日本-日本語
日本HPホーム 製品 & サービス OpenVMS製品情報
≫  お問い合わせ


OpenVMS マニュアル


 

OpenVMS ドキュメント
ライブラリ

タイトルページ
目次
まえがき
第 1 章:TCP/IP Servicesのインストレーションとコンフィギュレーションを行う前の準備作業
第 2 章:TCP/IP Servicesのインストレーション
第 3 章:TCP/IP Servicesのコンフィギュレーション
第 4 章:IPv6のコンフィギュレーション
付録 A :TCP/IP Services の新規のインストレーションとコンフィギュレーションの例
索引
PDF
OpenVMS ホーム
HP TCP/IP Services for OpenVMS

HP TCP/IP Services for OpenVMS
インストレーション/ コンフィギュレーション・ガイド


目次 索引

付録 A
TCP/IP Services の新規のインストレーションとコンフィギュレーションの例

この付録では, TCP/IP Services 製品を一度もインストールしたことがないシステムでの, TCP/IP Services のインストレーションとコンフィギュレーションの例を示します。

A.1 新規のインストレーション・プロシージャの例

次の例は, TCP/IP Services のインストレーションでの対話のサンプルを示しています。この例では,インストレーションは,製品がまだインストールされていないシステムで行われています。 TCP/IP Services が以前にインストールされていたシスムでは,インストレーションでの対話がわずかに異なります ( 第 2 章 を参照)。

Choose one or more items from the menu separated by commas: 1 
 
The following product has been selected: 
    DEC AXPVMS TCPIP V5.6-xx               Layered Product 
 
Do you want to continue? [YES] [Return]
 
Configuration phase starting ... 
 
You will be asked to choose options, if any, for each selected product and for 
any products that may be installed to satisfy software dependency requirements. 
 
DEC AXPVMS TCPIP V5.6-xx: HP TCP/IP Services for OpenVMS. 
 
    Copyright 1976, 2006 Hewlett-Packard Development Company, L.P. 
 
    Hewlett-Packard Development Company, L.P. 
 
    HP TCP/IP Services for OpenVMS offers several license options. 
 
Do you want the defaults for all options? [YES] [Return]
 
Do you want to review the options? [NO] [Return]
 
Execution phase starting ... 
 
The following product will be installed to destination: 
    DEC AXPVMS TCPIP V5.6-xx             DISK$ALPHASYS:[VMS$COMMON.] 
 
 
Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90% 
%PCSI-I-PRCOUTPUT, output from subprocess follows ... 
% TCPIP-W-PCSI_INSTALL 
% - Execute SYS$MANAGER:TCPIP$CONFIG.COM to proceed with configuration of 
%   HP TCP/IP Services. 
% 
 
Portion done: 100% 
 
The following product has been installed: 
    DEC VAXVMS TCPIP V5.6-xx               Layered Product 
 
DEC VAXVMS TCPIP V5.6-xx: HP TCP/IP Services for OpenVMS. 
 
    Check the release notes for current status of the product. 
 
$ 



A.2 新規のコンフィギュレーション・プロシージャ

次の例は, TCP/IP Services のコンフィギュレーションでの対話のサンプルを示しています。この例では,次の構成要素のコンフィギュレーションが行われます。

  • コア環境

  • TELNET クライアント

  • FTP サーバ

この例では,コンフィギュレーションは,製品のコンフィギュレーションがまだ行われたことがないシステムで行われます。システムで以前に TCP/IP Services のコンフィギュレーションが行われたことがある場合,対話はわずかに異なります ( 第 3 章 を参照)。

 
 
 
        HP TCP/IP Services for OpenVMS Configuration Menu 
 
        Configuration options: 
 
                 1  -  Core environment 
                 2  -  Client components 
                 3  -  Server components 
                 4  -  Optional components 
 
                 5  -  Shutdown HP TCP/IP Services for OpenVMS 
                 6  -  Startup HP TCP/IP Services for OpenVMS 
                 7  -  Run tests 
 
                 A  -  Configure options 1 - 4 
                [E] -  Exit configuration procedure 
 
Enter configuration option: 1 
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
Enter configuration option: 1 
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
Enter configuration option: 1 
 
DOMAIN Configuration 
 
Enter Internet domain: yourdomain.com 
 
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
Enter configuration option: 2 
 
 
      HP TCP/IP Services for OpenVMS Interface & Address Configuration Menu 
 
 Hostname Details: Configured=Not Configured, Active=Not Configured 
 
 Configuration options: 
 
   1  -  WE0 Menu (EWA0: TwistedPair 100mbps) 
 
   2  -  IE0 Menu (EIA0: TwistedPair 100mbps) 
 
