日本語 Compaq DECwindows Motif for OpenVMS
インストレーション・ガイド

前へ 次へ 目次

A.5.4 問題の確認と報告

DECwindows Motifを使用していて問題が発生した場合は，弊社にご連絡ください。保証の詳細については，『ソフトウェア仕様書』で確認してください。保証期間中に問題が発生した場合は，次の選択があります。

A.6 POLYCENTERソフトウェア・インストレーション・ユーティリティを使用したインストレーション実行例

この付録では，次のOpenVMSのシステムに Compaq DECwindows Motif for OpenVMS V1.2--6 ソフトウェアをインストールする実行例を紹介します。

POLYCENTERソフトウェア・インストレーション(PCSI) ユーティリティを使用して Compaq DECwindows Motif for OpenVMS V1.2--6 ソフトウェアをインストールする方法と手順についての詳細は， 付録 A.2 節 を参照してください。

ここに示すインストレーション実行例では，省略時のディレクトリを， PCSI ECO および DECwindows Motif セーブセットの入っているデバイス名およびディレクトリに設定していることを想定しています。 PCSI ECO は V7.2よりも前の OpenVMSのサポート・バージョンでのみ必要です。この ECO についての詳細は，『Guide to the Compaq DECwindows Motif for OpenVMS CD-ROM』を参照してください。

A.6.1 OpenVMS Alpha V7.1--2システムへのインストレーション実行例

例 A_4 は，必須 PCSI ECOのインストレーション実行例です。 例 A-5 は，十分なシステム・リソースのある OpenVMS Alphaバージョン 7.1--2オペレーティング・システムに Compaq DECwindows Motif for OpenVMS V1.2--6 をインストールする実行例です。

例 A-4 OpenVMS AlphaシステムへPCSI用必須ECOをインストールする実行例 

 
          Welcome to the OpenVMS Alpha Operating System, Version 7.1
 
$ PRODUCT INSTALL VMS62TO71U2_PCSI [Return]
 
The following product has been selected:
    DEC AXPVMS VMS62TO71U2_PCSI V1.0        Patch (maintenance update)
  
Do you want to continue? [YES] [Return]
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
 
DEC AXPVMS VMS62TO71U2_PCSI V1.0
 
* This product does not have any configuration options.
 
Execution phase starting ...
 
The following product will be installed to destination:
    DEC AXPVMS VMS62TO71U2_PCSI V1.0        DISK$2:[VMS$COMMON.]
 
Portion done: 0%
...10%
...20%
...40%
...50%
...80%
...90%
...100%
 
The following product has been installed:
    DEC AXPVMS VMS62TO71U2_PCSI V1.0        Patch (maintenance update)

例 A-5 十分なシステム・リソースのあるOpenVMS Alpha V7.1--2システムでDECwindows Motif をアップグレードする実行例 

$ PRODUCT INSTALL DWMOTIF [Return]
 
The following product has been selected:
    DEC AXPVMS DWMOTIF V1.2-6              Layered Product
 
Do you want to continue? [YES] [Return]
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
 
DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
 
    Copyright 2000 Compaq Computer Corporation
 
    Compaq Computer Corporation
 
    This product uses the PAK: DW-MOTIF
 
Checking values of system parameters...
                                      OK
 
Do you want the defaults for all options? [YES] [Return]
 
    If a Local Language Variant is installed, refer to the Installation Guide.
 
    Do you want to continue? [YES] [Return]
 
Do you want to review the options? [NO] Y [Return]
 
DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
    DEC AXPVMS VMS V7.1 [Installed]
    Install New Desktop: YES
      Install Manual (reference) pages for the New Desktop: YES
      Make the New Desktop the default desktop: YES
    Install traditional DECwindows Desktop: YES
    Programming Support for the C Language: YES
    Programming Support for the Pascal Language: YES
    Programming Support for the FORTRAN Language: YES
    Programming Support for the New Desktop: YES
    Programming examples: YES
      Sound example files: YES
            Programming examples for DECwindows: YES
      Programming examples for the New Desktop: YES
 
Are you satisfied with these options? [YES]  [Return]
 
Execution phase starting ...
 
The following product will be installed to destination:
    DEC AXPVMS DWMOTIF V1.2-6              DISK$2:[VMS$COMMON.]
The following product will be removed from destination:
    DEC AXPVMS DWMOTIF V1.2-5              DISK$2:[VMS$COMMON.]
 
