Hello Tru64 Managers!
I am running SWCC500 Agent on a GS60 server running Tru64 UNIX 4.0F and SWCC 2.2
Windows Client on my Windows NT 4.0 WS. The UNIX agent monitors four HSZ70
controllers on a shared bus. I have another GS60 on the opposite side of the
shared bus (actually, there are two shared buses between the servers, each has
two HSZ70 controllers). SWCC500 installed only on one GS60. Every time I exit
SWCC "CLI Window" in Windows, the following message gets written to the GS60's
console screen:
hostname steamd[31465]: WARNING: - socketRead():
Invalid argument (SP_SOCKET: socketRead)
Functionality of the SWCC Client in Windows is never affected and I can always
perform storage management tasks. Does anyone know how I can treat the cause of
this warning message so it stops popping up on the console? Connection between
the Client and the Agent is established through TCP/IP. Connection between the
Agent and HSZ70 controllers is established through SCSI bus. I configured the
Agent to e-mail me all FATAL and WARNING messages. En example of such a message
is attached.
Thanks,
Vladik Valikhovsky
UNIX Support Group
ACS GSG
____________________Forward Header_____________________
Subject: StorageWorks Agent on hostname.domainname.com
Author: <StorageWorks_Agent_at_hostname.domainname.com>
Date: 10/5/2000 4:50 PM
This is a message from your StorageWorks
RAID Manager Software. A RAID system status
change has been detected. Corrective action may
be required! Refer to the following status
information and your Agent Log file for more
direction.
Hostname: hostname.domainname.com
WARNING: - socketRead(): Invalid argument (SP_SOCKET: socketRead)
Received on Fri Oct 06 2000 - 15:26:39 NZDT