HELP! Can't see HSZ LUNs in 5.1a

From: McCracken, Denise <Denise.McCracken_at_misyshealthcare.com>
Date: Sun, 12 Oct 2003 10:12:38 -0700

        This is a critical down site. Please help:


        I just did a fresh start upgrade from 4.0f to 5.1a and I can't see
the devices for the raidsets in the HSZ controller. I have never seen this
before!

        I see the controller itself, and the LUNs, but they don't have
device files. How do I fix this? dsfmgr -K doesn't work.

        SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST
 HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID PATH
-------------------------------------------------------------------------
   48: 5 osflab1 disk none 0 5 dsk3 [3/0/1]
 
      WWID:04100022:" *G* HSZ40 ZG65009132"
 
 
      BUS TARGET LUN PATH STATE
      ------------------------------
      3 0 1 valid
      3 0 2 valid
      3 0 3 valid
      3 0 5 valid
      3 0 6 valid
 

        There are my LUNs, but I only have one device file for the whole
thing!

# hwmgr -view dev
 HWID: Device Name Mfg Model Location
 
----------------------------------------------------------------------------

--
    5: scp                           (unknown)        (unknown)
    6: /dev/kevm
   34: /dev/disk/floppy0c            3.5in floppy     fdi0-unit-0
   44: /dev/disk/dsk0c      DEC      RZ28D    (C) DEC bus-0-targ-0-lun-0
   45: /dev/disk/dsk1c      DEC      RZ29B    (C) DEC bus-0-targ-1-lun-0
   46: /dev/disk/dsk2c      DEC      RZ28M    (C) DEC bus-1-targ-0-lun-0
   47: /dev/disk/cdrom0c    DEC      RRD45   (C) DEC  bus-2-targ-6-lun-0
   48: /dev/disk/dsk3c               HSZ40            bus-3-targ-0-lun-1
   49: /dev/ntape/tape0     DEC      TLZ07     (C)DEC bus-2-targ-5-lun-0
	Do I need to do something in dsfmgr besides -K?
thanks
-d

Received on Sun Oct 12 2003 - 17:15:06 NZDT