Thanks to all who responded
jrjame John James <jrjame_at_acxiom.com>
Hoai Tran <HTran_at_freightcorp.com.au>
Alan Davis davis_at_tessco.com
Hank Lee <togasan_at_yahoo.com>
Nikola Milutinovic <Nikola.Milutinovic_at_ev.co.yu>
Paul Crittenden <crittend_at_storm.simpson.edu>
Original question ,
How to determine what RAID H/W (Model number ..etc) is installed on an
AS4100 DU4.0E and also what level its configured to ?
Answers from replies,
1- If by shutting system down to the console prompt type the following
command.
# P00 >>> show config |more
# show dev
2- If you can not take the system down you might be able to find out with
either
# scu show edt
# more /var/adm/messages
3- You can use /usr/sbin/sys_check to create a complete configuration
document for the system. See the sys_check manpage.
You may also use dia and sift thru the 110 record. There are some
indications of what hardware is used in the
boot messages.
Thanks,
Received on Fri Jul 14 2000 - 14:08:54 NZST