hello admins,
today I have seen that our alpha 4000 system has been shutdown !
power button was in pressed state, but front panel indicator has no
electricity ( disks were on !)
I have played with plugs ( at the rear end) and it started to work.
Then I have seen it has been crashed ! I have got the following output with
dia
Question : Can I be sure that, this is the result of CPU fan problem ? Or is
there any other reason ?
Thank you for your help !
**** V3.3 ********************* ENTRY 3 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 203.
Timestamp of occurrence 28-DEC-2000 02:58:15
Host name data
System type register x00000016 Alpha 4000/1200 Series
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 302. ASCII Panic Message Type
-1. - (minor class)
SWI Minor class 9. ASCII Message
SWI Minor sub class 1. Panic
ASCII Message panic (cpu 0): System Uncorrectable
Machine Check
**** V3.3 ********************* ENTRY 4 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 202.
Timestamp of occurrence 28-DEC-2000 02:58:15
Host name data
System type register x00000016 Alpha 4000/1200 Series
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 100. Machine Check Error - (major class)
1. - (minor class)
Software Flags x0000000300000000
IOD 0 Register Subpkt Pres
IOD 1 Register Subpkt Pres
Active CPUs x00000001
Hardware Rev x00000000
System Serial Number AY71232928
Module Serial Number
Module Type x0000
System Revision x00000000
Machine Check Reason x0208 Fatal Environmental Event Interrupt
Environmental Entry ---> System Environmental Register Follows
======================== =====================================
Sys Environmental Regs x0000C357 Function Reg<15:8>: x000000C3
Failure Reg <7:0> : x00000057
Power Supply 0 Present and Ok
System Fans are OK
<<<HERE>>> PROBLEM with CPU Fan 0
<<<<<<<HERE>>>>>>>>>>>>
Temperature is OK
PALcode Revision Palcode Rev: 1.21-26
selcuk.karaca_at_aski.gov.tr
Unix sys Admin
ASKI - ANKARA
Received on Sat Dec 30 2000 - 16:59:18 NZDT