 
Portion done: 0%
...10%
...20%
...30%
...40%
...50%
...60%
...70%
...80%
...90%
 
  **** DECwindows Motif application and run-time support files DETECTED ****
 
  **** DECwindows device support files DETECTED ****
 
...100%
 
The following product has been installed:
    DEC AXPVMS DWMOTIF V1.2-6              Layered Product
The following product has been removed:
    DEC AXPVMS DWMOTIF V1.2-5              Layered Product
 
DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
 
    System reboot will be required following upgrade of language variants.
 
    Installation Verification Procedure can be run after reboot.
$ Logout [Return]

A.6.2 OpenVMS VAX V7.1システムへのインストレーションの実行例

例 A-6 は，十分なシステム・リソースのある OpenVMS VAX V7.1システムへ Compaq DECwindows Motif for OpenVMS V1.2--6 をインストールする実行例です。

例 A-6 十分なシステム・リソースのあるOpenVMS VAX V7.1システムで Compaq DECwindows Motif for OpenVMS V1.2--6をアップグレードする実行例 

The following product has been selected:
    DEC VAXVMS DWMOTIF V1.2-6              Layered Product
 
Do you want to continue? [YES] 
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
 
DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif
 
 Copyright 2000 Compaq Computer Corporation
 
    Compaq Computer Corporation
 
    This product uses the PAK: DW-MOTIF
 
Checking values of system parameters...
  %DECW-W-BADVALUE, SYSGEN parameter PQL_MBYTLM is 40000, should be at least 48000
 
  The installation procedure has determined that some system parameter values
  require modification to install the DECwindows Motif Version 1.2-6 for
  OpenVMS software.
 
  Please type the following command to run AUTOGEN and reboot your system
  before restarting the DECwindows installation.  This will set the system
  parameters to appropriate values for running DECwindows Motif V1.2-6.
 
        @SYS$UPDATE:AUTOGEN GETDATA REBOOT CHECK_FEEDBACK
 
The DECwindows installation is being terminated.
 
Please run AUTOGEN and restart the installation.
 
%PCSI-E-S_OPFAIL, operation failed
%PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition
 
  SYSTEM       logged out at 20-NOV-2000 17:03:49.25

ここでAUTOGENを実行して、インストレーションを再開します。 


The following product has been selected:
    DEC VAXVMS DWMOTIF V1.2-6              Layered Product
 
Do you want to continue? [YES]
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency 
requirements.
 
DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif
 
Copyright 2000 Compaq Computer Corporation
 
    Compaq Computer Corporation
 
    This product uses the PAK: DW-MOTIF
 
Checking values of system parameters...
 
                                       OK
 
Do you want the defaults for all options? [YES] 
 
    If a Local Language Variant is installed, refer to the Installation Guide.
 
   Do you want to continue? [YES]
 
Do you want to review the options? [NO]Y [Return]
 
DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif
    DEC VAXVMS VMS V7.1 [Installed]
    DECwindows Motif runtime support files: YES
          Programming Support for the C Language: YES
    Programming Support for the FORTRAN Language: YES
    Programming Support for the Pascal Language: YES
    Programming examples: YES
 
Are you satisfied with these options? [YES][Return]
Execution phase starting ...
 
The following product will be installed to destination:
    DEC VAXVMS DWMOTIF V1.2-6              DISK$VAX71_124_P2:[VMS$COMMON.]
The following product will be removed from destination:
    DEC VAXVMS DWMOTIF V1.2-5              DISK$VAX71_124_P2:[VMS$COMMON.]
 
Portion done: 0%
...10%
...20%
...30%
...40%
...50%
...60%
...70%
...80%
...90%
 
  **** DECwindows Motif application and run-time support files DETECTED ****
  **** DECwindows device support files DETECTED ****
 
...100%
 
The following product has been installed:
    DEC VAXVMS DWMOTIF V1.2-6              Layered Product
The following product has been removed:
    DEC VAXVMS DWMOTIF V1.2-5              Layered Product
 
DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif
 
    System reboot will be required following upgrade of language variants.
 
    Installation Verification Procedure can be run after reboot.
       DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif
 
    System reboot will be required following upgrade of language variants.
    Installation Verification Procedure can be run after reboot.

