This chapter describes the RTR monitor and provides examples of its use with the CLI interface. Displays with the browser interface contain the same information in a comparable format.

The RTR monitor lets you view the activities of RTR and your applications. Many different aspects of RTR's behavior can be viewed, allowing the activities and performance of RTR to be analyzed.

7.1 Introduction

It can be used to check the correct operation of an RTR network, showing information useful for tuning, capacity planning, and locating configuration and application errors.

The information displayed is composed of named data items which are continuously updated by RTR. These data items can be displayed in various formats and combined using simple arithmetic operators and constants.

The monitor is invoked with the MONITOR command. MONITOR displays a monitor picture that is periodically updated. See Section 8.2 for the full syntax of the MONITOR command.

A monitor picture contains elements that are either text (such as labels and titles) or variables derived from data items. Monitor pictures can be defined either interactively at the RTR> prompt or defined in a file called a monitor file.

You can use monitor files provided with RTR and you can create your own. See Appendix A for information about creating monitor files.

7.2 Standard Monitor Pictures

A number of standard monitor pictures are supplied with RTR. These cover most of the usual monitoring requirements. You may define your own monitor pictures or alter the standard ones to suit your particular needs. Table 7-1 contains a list of the standard monitor pictures. To display one of these pictures, use the following command at the RTR prompt:

RTR> MONITOR picture-name

The files for standard monitor pictures are installed on your system when RTR is installed. The location of these files is platform specific. The file names are the picture name appended with .mon . Type the file name without .mon when starting the display.

See Chapter 8, RTR Commands, for more information on the MONITOR command.

