Managers,
Today I had an Alpha 4100 (Tru64 4.0E) server startup problems. Every time it tries to boot it gives :-
(boot dra0.0.0.3.1 -flags A)
READ/WRITE failed with status 0002 on dra.0.0.0.3.1
failed to read dra.0.0.0.3.1
bootstrap failure
System H/W details :-.
>>Show dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 7
dka500.5.0.1.1 Dka500 RRD47 1206
polling isp0 (Qlogic ISP1020) slot 2, bus 0 PCI, hose 1 SCSI Bus ID 7
polling dac0 (Mylex DAC960) slot 3, bus 0 PCI, hose 1
dra0.0.0.3.1 DRA0 2Member RAID 1 Failed
dra1.0.0.3.1 DRA1 4Member RAID 5
polling floppy0 (FLOPPY) PCEB -XBUS hose 0
dva0.0.0.1000.0 DVA0 Rx23
polling tulip0 (DECchip 21140-AA) slot 4, bus 0 PCI, hose 1
ewa0.0.0.4.1 00-00-F8-09-94-EA Fast
polling tulip1 (DECchip 21140-AA) slot 5, bus 0 PCI, hose 1
ewb0.0.0.5.1 00-00-F8-05-6A-4A Fast
polling pfi0 (DEC PCI FDDI) slot 5, bus 0 PCI, hose 0 fwa0.0.0.5.0 pdq_state_k_link_unavail
DEFPA Error: fwa0.0.0.5.0 can not be started
DEFPA Error: please check FDDI connection
fwa0.0.0.5.0 00-00-F8-E7-82-9D
It seems that there is a problem on RAID 1.
Is there anything I can do to fix this or I just need to call a Hardware engineer.
Regards,
Hisham Al Saad
Bahrain Telecommunications Company
Tel : +973-883973
Fax : +973-9103973
ahisham_at_batelco.com.bh
Received on Thu Dec 21 2000 - 08:39:32 NZDT