   3  -  IE1 Menu (EIB0: TwistedPair 100mbps) 
 
  [E] -  Exit menu 
 
Enter configuration option: 1 
 
 
      HP TCP/IP Services for OpenVMS Interface WE0 Configuration Menu 
 
 Configuration options: 
 
         1  - Add a primary address on WE0 
         2  - Add an alias address on WE0 
         3  - Enable DHCP client to manage address on WE0 
 
        [E] - Exit menu 
 
Enter configuration option: 1 
 
 
      HP TCP/IP Services for OpenVMS Interface WE0 Configuration Menu 
 
 Configuration options: 
 
         1  - Add a primary address on WE0 
         2  - Add an alias address on WE0 
         3  - Enable DHCP client to manage address on WE0 
 
        [E] - Exit menu 
 
Enter configuration option: 1 
 
    IPv4 Address may be entered with CIDR bits suffix. 
    E.g. For a 16-bit netmask enter 10.0.1.1/16 
 
Enter IPv4 Address []: 10.0.1.1/16 
Enter hostname []: yourmachine 
 
Requested configuration: 
 
      Address  : 10.0.1.1/16 
      Netmask  : 255.255.0.0 (CIDR bits: 16) 
      Hostname : yourmachine 
 
* Is this correct [YES]: [Return]
 
Added hostname yourmachine (10.0.1.1) to host database 
 
NOTE: 
  The system hostname is not configured. 
  It will now be set to yourmachine (10.0.1.1). 
  This can be changed later via the Interface Configuration Menu. 
 
Updated system hostname in configuration database 
 
Added address WE0:10.0.1.1 to configuration database 
 
 
      HP TCP/IP Services for OpenVMS Interface & Address Configuration Menu 
 
 Hostname Details: Configured=yourmachine, Active=Not Configured 
 
 Configuration options: 
 
   1  -  WE0 Menu (EWA0: TwistedPair 100mbps) 
   2  -  10.0.1.1/16         yourmachine           Configured 
 
   3  -  IE0 Menu (EIA0: TwistedPair 100mbps) 
 
   4  -  IE1 Menu (EIB0: TwistedPair 100mbps) 
 
  [E] -  Exit menu 
 
Enter configuration option: [Return]
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
Enter configuration option: 3 
 
 
DYNAMIC ROUTING Configuration 
 
 
        Dynamic routing has not been configured. 
 
        You may configure dynamic ROUTED or GATED routing. 
        You cannot enable both at the same time.  If you want 
        to change from one to the other, you must disable the 
        current routing first, then enable the desired routing. 
 
        If you enable dynamic ROUTED routing, this host will use the 
        Routing Information Protocol (RIP) - Version 1 to listen 
        for all dynamic routing information coming from other 
        hosts to update its internal routing tables. 
        It will also supply its own Internet addresses to 
        routing requests made from remote hosts. 
 
        If you enable dynamic GATED routing, you will be able to 
        configure this host to use any combination of the following 
        routing protocols to exchange dynamic routing information 
        with other hosts on the network: 
            Routing Information Protocol (RIP) - Version 1 & 2 
            Router Discovery Protocol (RDISC) 
            Open Shortest Path First (OSPF) 
            Exterior Gateway Protocol (EGP) 
            Border Gateway Protocol (BGP-4) 
            Static routes 
 
* Do you want to configure dynamic ROUTED or GATED routing [NO]: 
 
        A default route has not been configured. 
* Do you want to configure a default route [YES]: 
Enter your Default Gateway host name or address: yourgateway.yourdomain.com 
 
        yourgateway.yourdomain.com is not in the local host database. 
 
Enter Internet address for yourgateway.yourdomain.com: 10.0.2.1 
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
Enter configuration option: 4 
 
 
BIND RESOLVER Configuration 
 
        A BIND resolver has not been configured. 
 
        HP TCP/IP Services for OpenVMS supports the Berkeley Internet Name 
        Domain (BIND) resolver.  BIND is a network service that enables clients 
        to name resources or objects and share information with other objects 
        on the network. 
 
        Before configuring your system as a BIND resolver, you should 
        first be sure that there is at least one system on the network 
        configured as either a BIND primary or secondary server for 
        this domain. 
 
        You can specify a BIND server by its address or name; 
        however, if specified by name, an entry for it must 
        exist in the TCPIP$HOST database. 
 
        You will be asked one question for each server. 
        Press Return at the prompt to terminate the list. 
 
Enter your BIND server name: yourserver 
 
        yourserver is not in the local host database. 
 
