Thanks to all who responded.
I was trying to setup the DECserver standalone and even rebooting didn't
work properly. After that I connected the thing in our network and added the
following line to the bootptab-file:
DS04: tc=DS.default: ha=0000F8EF95BF: ip=101.10.1.91: bf=MNENG2:
sm=255.255.255.0:
I had put a terminal on port 1 and while putting on the 90M I pushed the
reboot button for 10 seconds. This seemed to be the way and now I can setup
everything through the terminal.
Best regards,
Roland
The original question was:
> Hi managers,
>
> About 2 weeks ago I was looking for documentation on a DECserver 90M. I
> got a lot of pdf-files and url's where to find out more about DECservers.
> Thanks a lot, but I'm still struggling to configure this terminal server.
> Nothing happens when I try to connect directly through a terminal or
> through a com-port of a laptop.
> I also don't know the DECserver's ip-address, so I also cannot reach it
> through Digital's Access Manager or telnet.
>
> I hope someone knows how to reset the thing or change it's ip-address.
> Thanks in advance.
>
> Regards,
>
> Roland
Received on Tue Mar 13 2001 - 07:41:32 NZDT