According to the docs for Tru64 4.0F Patch Kit 6, both the 8952U and
8951U are supported by the itpsa driver (it's part of the "Fixes simple
lock timeout on EV6 systems" patch). I applied the patch kit and rebuild
/genvmunix but the itpsa driver still doesn't like the 8952U.
This is the /var/adm/messages output :
vmunix: itpsa0 at pci1000 slot 10
vmunix: Checksum read error.
vmunix: *** Attempt to run on unsupported adapter ***
vmunix: - Failed to configure device in PCI bus 1000, slot 10 with driver itpsa
I also checked with setld and the above patch is in fact installed.
At this point I don't know how to proceed. If anybody out there uses
an 8951U or 8952U SCSI adapter with 4.0f I really would appreciate it
if you could tell me how you got it to work.
Thanks
Dirk Hufnagel
Received on Sat Sep 22 2001 - 22:39:29 NZST