Hi managers!
I need help to understand what's going on:
********************************* ENTRY 1.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 196.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Sep 28 11:56:03 2001
OCCURRED ON SYSTEM drp01
SYSTEM ID x0007001E
SYSTYPE x00000000
----- UNIT INFORMATION -----
CLASS x0001 TAPE
SUBSYSTEM x0000 DISK
BUS # x0003
x00C8 LUN x0
TARGET x1
********************************* ENTRY 2.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 100. CPU EXCEPTION
SEQUENCE NUMBER 184.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Sep 28 10:02:17 2001
OCCURRED ON SYSTEM drp01
SYSTEM ID x0007001E
SYSTYPE x00000000
----- UNIT INFORMATION -----
UNIT CLASS CPU
********************************* ENTRY 3.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Thu Sep 27 03:28:40 2001
OCCURRED ON SYSTEM drp01
SYSTEM ID x0007001E
SYSTYPE x00000000
MESSAGE Alpha boot: available memory
from
_0xb5e000 to 0xfffe000
Digital UNIX V4.0F (Rev. 1229);
Wed
_May 16 10:49:23 GMT 2001
physical memory = 256.00 megabytes.
available memory = 244.77 megabytes.
using 975 buffers containing 7.61
_megabytes of memory
Digital Personal WorkStation 500au
Firmware revision: 6.9-7
PALcode: Digital UNIX version 1.22-0
[available upon request]
isp1 at pci1000 slot 8
isp1: QLOGIC ISP1040B/V2
isp1: Firmware revision 5.57 (loaded
_by console)
isp1: Fast RAM timing enabled.
scsi3 at isp1 slot 0
tz25 at scsi3 target 1 lun 0 (LID=2)
_(DEC TZ89 (C) DEC 2150)
_(Wide16)
tz28 at scsi3 target 4 lun 0 (LID=3)
_(DEC TZ89 (C) DEC 2150)
_(Wide16)
[available upon request]
--- snip snip ---
The CAM SCSI errors occurs in 4 different machines sometimes preceded
by the CPU error. It seems that this problem is trigged by our
backup software when writing to the tape.
The 4 machines has the same hardware configuration and run the same
software.
Drives and controllers were replaced with new ones but the problem
is still there.
TIA,
Christian.
--
|<- Christian Biache Christian.Biache_at_thalesatm.com ->|
|<-Thales ATM - 19, rue de la Fontaine - 92221 Bagneux Cedex - France->|
|<- http://www.thalesatm.com ->|
Received on Tue Oct 02 2001 - 10:31:24 NZST