Enter Internet address for yourserver: 10.0.2.2 
 
Enter next BIND server name: [Return]
 
 
        HP TCP/IP Services for OpenVMS Core Environment Configuration Menu 
 
        Configuration options: 
 
                 1  -  Domain 
                 2  -  Interfaces 
                 3  -  Routing 
                 4  -  BIND Resolver 
                 5  -  Time Zone 
 
                 A  -  Configure options 1 - 5 
                [E] -  Exit menu 
 
       HP TCP/IP Services for OpenVMS Configuration Menu 
 
 
        Configuration options: 
 
 
                 1  -  Core environment 
                 2  -  Client components 
                 3  -  Server components 
                 4  -  Optional components 
 
                 5  -  Shutdown HP TCP/IP Services for OpenVMS 
                 6  -  Startup HP TCP/IP Services for OpenVMS 
                 7  -  Run tests 
 
                 A  -  Configure options 1 - 4 
                [E] -  Exit configuration procedure 
 
Enter configuration option: 2 
 
 
      HP TCP/IP Services for OpenVMS Client Components Configuration Menu 
 
        Configuration options: 
 
 
                 1  -  DHCP Client      Disabled Stopped 
                 2  -  FTP Client       Disabled Stopped 
                 3  -  NFS Client       Disabled Stopped 
                 4  -  REXEC and RSH    Disabled Stopped 
                 5  -  RLOGIN           Disabled Stopped 
                 6  -  SMTP             Disabled Stopped 
                 7  -  SSH Client       Disabled Stopped 
                 8  -  TELNET           Disabled Stopped 
                 9  -  TELNETSYM        Disabled Stopped 
 
                 A  -  Configure options 1 - 9 
                [E] -  Exit menu 
 
Enter configuration option: 8 
 
TELNET Configuration 
 
Service is defined in the SYSUAF. 
Service is defined in the TCPIP$SERVICE database. 
Service is not enabled. 
Service is stopped. 
 
 
        TELNET configuration options: 
 
                 1 - Enable service on this node 
 
                 2 - Enable & Start service on this node 
 
                [E] - Exit TELNET configuration 
 
Enter configuration option: 2 
 
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$TELNET.EXE installed 
%TCPIP-I-INFO, logical names created 
%TCPIP-I-INFO, service enabled 
%TCPIP-S-STARTDONE, TCPIP$TELNET startup completed 
 
Press <ENTER > key to continue ... 
 
 
      HP TCP/IP Services for OpenVMS Client Components Configuration Menu 
 
        Configuration options: 
 
 
                 1  -  DHCP Client      Disabled Stopped 
                 2  -  FTP Client       Disabled Stopped 
                 3  -  NFS Client       Disabled Stopped 
                 4  -  REXEC and RSH    Disabled Stopped 
                 5  -  RLOGIN           Disabled Stopped 
                 6  -  SMTP             Disabled Stopped 
                 7  -  SSH Client       Disabled Stopped 
                 8  -  TELNET           Enabled  Started 
                 9  -  TELNETSYM        Disabled Stopped 
 
                 A  -  Configure options 1 - 9 
                [E] -  Exit menu 
 
 
 
Enter configuration option: [Return]
 
        HP TCP/IP Services for OpenVMS Configuration Menu 
 
        Configuration options: 
 
 
                 1  -  Core environment 
                 2  -  Client components 
                 3  -  Server components 
                 4  -  Optional components 
 
                 5  -  Shutdown HP TCP/IP Services for OpenVMS 
                 6  -  Startup HP TCP/IP Services for OpenVMS 
                 7  -  Run tests 
 
                 A  -  Configure options 1 - 4 
                [E] -  Exit configuration procedure 
 
 
Enter configuration option: 3 
 
 
HP TCP/IP Services for OpenVMS Server Components Configuration Menu 
 
  Configuration options: 
 
    1 - BIND         Disabled Stopped      12 - NTP          Disabled Stopped 
    2 - BOOTP        Disabled Stopped      13 - PC-NFS       Disabled Stopped 
    3 - DHCP         Disabled Stopped      14 - POP          Disabled Stopped 
    4 - FINGER       Disabled Stopped      15 - PORTMAPPER   Disabled Stopped 
    5 - FTP          Disabled Stopped      16 - RLOGIN       Enabled  Started 
    6 - IMAP         Disabled Stopped      17 - RMT          Disabled Stopped 
    7 - LBROKER      Disabled Stopped      18 - SNMP         Disabled Stopped 
    8 - LPR/LPD      Disabled Stopped      19 - SSH          Disabled Stopped 
    9 - METRIC       Disabled Stopped      20 - TELNET       Enabled  Started 
   10 - NFS          Disabled Stopped      21 - TFTP         Disabled Stopped 
   11 - LOCKD/STATD  Disabled Stopped      22 - XDM          Disabled Stopped 
 
 
    A  -  Configure options 1 - 22 
   [E] -  Exit menu 
 
Enter configuration option: 5 
 
FTP Configuration 
 
Service is defined in the SYSUAF. 
Service is defined in the TCPIP$SERVICE database. 
Service is not enabled. 
Service is stopped. 
 
