Hello,
I just installed a KZPCA-CY (high voltage diff) scsi card in a DS20 running 4.0f. Ther is also a SE scsi card that all the internal drives are connected to installed. It is working fine, but my new card is not seen.
I built a new kernel and rebooted with that, but it is still not seen. Is there anything special I have to do to get the box to recognize the new card?
Here is the output from scu:
scu> scan edt all
Scanning all available buses, please be patient...
scu> show edt
CAM Equipment Device Table (EDT) Information:
Device: CD-224E Bus: 0, Target: 0, Lun: 0, Type: Read-Only Direct Access
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 0, Type: Direct Access
scu> show edt all
CAM Equipment Device Table (EDT) Information:
Device: CD-224E Bus: 0, Target: 0, Lun: 0, Type: Read-Only Direct Access
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 1, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 2, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 3, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 4, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 5, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 6, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 0, Lun: 7, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 1, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 2, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 3, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 4, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 5, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 6, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 1, Lun: 7, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 1, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 2, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 3, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 4, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 5, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 6, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 2, Lun: 7, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 0, Type: Direct Access
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 1, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 2, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 3, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 4, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 5, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 6, Type: not present
Device: RZ2DD-LS Bus: 2, Target: 3, Lun: 7, Type: not present
scu>
Received on Thu Jul 20 2000 - 15:03:52 NZST