
of TRU64 is 4.0F and the version of the PCMCIA is 7.3 .
I am connecting the HSZ70 to a terminal (Wyse) with the cable 17-04074-01
(++A01) and a convertor 12-45238-03 the Wyse configured with 9600, 8bit, 1
stop and none pa.
In moment that I pledge the equipment shows in screen the initialization of
the controlling HSZ70 as follows
Firmware Version: V73Z (00)
Informational Report
Instance Code:01010302
Last Failure Code: 018000A0 ( No last Failure Parameters)
HSZ70 >
When it shows the Promt HSZ70 > not permits me to introduce any command
I have treated to Configure direct serial conetion of the port of the
serving to the port of maintenance of the controller , but we configure
this for the moment add this line to the /etc/remote
b9600:dv=/dev/tty00:br#9600:pa=none and to connect us use the command tip
b9600, presents us a message of conected, but of I can not write nothing
but.
Try to executing the remote service of SSW but it does not find serving with
the serial cable or with TCP/IP
If have the configuration of the cable for conect of the PC to the HSZ70
Beforehand thank you very much by your help.
Received on Thu Aug 26 1999 - 13:30:39 NZST