A.6.3 OpenVMS Alpha V6.2システムへのインストレーションの実行例

例 A-7 は，PCSIユーティリティ用の必須ECOのインストレーション実行例です。 例 A-8 は，十分なシステム・リソースのある OpenVMS Alpha V6.2オペレーティング・システムに Compaq DECwindows Motif for OpenVMS V1.2--6 をインストールする実行例です。

例 A-7 OpenVMS Alpha システムへPCSI用必須ECOをインストールする実行例 

The following product has been selected:
DEC AXPVMS VMS62TO71U2_PCSI V1.0
 
Do you want to continue? [YES]  [Return]
 
*** DEC AXPVMS VMS62TO71U2_PCSI V1.0
 
%PCSIUI-I-DONEASK, execution phase starting
The following product will be installed:
DEC AXPVMS VMS62TO71U2_PCSI V1.0
%PCSI-I-VOLINFO, estimated space information for volume DISK$2
-PCSI-I-VOLSPC, -331 required; 2851892 available; 2852223 net
 
Portion Done: 0%
...10%
...40%
...80%
...90%
...100%
The following product has been installed:
DEC AXPVMS VMS62TO71U2_PCSI V1.0

例 A-8 十分なシステム・リソースがないOpenVMS Alpha システムでDECwindows Motif をアップグレードする実行例 

$ PRODUCT INSTALL DWMOTIF [Return]
 
 
The following product has been selected:
    DEC AXPVMS DWMOTIF V1.2-6              Layered Product
 
Do you want to continue? [YES] [Return]
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and
for any products that may be installed to satisfy software dependency
requirements.
 
DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
 
    Copyright 2000 Compaq Computer Corporation
 
    Compaq Computer Corporation
 
    This product uses the PAK: DW-MOTIF
 
Checking values of system parameters...
%DECW-W-BADVALUE, SYSGEN parameter GBLPAGES is 110000, should be at least 150000
%DECW-W-BADVALUE, SYSGEN parameter NPAGEDYN is 1867776, should be at least 1998848
 
  The installation procedure has determined that some system parameter values
  require modification to install the DECwindows Motif Version 1.2-6 for
  OpenVMS software.
 
  Please type the following command to run AUTOGEN and reboot your system
  before restarting the DECwindows installation.  This will set the system
  parameters to appropriate values for running DECwindows Motif V1.2-6.
 
        @SYS$UPDATE:AUTOGEN GETDATA REBOOT CHECK_FEEDBACK
 
 
The DECwindows installation is being terminated.
 
Please run AUTOGEN and restart the installation.
 
%PCSI-E-S_OPFAIL, operation failed
%PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition

ここでAUTOGENを実行して、インストレーションを再開します。 


 
The following product has been selected:
    DEC AXPVMS DWMOTIF V1.2-6              Layered Product
 
Do you want to continue? [YES] [Return]
 
Configuration phase starting ...
 
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency
requirements.
 DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
 
    Copyright 2000 Compaq Computer Corporation
 
    Compaq Computer Corporation
 
    This product uses the PAK: DW-MOTIF
 
Checking values of system parameters...
 
                                       OK
 
Do you want the defaults for all options? [YES] [Return]
 
    If a Local Language Variant is installed, refer to the Installation Guide.
 
    Do you want to continue? [YES] [Return]
 
Do you want to review the options? [NO] Y [Return]
 
DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
    DEC AXPVMS VMS V6.2-1H3 [Installed]
       Install New Desktop: YES
      Install Manual (reference) pages for the New Desktop: YES
      Make the New Desktop the default desktop: YES
    Install traditional DECwindows Desktop: YES
    Programming Support for the C Language: YES
    Programming Support for the Pascal Language: YES
    Programming Support for the FORTRAN Language: YES
    Programming Support for the New Desktop: YES
    Programming examples: YES
      Sound example files: YES
      Programming examples for DECwindows: YES
      Programming examples for the New Desktop: YES
 
Are you satisfied with these options? [YES] [Return]
 
Execution phase starting ...
 
The following product will be installed to destination:
    DEC AXPVMS DWMOTIF V1.2-6              DISK$2:[VMS$COMMON.]
The following product will be removed from destination:
    DEC AXPVMS DWMOTIF V1.2-5              DISK$2:[VMS$COMMON.]
    Portion done: 0%
...10%
...20%
...30%
...40%
...50%
...60%
...70%
...80%
...90%
 
  **** DECwindows Motif application and run-time support files DETECTED ****
 
 
  **** DECwindows device support files DETECTED ****
 
...100%
 
The following product has been installed:
    DEC AXPVMS DWMOTIF V1.2-6              Layered Product
The following product has been removed:
    DEC AXPVMS DWMOTIF V1.2-5              Layered Product
  DEC AXPVMS DWMOTIF V1.2-6: DECwindows Motif
 
    System reboot will be required following upgrade of language variants.
 
