Tape dirve in an HSG80

From: Jim Kurtenbach <KurtenbachJ_at_crlcorp.com>
Date: Mon, 18 Nov 2002 10:53:08 -0600

Greetings all,

I am trying to add a TZ89 SBB tape drive to our fibre fabric SAN. I have
done all the usuall stuff:
I am using selective storage presentation and do not have the switched ports
zoned.
Disks show up fine.

Anyone have any experience using a TZ89 in a HSG80?

Here's my config.

HSG804_BOT> run config

Config Local Program Invoked

Config is building its tables and determining what devices exist
on the subsystem. Please be patient.

add passthrough TAPE21100 2 11 0

Config - Normal Termination
HSG804_BOT> add unit p1 tape21100
HSG804_BOT> set p1 id=402
HSG804_BOT> sho p1
    LUN Uses Used by
----------------------------------------------------------------------------

--
  P1                                         TAPE21100
        LUN ID:      6000-1FE1-0005-3CC0-FFFF-FFFE-0002-0B00
        IDENTIFIER = 402
        Access:
                ALL
        State:
          ONLINE to the other controller
          NOPREFERRED_PATH
DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee.  Access to this
message by anyone else is unauthorized.  If you are not the intended
recipient, any disclosure, copying, or distribution of the message, or any
action or omission taken by you in reliance on it, is prohibited and may be
unlawful.  Please immediately contact the sender if you have received this
message in error. Thank you.

Received on Mon Nov 18 2002 - 16:53:53 NZDT