problem patching with clu_upgrade

From: Timo Aaltonen <tjaalton_at_cc.hut.fi>
Date: Thu, 04 Nov 2004 16:30:01 +0200 (EET)

         Hi

   I'm having problems rolling-upgrading a Trucluster 5.1B PK3 -> PK4.
Network traffic (rsh et al.) through the interconnect works, but still I
only get errors like:

--
#  clu_upgrade -v check setup 1
Retrieving cluster upgrade status.
*** Error ***
All members must be running without tagged files.
--
# clu_upgrade setup 1
This is the cluster upgrade program.
You have indicated that you want to perform the 'setup' stage of the
upgrade.
Do you want to continue to upgrade the cluster? [yes]:
*** Error ***
Member '1' appears to be booting or is in single-user mode. Either wait 
for
the node to continue booting, boot the node to multiuser mode, or halt the
node using the shutdown command. After all members are running in 
multiuser
mode or halted, you can rerun the clu_upgrade command.
*** Error ***
Member '2' appears to be booting or is in single-user mode. Either wait 
for
the node to continue booting, boot the node to multiuser mode, or halt the
node using the shutdown command. After all members are running in 
multiuser
mode or halted, you can rerun the clu_upgrade command.
--
I have no idea what's going on.. I haven't used rolling upgrade before. 
The "rolls_ver_lookup" in sysconfigtab is 0 on both nodes, and the 
runlevel is 3.
t:T
Received on Thu Nov 04 2004 - 14:32:53 NZDT

This archive was generated by hypermail 2.4.0 : Wed Nov 08 2023 - 11:53:45 NZDT