Hallo,
Iam havinfg serious problem with a disk in an XP1000 Workstation.
I can not read the label or mount the disk. The disk is configured
with advanced file system. I see the following error in
/var/adm/messages:
cam_logger: CAM_ERROR packet
Oct 22 16:25:43 psa014 vmunix: cam_logger: bus 0 target 1 lun 0
Oct 22 16:25:43 psa014 vmunix: cdisk_rec_error
Oct 22 16:25:43 psa014 vmunix: Recovery Failed
Oct 22 16:25:43 psa014 vmunix: Hard Error Detected
Oct 22 16:25:43 psa014 vmunix: DEC RZ2DC-KA (C) DEC5520
Oct 22 16:25:43 psa014 vmunix: Active CCB at time of error
Oct 22 16:25:43 psa014 vmunix: Target selection timeout
Oct 22 16:25:43 psa014 vmunix: cam_logger: CAM_ERROR packet
Oct 22 16:25:43 psa014 vmunix: cam_logger: bus 0 target 1 lun 0
Oct 22 16:25:43 psa014 vmunix: cdisk_op_spin
Oct 22 16:25:43 psa014 vmunix: Device Not Ready
Oct 22 16:25:43 psa014 vmunix: Hard Error Detected
Oct 22 16:25:43 psa014 vmunix: DEC RZ2DC-KA (C) DEC5520
Oct 22 16:25:43 psa014 vmunix: Active CCB at time of error
Oct 22 16:25:43 psa014 vmunix: Target selection timeout
.
.
Oct 22 18:03:17 psa014 vmunix: Device will no longer be power managed.
Oct 22 18:03:17 psa014 vmunix: cam_disk: [0/1/0] Failed to deregister from
power
manager (0x1)
Then disklabel -r gives the following message:
----------------------------------------------
disklabel: /dev/rrz1a: No such device or address
Is it possible to recover datas from this disk with salvage utility.
If it is yes, then how I have to proceed?The datas are important.
Any help will be very much appreciated.
Thanks in advance,
Kumar
Received on Tue Oct 23 2001 - 20:07:56 NZDT