I have a 2100A running 5.0A. I plugged a TZ88 tape device onto the
external SCSI port and rebooted. I can see the device MKB500 from the
console and it is listed as a TZ88. When I boot into 5.0A it creates
the device special files:
/var/adm/syslog.dated/current# ls /dev/tape
tape0 tape0_d0 tape0_d1 tape0_d2 tape0_d3 tape0_d4 tape0_d5 tape0_d6 tape0_d7 tape0c
but this fails:
/var/adm/syslog.dated/current# mt -f /dev/tape/tape0c status
/dev/tape/tape0c: No such device or address
as does this:
/var/adm/syslog.dated/current# mt status
/dev/ntape/tape0_d1: No such device or address
Do I have to do something else to make the tape device usable?
--
Daniel Monjar (mailto:dmonjar_at_orgtek.com)
" 'cause Life's a lesson, you learn it when you're through."
-- Limp Bizkit
Received on Wed Mar 14 2001 - 17:35:15 NZDT