        FTP configuration options: 
 
                 1 - Enable service on this node 
 
                 2 - Enable & Start service on this node 
 
                [E] - Exit FTP configuration 
 
 
Enter configuration option: 2 
 
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_CHILD.EXE installed 
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_SERVER.EXE installed 
%TCPIP-I-INFO, logical names created 
%TCPIP-I-INFO, service enabled 
%TCPIP-S-STARTDONE, TCPIP$FTP startup completed 
 
Press <ENTER > key to continue ... 
 
The FTP CLIENT is not enabled. 
 
* Do you want to configure FTP CLIENT [NO]: 
 
HP TCP/IP Services for OpenVMS Server Components Configuration Menu 
 
 
  Configuration options: 
 
 
    1 - BIND         Disabled Stopped      12 - NTP          Disabled Stopped 
    2 - BOOTP        Disabled Stopped      13 - PC-NFS       Disabled Stopped 
    3 - DHCP         Disabled Stopped      14 - POP          Disabled Stopped 
    4 - FINGER       Disabled Stopped      15 - PORTMAPPER   Disabled Stopped 
    5 - FTP          Enabled  Started      16 - RLOGIN       Enabled  Started 
    6 - IMAP         Disabled Stopped      17 - RMT          Disabled Stopped 
    7 - LBROKER      Disabled Stopped      18 - SNMP         Disabled Stopped 
    8 - LPR/LPD      Disabled Stopped      19 - SSH          Disabled Stopped 
    9 - METRIC       Disabled Stopped      20 - TELNET       Enabled  Started 
   10 - NFS          Disabled Stopped      21 - TFTP         Disabled Stopped 
   11 - LOCKD/STATD  Disabled Stopped      22 - XDM          Disabled Stopped 
 
    A  -  Configure options 1 - 22 
   [E] -  Exit menu 
 
 
Enter configuration option: [Return]
 
 
        HP TCP/IP Services for OpenVMS Configuration Menu 
 
        Configuration options: 
 
                 1  -  Core environment 
                 2  -  Client components 
                 3  -  Server components 
                 4  -  Optional components 
 
                 5  -  Shutdown HP TCP/IP Services for OpenVMS 
                 6  -  Startup HP TCP/IP Services for OpenVMS 
                 7  -  Run tests 
 
                 A  -  Configure options 1 - 4 
                [E] -  Exit configuration procedure 
 
Enter configuration option: 6 
 
Begin Startup... 
 
 
%TCPIP-I-INFO, TCP/IP Services startup beginning at 22-JUN-2006 09:18:20.58 
%TCPIP-I-NORMAL, timezone information verified 
 
%RUN-S-PROC_ID, identification of created process is 00000896 
%TCPIP-I-SETLOCAL, setting domain and/or local host 
%TCPIP-I-STARTCOMM, starting communication 
%TCPIP-I-SETPROTP, setting protocol parameters 
%TCPIP-I-DEFINTE, defining interfaces 
%TCPIP-I-STARTNAME, starting name service 
%TCPIP-S-STARTDONE, TCP/IP Kernel startup completed 
%TCPIP-I-NOSERVICES, no services configured for startup 
%TCPIP-I-PROXYLOADED, loaded 0 NFS proxy records 
%TCPIP-I-LOADSERV, loading TCPIP server proxy information 
%TCPIP-I-SERVLOADED, auxiliary server loaded with 0 proxy records 
-TCPIP-I-SERVSKIP, skipped 0 communication proxy records 
-TCPIP-I-SERVTOTAL, total of 0 proxy records read 
%TCPIP-S-STARTDONE, TCPIP$PROXY startup completed 
%TCPIP-S-STARTDONE, TCP/IP Services startup completed at 22-JUN-2006 09:18:23.54 
 
Startup request completed. 
Press <ENTER > key to continue ...[Return]
 
 
        HP TCP/IP Services for OpenVMS Configuration Menu 
 
        Configuration options: 
 
                 1  -  Core environment 
                 2  -  Client components 
                 3  -  Server components 
                 4  -  Optional components 
 
                 5  -  Shutdown HP TCP/IP Services for OpenVMS 
                 6  -  Startup HP TCP/IP Services for OpenVMS 
                 7  -  Run tests 
 
                 A  -  Configure options 1 - 4 
                [E] -  Exit configuration procedure 
 
Enter configuration option: E 


索引 目次

© 2012 Hewlett-Packard Development Company, L.P.