Hi,
I have clu_add_member'ed member 2 succesfully. The 2nd member boots ok on
the genvmunix and generates a new vmunix. But rebooting results in:
-------
hwc_read_cdb: failed to read cluster database
hwc_read_cdb: cluster database maybe missing/empty?
panic (cpu 0): hwc_read_cdb: cannot boot without cluster database
syncing disks... done
-------
After that I can still boot on the genvmunix, but not on any vmunix.
Any suggestions or solutions?
HW Config:
2x DS20E (FW 6.5-13)
1x SAN Switch (Fabric OS 2.6.0h)
1x HSG60 (Software V87L-4)
SW Config:
member 1: running Tru64 5.1B + TruCluster + t64v51bb22as0002-20030415
HSG60: the 2 servers have a unit offset of 20 and their units are d21
(cluster wide root), d22 (member1 root disk), d23 (member2 root disk), d24
(quorum disk)
Regards,
Maurice Akkermans
Tellabs Denmark A/S
-----------------------------------------
============================================================
The information contained in this message may be privileged
and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an
employee or agent responsible for delivering this message to
the intended recipient, you are hereby notified that any
reproduction, dissemination or distribution of this
communication is strictly prohibited. If you have received
this communication in error, please notify us immediately by
replying to the message and deleting it from your computer.
Thank you.
Tellabs
============================================================
Received on Fri Oct 10 2003 - 10:00:05 NZDT