Thanx to
Chris Ford
Sturm Warren
The problem ended up being dsk10h which was mirrored to dsk1h.
For mirroring purposes the partition "h" is used.
As my dsk10h was already used it gave me an error
I removed dsk10h temporarily from the config and ran "volrootmir" again which
worked fine
Thanx
Balaji./
>===== Original Message From Ford Chris - cford <Chris.Ford_at_acxiom.com> =====
Without looking at your partition table, it sounds like you don't have
enough room to write out the LSM info in dsk0h. Try resizing the dsk0b and
leave like 2MB free for dsk0h. That's big, you actually only need 16k but 1
or 2 MB is easier. When you add the disk to LSM and build the mirror it
writes the LSM info to the h partition. Hope this helps.
Chris Ford
UNIX Systems Engineer
Acxiom Corporation
-----Original Message-----
From: balaji [mailto:balaji_at_temple.edu]
Sent: Monday, March 18, 2002 5:18 AM
To: tru64 managers
Subject: LSM root mirror in v5.1
Hello managers
I am trying to re-mirror a failed root disk after replacement and I
am having some problems.I needed some help in this regard
I have 4GB disk (dsk0a / and dsk0b swap) mirrored to a bigger disk (18 GB)
(dsk10a / and dsk10b swap).
The other partitions on the bigger disk (dsk10g and dsk10h) are also
mirrored
to dsk2c and dsk3c respectively.
dsk0a ---> dsk10a
dsk0b ---> dsk10b
dsk2c ---> dsk10g
dsk3c ---> dsk10h
Last week my dsk0 failed and I replaced it with the fresh one,
LSM worked fine and it disassosiated all the dsk0 related plexes (rootvol-01
and swapvol-01)
I removed both rootvol-01 and swapvol-01 and underlining subdisks.
Now when I try to remirror the rootdisk using the following command
# volrootmir dsk0 (As I want only root and swap) it says
dsk0h is not large enough.
But I am not asking it to mirror dsk0h (Only dsk0a and dsk0b).
What might be the problem?
Any ideas
Thanx
Balaji./
********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.
Received on Tue Mar 19 2002 - 14:44:47 NZST