Two problem, actually, it wouldn't boot, and since I had it down
decided to update the firmware
First prtoblem: Using Firmware update v6.5
The default bootfile for this platform is
[ARCHIVE]NOFILE.EXE
Hit <RETURN> at the prompt to use the default bootfile.
Bootfile:
%APB-I-FILENOTLOC, Unable to locate NOFILE.EXE
%APB-I-LOADFAIL, Failed to load secondary bootstrap, status = 00000910
halted CPU 0
halt code = 5
HALT instruction executed
PC = 20003d10
warning -- HWRPB is invalid.
>>>
Second Problem:
It goes through the usual booting sequence ending with
exec: /sbin/mount_advfs -F 0x4000 usr_domain#usr /usr
trap: invalid memory read access from kernel mode
faulting virtual address: 0x00000000000004b0
pc of faulting instruction: 0xfffffc00002cdc70
ra contents at time of fault: 0xfffffc000038d4c0
sp contents at time of fault: 0xfffffe0409c8efe0
panic (cpu 0): kernel memory fault
syncing disks... done
DUMP: blocks available: 786432
DUMP: blocks wanted: 15154 (partial compressed dump) [OKAY]
DUMP: Device Disk Blocks Available
DUMP: ------ ---------------------
DUMP: 0x1300013 593919 - 786429 (of 786430) [primary swap]
DUMP.prom: Open: dev 0x5100001, block 786432: SCSI 0 1004 0 0 0 0 0
DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
DUMP: Writing data. [1MB]
DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
DUMP: crash dump complete.
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc000052abb0
the LEDs are at this time
1 1 1 0
0 1 0 0
where 1 is on
Drive gone bad?
Tom
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 5/9/2004
Received on Wed May 26 2004 - 16:09:38 NZST