Table 7-1 Standard Monitor Pictures

Picture name	Description
accfail	Shows link transport name for links on which a connection attempt was declined, with a reason for failure. The most recent entry is highlighted.
acp2app	Displays counts of messages and number of bytes from RTRACP to the application, as viewed from a specific node.
active	Displays a list of RTR processes, and for each process the number of transactions they have started, the number of transactions they have completed and the number of transactions that are still active.
app2acp	Displays counts of messages and number of bytes from the application to RTRACP, as viewed from a specific node.
appdelay	Displays counts of flow-control induced traffic stalls by application process.
broadcast	Displays information about RTR user events by process, including number of user events enqueued, received, and discarded.
calls	Displays the total number of RTR API calls and their success or failure for the processes on all the nodes being monitored. All RTR messages are also shown by message type. (Pending messages are those that an application has not received yet). Use the /IDENTIFICATION=process-id qualifier to display the values for one specific process, otherwise the total values for all processes are displayed.
channel	Displays the roles of the channels declared by an application. This can be useful as a debugging tool in the early stages of application development.
connects	Displays connection status summary, including the number of links up and down, and a list of links with state (up or down), architecture, network transport, and fail-reason, if any.
ctccalls	Displays the history of calls for a specific client transaction controller.
downstream	Displays counts of downstream flow-control induced traffic stalls.
event	Displays event routing data by facility. Information includes events in transit and destination information showing number of events enqueued, processed, and discarded.
fastrecovery	Displays the number of transactions recovered during optimized shadow recovery.
flow	Displays the flow control counters.
flostalls	Displays counts of flow-control induced traffic stalls.
frontend	Displays frontend status and counts by node and facility, including frontend state, current router, reject status, retry count, and quorum rejects.
group	Shows server and transaction concurrency by partition.
ipc	Shows counts of interprocess communication (IPC) activity in the RTR ACP and active RTR applications.
ipcrate	Displays rate information on IPC messages, byte counts, and I/O primitive usage.
jcalls	Displays counts of successful (success), failed (fail) and total journal calls for local and remote journals.
jhuse	Displays bar graphs of Maximum, Allocated, In Use and Peak usage for local and standby journals using the browser interface. Provides the same information as the juse monitor picture.
jnlhtml	Displays detail for local and standby journal usage with the browser interface. Data are the same as from the MONITOR JOURNAL CLI command.
journal	Displays detail for local and standby journal usage. Includes counts of the number of blocks in use, percent of journal used, number of blocks, top blocks, blocks available, transaction (tx) entries, transaction records, memory bytes, disk reads, blocks read, disk writes, blocks written, entries total, records total, records read, record bytes read, non-transaction entries and open journals. Also provides bar graphs that show usage of journal blocks as a percent of the total.
juse	Displays bar graphs of Maximum, Allocated, In Use and Peak usage for local and standby journals.
link	Displays a number of per-link data items. Use the /LINK=link-name qualifier to display the values for one specific link, otherwise the total values for all links are displayed.
netbytes	Displays a list of the links to other nodes. For each link, the total number of bytes received and sent on that link and the number of bytes received and sent per second are displayed.
netstat	Displays for each link the connection status in detail, with the link state (up or down), and architecture type of remote node (such as VAX, I386, Alpha, and so on).
ortr	Displays a list of server/client transaction controllers.
partit	Displays the status of server partitions. Shows the partition identifiers, key ranges and key segments, and the status of the servers (active, recovering and so on).
queues	Shows transaction queues on a partition basis.
quorum	Tracks (by facility) the configuration, reachability, and quorum status of one or more nodes.
recovery	Displays the status of server recovery procedures, such as waiting for quorum, catching up transactions, and so on.
rejects	Displays the last rtr_mt_rejected message received by each running process.
rejhist	Displays the last 10 rtr_mt_rejected messages received by the selected process.
response	Displays the elapsed time that a transaction has been active on the opened channels of a process.
rolequor	Displays a detailed picture of the various data items in the QUORUM picture, separated by roles. If a quorum problem is encountered, this picture may be useful for problem diagnosis.
routers	Displays information on a router node. It gives an indication of the utilization of the router in terms of transactions and broadcasts routed through this node. Useful to monitor performance or locate problems.
routing	Displays statistics of transaction and broadcast traffic by facility.
rscbe	Displays the most recent call's history for the RSC subsystem on a backend node.
stalls	Displays in real time any network links currently stalling in their outbound traffic, and provides a history of the stalls that the various links encountered during their lifetime.
stccalls	Displays a history of calls for a specified server transaction controller.
summary	Displays channel, transaction, and system environmental information.
system	Displays the state of critical resources within the RTR environment. If a resource has exceeded a predefined threshold, a warning indicator is displayed.
tps	Displays the rate of transaction commits performed by each process using RTR.
tpslo	Displays low end of the rate of transaction commits performed by each process using RTR.
traffic	Displays a list of the links to other nodes. Shown for each link are: byte rate, packet rate, message rate and congestion, in both directions. Average packets per second is also shown.
trans	Displays transactions for a frontend, router and backend.
upstream	Displays upstream flow-control-induced traffic stalls.
v2calls	Shows RTR Version 2 verb usage through the interoperability subsystem. The screen layout is identical to the RTR Version 2 Monitor Call's picture.
xa	Displays XA counter information including success and failure as well as call and read-only counters.

The following sections describe the more commonly used standard monitor pictures in detail.

7.2.1 Monitor Accfail

Displays link acceptance failures. When configuring RTR, nodes can sometimes fail to connect. Although the cause of the error can be viewed on the initiator side with the MONITOR NETSTAT picture, it can be difficult to pinpoint the problem when looking at the other end of the link. Use the MONITOR ACCFAIL picture to display the reason for the local node's refusal to accept connections.

Example 7-1 Monitor Accfail

================================================================================ U n a c c e p t a b l e L i n k s Most recent links on which a connection attempt was declined Node: NODE11 Wed Jan 7 1998 10:51:00 -------------------------------------------------------------------------------- Link Transport Name(s) Reason for failure -------------------------------------------------------------------------------- nodef node is not configured for the facility marke.zko.dec.com node not recognized real1 facility name not matched MARKE DEC:.ZKO.MARKE node not recognized nodef node is not configured for the facility marke.zko.dec.com node not recognized real1 facility name not matched nodez node role definitions do not match for real1 facility name not matched MARKE DEC:.ZKO.MARKE node not recognized -------------------------------------------------------------------------------- List entries are reused in a cyclical fashion; the most recent entry is highlighted. ================================================================================

Errors that can be displayed by ACCFAIL include:

• RTR_STS_NOTRECOGNISED - "node not recognized"
  The local node has received a connection request over a link that is not configured in any facility on the local machine. If you expected the connection to succeed as the result of having a template link defined, check carefully the names displayed in the monitor picture. These are the names obtained from the network transport over which the link connection attempt was received, and it is with these that a match with a template (wildcard specification) link must succeed. Remember that the name match is performed in a case-sensitive manner. Names corresponding to TCP links may or may nor contain your domain name, depending on how the name is entered in either your local hosts file or name server. DECnet-Plus systems may yield both a pseudonym and a link name; both are checked for a match with a template.
• RTR_STS_FACNOTDEC - "facility name not matched"
  The connecting link is configured, but the facility that it requests does not exist on the local node.
• RTR_STS_NODENOTCNFG - "node is not configured for the facility"
  The connecting link is configured on the local node, but not as part of the requested facility.
• RTR_STS_ROLESMISMATCH - "node role definitions do not match for this facility"
  The connecting link is configured in the requested facility, but with a different role configuration on the local node.
• RTR_STS_TRNOQUO - "router has no quorum in facility %s"
  The router is unable to accept frontend connections since it is not quorate. This condition will clear up automatically as soon as the router gains connections to sufficient backends.

Displays counts of messages and number of bytes from RTRACP to the application, as viewed from a specific node. Includes opened, closed, msg1, msg1_uncertain, msgn, reply (reply to client), rettosend (return to sender), accepted, prepared, rejected, user_event, rtr_event, prepare, request_info , and set_info messages as appropriate. For receive_message and user_wakeup , displays calls, active, fail, and timeout counts. Refer to the Reliable Transaction Router C Application Programmer's Reference Manual for an explanation of the message types.

The default is to display information on all PIDs, process names, and images. To display information on one process only, use the qualifier /IDENTIFICATION= process-id .

Example 7-2 Monitor Acp2app

RTR ACP to Application Messages, Node: NodeA PID: 1568 Process name: -ALL- Image: -ALL- 14:15:46 Tue Dec 04 2001 Message Type Client Server Other Pend # Bytes # Bytes # Bytes # opened 4 760 3 38 0 0 8 closed 0 0 1 136 43492 295745 1 msg1 0 170 2 msg1_uncertain 0 0 0 msgn 0 253 3 reply 0 0 0 0 0 rettosend 0 0 0 prepared 0 0 0 accepted 0 0 0 0 0 rejected 0 0 0 68 1 user_event 0 0 0 0 0 rtr_event 0 0 0 0 0 prepare 0 0 0 Other request_info 43347 5211764 0 set_info 0 0 0 Calls Active Fail Timeout receive_message 88607 1 1759 1759 user_wakeup 0 0

7.2.3 Monitor Active

Displays a list of RTR processes, and for each process the number of transactions they have started, the number of transactions they have completed, and the number of transactions still active.

OpenVMS systems show actual process names; on Windows and UNIX systems RTR produces a process name by combining user name and image name.

Example 7-3 Monitor Active

ACTIVE TRANSACTIONS BY PROCESS Fri Mar 12 1999 19:32:41 Starts Complete Active Display totals: 5 5 0 Node ID Process name Image name NodeA 11141 SMITH_1 DISK01:[SMITH]RTR 5 5 0

7.2.4 Monitor App2acp

The default is to display counts for all PIDs and processes, for client, server, and other roles.

Example 7-4 Monitor App2acp

RTR Application to ACP Messages, Node: NodeA PID: 1568 Process name: -ALL- Image: -ALL- 14:21:19 Tue Dec 04 2001 RTR Message Type Client Server Other # Bytes # Bytes # Bytes open_channel 11 8228 7 5376 0 0 close_channel 5 120 3 72 0 0 prepare_tx 0 0 accept_tx 0 0 0 0 reject_tx 0 0 0 0 broadcast_event 1 81 0 0 start_tx 2 0 send_to_server 5 548 reply_to_client 0 0 request_info 43768 16015270 set_info 0 0

7.2.5 Monitor Appdelay

Example 7-5 Monitor Appdelay

FLOW CONTROL STALLS BY PROCESS Tue Dec 04 2001 15:38:37, NODE: rtrdoc Txn traffic stalls Bdcst traffic stalls KBytes PID Process Name reqs times secs max reqs times secs max sent Total * 1 0 0 0 1 0 0 0 45528 1568 user rtr 1 0 0 0 1 0 0 0 45528