    Installation Verification Procedure can be run after reboot.

A.7 VMSINSTALを使用したインストレーション実行例

この付録では，VMSINSTALを使用したインストレーションの実行例を紹介します。

A.7.1 VMSINSTALを使用した OpenVMS VAX V5.5--2へのインストレーション実行例

例 A-9 は，VMSINSTALプロシージャを使用して OpenVMS VAX V5.5-2へ Compaq DECwindows Motif for OpenVMS V1.2--6 をインストールする実行例です。インストレーション実行例は，システムにログインしているユーザがいないこと，リリース・ノートを表示するOPTIONS Nが指定されていることを前提としています。

例 A-9 VMSINSTALを使用したインストレーション実行例 

$ @SYS$UPDATE:VMSINSTAL DWMOTIFVAXU6012 
 
        VAX/VMS Software Product Installation Procedure V5.5-2 
 
 
It is 26-MAR-2000 at 10:36. 
 
Enter a question mark (?) at any time for help. 
 
* Are you satisfied with the backup of your system disk [YES]? [Return]
* Where will the distribution volumes be mounted: DAD2:[000000][Return]
Enter the products to be processed from the first distribution volume set. 
* Products: dwmotifvaxu6012 [Return]
* Enter installation options you wish to use (none): [Return] 
The following products will be processed: 
 
  DWMOTIFVAXU6 V1.2 
 
 
        Beginning installation of DWMOTIFVAXU6 V1.2 at 10:36 
 
%VMSINSTAL-I-RESTORE, Restoring product save set A ... 
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. 
 
        *** Installing DECwindows Motif for OpenVMS VAX software *** 
 
  Copyright 2000 Compaq Computer Corporation 
 
  COMPAQ Registered in U.S. Patent and Trademark Office. 
 
  Confidential computer software. Valid license from Compaq or authorized 
  sublicensor required for possession, use , or copying. Consistent with 
  FAR 12.211 and 12.212, Commercial Computer Software, Computer Software 
  Documentation, and Technical Data for Commercial Items are licensed 
  to the U.S. Government under vendor's standard commercial license. 
 
  You can install the DECwindows Motif kit completely or in selected 
  portions.  A complete installation requires as many as 68,400 blocks. 
  If you choose to perform a partial installation, you can select 
  (tailor) the programming support files that support your DECwindows 
  Motif application development.  Whether you perform a complete or partial 
  installation, this kit provides support for running DECwindows Motif 
  applications on OpenVMS compute servers. 
 
* Do you want to install the entire kit [Y]? No [Return] 
  This installation procedure provides support files for developing 
  DECwindows Motif applications in several programming languages.  These 
  files are needed only to develop applications and are not required to run 
  DECwindows Motif applications.  The free disk space requirement for each 
  programming support file ranges from 3000 to 8000 blocks. 
 
* Do you want to install DECwindows Motif programming support [Y]? [Return] 
  Support files are supplied for the following OpenVMS programming languages: 
 
  FORTRAN, Pascal 
 
  In addition, support files are supplied for programming in the C language 
  using conventions and standards developed at the Massachusetts Institute 
  of Technology. 
 
* Do you want to install all programming language support files [Y]? [Return] 
* Do you want to install DECwindows Motif programming examples [Y]? [Return] 
  You have selected the following portions of the kit: 
 
        o  DECwindows Motif Applications and Run-time Libraries 
 
        o  DECwindows Motif programming examples 
 
        o  DECwindows Motif programming support 
                FORTRAN, Pascal 
                MIT C language programming conventions 
 
* Are these selections correct [Y]? [Return] 
  A registered and loaded product authorization key for DW-MOTIF is 
  required to run any DECwindows Motif for OpenVMS application. If you 
  answer NO to the next question, the installation of DECwindows Motif for 
  OpenVMS will be terminated. 
 
