Hello managers...
I have a serious problem...
our power GOING TO disk shelf, has been cut off.. I have played some with plug, and power became OK.
I have started the system..But after a time all of the disks, connected to RAID card, have crash leds' (amber color) became on. Others(SCSI disks) are ok.
RAID card is KZSPC 3 channel ...
CAN ANYONE GUIDE ME...?
TAI..
the following are the data, i could gather..
***************************************
I could boot the system, because system disks are SCSI...
at the startup ;
re0 at xcr0 unit 0 (unit status=OFFLINE, raid level 5)
re1 at xcr0 unit 1 (unit status=OFFLINE, raid level jbod)
I run the swxcrmon, and get the following ;
shelf error on channel 2
logical RAID drive 0 is dead
logical RAID drive 1 is dead
the hard disk at channel 0 target 0 is failed
the hard disk at channel 0 target 2 is failed
the hard disk at channel 0 target 4 is failed
the hard disk at channel 1 target 1 is failed
the hard disk at channel 1 target 3 is failed
the hard disk at channel 2 target 1 is failed
I have gathered the following from the SRM console...
P0>>>show pci0
bus0 iod0(pci0) type rev name
... ... ... .... ...
5 mylex dac9600 11069 0000 dac0
************************
P0>>>test pci0
polling dac0 (mylex 9600) slot 5 bus 0 PCI, hose 0
dra0.0.0.5.0 dra0 5 member RAID 5 failed
dra1.0.0.5.0 dra1 1 member JBOD failed
Received on Tue Jul 31 2001 - 15:51:37 NZST