i was told the solution: "type init again"
but it doesn't work!
if i do, my host is "offline" again from the HSG
i can boot but i can't see HSG disks...
-----Message d'origine-----
De: ROBIN Jean-Marie (EURIWARE S.A.)
Date: lundi 2 avril 2001 17:23
À: 'tru64-unix-managers_at_ornl.gov'
Objet: cannot boot a GS160: main memory zone is not free
Hello managers,
I have a GS160 with a KGPSA card connected to a HSG80
under the console SRM prompt, i typed:
"init"
and
"wwidmgr -show adapter"
the command returns:
item adapter WWN Cur Topo Next Topo
[0] pga0.0.0.4.11 2000... FABRIC FABRIC
(and on the HSG80 my host is now "On Line")
but when i type "boot"
the command returns immediately with the following message:
warning -- main memory zone is not free
If i use only "init" but without "wwidmgr"
boot is ok but my host is "Offline" from the HSG and i can't see any disk
from the HSG.
Any help would be appreciated!
Thanks
boot and the system came up.
but i can't see the disks from the HSG80.
On the HSG80, "show connection" returns:
ATTENTION :
Si vous n'êtes pas destinataire de ce message, vous n'êtes pas autorisé à
copier, retransmettre, distribuer, révéler ou conserver le contenu de ce
message.
WARNING :
If you are not the intended recipient, you are not authorised to copy,
disclose, distribute or retain in this e-mail.
ATTENTION :
Si vous n'êtes pas destinataire de ce message, vous n'êtes pas autorisé à copier, retransmettre, distribuer, révéler ou conserver le contenu de ce message.
WARNING :
If you are not the intended recipient, you are not authorised to copy, disclose, distribute or retain in this e-mail.
Received on Mon Apr 02 2001 - 15:57:06 NZST