 
        Product:      DW-MOTIF 
        Producer:     DEC 
        Version: 
        Release Date: 
 
 
* Does this product have an authorization key registered and loaded? Yes [Return]
  DECwindows Motif will not start if your system parameters are not 
  correct. 
 
  o If you allow a system shutdown, the installation procedure will 
    reboot the system at the end of the installation.  If your system 
    parameters are incorrect, the installation will run AUTOGEN prior 
    to the system reboot. 
 
  o If you do not allow a system shutdown, the installation procedure 
    will continue, and you will be informed at the end of the 
    installation whether you need to modify your system parameters in 
    order to start DECwindows Motif. 
 
 
    To complete the installation of this product, you should reboot 
    the system.  If it is not convenient to reboot at this time, then 
    enter NO to the following question. 
 
    If you enter NO, the installation procedure will continue. 
 
* Will you allow a system shutdown after this product is installed [YES]? No [Return]
  No further questions will be asked. 
 
%VMSINSTAL-I-RESTORE, Restoring product save set B ... 
%VMSINSTAL-I-RESTORE, Restoring product save set C ... 
%VMSINSTAL-I-RESTORE, Restoring product save set D ... 
%VMSINSTAL-I-RESTORE, Restoring product save set E ... 
%VMSINSTAL-I-RESTORE, Restoring product save set F ... 
%VMSINSTAL-I-RESTORE, Restoring product save set G ... 
%VMSINSTAL-I-RESTORE, Restoring product save set H ... 
%VMSINSTAL-I-RESTORE, Restoring product save set I ... 
%VMSINSTAL-I-RESTORE, Restoring product save set J ... 
%VMSINSTAL-I-RESTORE, Restoring product save set L ... 
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... 
 
  You may safely ignore the following NCP error message(s): 
 
%NCP-I-SUCCESS,  Success 
Object = X$X0 
%NML-I-RECDELET, Database entry deleted 
 
  The Installation Verification Procedure (IVP) should be run after the 
  installation has been completed and DECwindows Motif has been restarted. 
  The IVP can be found in SYS$TEST:DECW$IVP.COM. 
 
  The installation procedure has determined that your system parameters are 
  set correctly and that it will not be necessary to run AUTOGEN or reboot 
  the system. 
 
  If your system is already running DECwindows Motif, restart DECwindows 
  Motif with the following DCL command: 
 
       $ @SYS$MANAGER:DECW$STARTUP RESTART 
 
  If your system is NOT already running DECwindows Motif, start DECwindows 
  Motif with the following DCL command: 
 
       $ @SYS$MANAGER:DECW$STARTUP 
 
                            * * * N O T E * * * 
 
  If you are installing DECwindows Motif from your workstation console, log 
  off after you enter the command to start DECwindows Motif. 
 
 
  The installation procedure has determined that your system parameter values 
  are acceptable.  A reboot of the system is not required. 
 
 
        Installation of DWMOTIFVAXU6 V1.2 completed at 10:57 
 
Enter the products to be processed from the next distribution volume set. 
* Products: [Return]
    VMSINSTAL procedure done at 12:45

A.8 ソフトウェア構成要素

POLYCENTERソフトウェア・インストレーション(PCSI) ユーティリティを使用して Compaq DECwindows Motif for OpenVMS V1.2--6 をインストールした場合は，インストールされているファイルとファイルのインストール先ディレクトリとサブディレクトリのリストを確認することができます。

このリストを呼び出すには，次のPCSIコマンドを入力してください。 


$ PRODUCT SHOW OBJECT/product=dwmotif

次は，コマンドの出力結果の例です。 


OBJECT                                   OBJECT TYPE 
------                                   ----------- 
[000000]                                 directory 
[000000]DEC-AXPVMS-DWMOTIF-V0102-6-1.PCSI$DESCRIPTION file 
[000000]DEC-AXPVMS-DWMOTIF-V0102-6-1.PCSI$TLB file 
[CDA$LIBRARY]                            directory 
[CDA$LIBRARY]CL_DAY.DOC_STYLE            file 
[CDA$LIBRARY]DEFSTYLE.DDIF               file 
[CDE$DEFAULTS]                           directory 
[CDE$DEFAULTS]                           directory 
[CDE$DEFAULTS.SYSTEM]                    directory 
[CDE$DEFAULTS.SYSTEM]                    directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS]       directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]     directory 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DT.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCALC.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTCREATE.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTFILE.DAT file 
[CDE$DEFAULTS.SYSTEM.APP-DEFAULTS.C]DTHELLO.DAT file 
. 
. 
.

前へ 次へ 目次