![](http://welcome.hp-ww.com/img/s.gif) |
» Booting Operating System
» Booting Standalone Backup
» Forcing Crash Dumps
|------------------------------------------------------------------------------|
| |
| B O O T C H A R T V 3.3 |
| |
|------------------------------------------------------------------------------|
|------------------------------------------------------------------------------|
| |
| M i c r o V a x |
| |
| MicroVAX 2000 |
| MicroVAX 3100/VAXstation 3100 |
| VAXstation II/GPX |
| MicroVAX 3500/3600 |
| VAXstation 3200/3500 |
| MicroVAX 3300/3400 |
| MicroVAX 3800/3900 |
| VAXstation 3100 |
| VAXstation 3520/3540 |
| VAX 4000 |
| VAXft 3000-310 |
|------------------------------------------------------------------------------|
MicroVAX
|--------|--------------------|-------------------|---------------------------|--------------------|-----------|-----------------|
| | Boot System | Boot File Being | Conversational Boot | Switch Console/VMS | CPU Modes | VMB.EXE Loaded |
| | | Used | | | | From: |
---------------------------------------------------------------------------------------------------------------------------------|
| UVAX-II| >>>B (Note CC)| | >>>B/nxxxxxx1 | | Console | |
| | | | | >>>CONT | | |
| | | | | | OR | PROM |
| | | | | | | |
| | >>> B device | | | | VMS | |
| | | | | | | |
|--------|--------------------|-------------------|---------------------------|--------------------|-----------|-----------------|
| 2000 | >>>B (Note Q) | | >>>B/R5:nxxxxxx1 | | Console | |
| | >>>B device | | | >>>CONT | | PROM |
| |--------------------| | | | OR | |
| | >>>TEST 51 | | | | | |
| | (Note P) | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3200/ | >>>B (Note J) | | >>>B/nxxxxxx1 | | Console | |
| 3500/ | >>>B device | | | >>>CONT | | PROM |
| 3600 |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | (Note J) | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3100 | >>>B (Note R) | | >>>B/R5:nxxxxxx1 | >>>CONT | Console | PROM |
| (PVAX) | >>>B device | | | | | |
| |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | (Note R) | | | | VMS | |
| | | | | | | |
|--------|-----------------------------------------------------------------------------------------------------------------------|
| 3300/ | >>>B (Note S) | | >>>B/R5:nxxxxxx1 | >>>CONT | Console | PROM |
| 3400 | >>>B device | | | | | |
| |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | (Note S) | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3520/ | CPUxx>>>B (Note U)| | CPUxx>>>B/R5:nxxxxxx1 | CPUxx>>>CONT | Console | PROM |
| 3540 | CPUxx>>>B device[:]| | | | | |
| |--------------------| | | | OR | |
| |CPUxx>>>SET BOOT dev| | | | | |
| | (Note V) | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3800 | >>>B (Note W) | | >>>B/R5:nxxxxxx1 | >>>CONT | Console | PROM |
| | >>>B device | | | | | |
| |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3900 | >>>B (Note X) | | >>>B/R5:nxxxxxx1 | >>>CONT | Console | PROM |
| | >>>B device | | | | | |
| |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 4000 | >>>B (Note Y) | | >>>B/R5:nxxxxxx1 | >>>CONT | Console | PROM |
| | >>>B device | | | | | |
| |--------------------| | | | OR | |
| | >>>SET BOOT dev | | | | | |
| | | | | | VMS | |
| | | | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3000- | >>>B (Note AA) | >>>B/R5:nxxxxxx1 | >>>PIO | Console | PROM |
| 310 | >>>B 'name' | |--------------------| | |
| (VAXft)| >>>B ddcn, ddcn, ddcn, ddcn | | >>>SET T P | AND |It is a special |
| | dd - Device type, MI, DI, EP | | | |VMB not found in |
| | c - Ctrl letter: A, B, F or G | | | VMS |VMS sources. |
| | n - Unit number | | | | |
---------------------------------------------------------------------------------------------------------------------------------|
MicroVAX BOOT S/A BACKUP
---------------------------------------------------------------------------------------------------------------------------------
| | DISK | CONSOLE |
---------------------------------------------------------------------------------------------------------------------------------
|UVAX-II | >>>B/E0000000 (Note CC)| >>>B/20000 MUA0 (TK50) |
| |------------------------|----------------------------------------------------------------------------------------------|
| | >>>B device | >>>B MUA0 (starting V4.5) (Note B) |
| | |----------------------------------------------------------------------------------------------|
| | | >>>B DUA1 (floppy) |
| | | |
|--------|------------------------|----------------------------------------------------------------------------------------------|
|2000 | >>>B/R5:E0000000 | >>>B MUA0 |
| | |----------------------------------------------------------------------------------------------|
| |------------------------| >>>B DUA2 (floppy) |
| | >>>B device | |
| | (Note Q) | |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
|3200/ | >>>B/E0000000 | >>>B MUA0 |
|3500/ |------------------------| |
|3600 | >>>B device | |
| | | |
| | | |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3100 | >>>B device | >>>B MKA500 |
| (PVAX) |------------------------| |
| | >>>B/R5:E0000000 [dev] | |
| | | |
|--------|------------------------|----------------------------------------------------------------------------------------------|
| 3300/ | >>>B device | >>>B MUA0 |
| 3400 |------------------------| |
| |>>>B/[R5:]E0000000 [dev]| |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3520/ | CPUxx>>>B device[:] | CPUxx>>>B MUA0[:] |
| 3540 |------------------------| |
| | CPUxx>>>B/R5:E0000000 | |
| | [dev] | |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3800 | >>>B device | >>>B MUA0 |
| |------------------------| |
| |>>>B/[R5:]E0000000 [dev]| |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3900 | >>>B device | >>>B MUA0 |
| |------------------------| |
| |>>>B/[R5:]E0000000 [dev]| |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 4000 | >>>B device | >>>B MUA0 |
| |------------------------| |
| | >>>B/R5:E0000000 [dev] | |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3000- | >>>B device (Note AA)| >>>B MIcn |
| 310 |------------------------| c - A, B, F or G |
| (VAXft)| >>>B/R5:E0000000 [dev] | n - Usually 5 or 7 |
| | | |
---------------------------------------------------------------------------------------------------------------------------------|
MicroVAX
----------------------------------------------------------------------------------------------------------------------------------
| | | | Second | | Second | | Second | | Second | |
| | | Massbus | Massbus | RL01/2 | RL01/2 | RL06/7 | RK06/7 | RA* | RA* | CI |
|--------------------------------------------------------------------------------------------------------------------------------|
| No console media or register settings for these processors. |
| Any default settings to boot the CPU can be done at the console level. On each processor there are comments on how to |
| set these defaults. |
|--------------------------------------------------------------------------------------------------------------------------------|
MicroVAX
|--------------------------------------------------------------------------------------------------------------------------------|
| | COMMENTS |
---------------------------------------------------------------------------------------------------------------------------------|
|UVAX-II | Note B: |
| | According to Release Notes V4.5, SYSBOOT has changed, and it is no longer necessary to boot from TK50 with |
| | >>>B/20000. |
| | Note CC: |
| | By default the cpu will do a 'sniffer' boot, i.e. it will try to boot from any bootable device in the following |
| | order: DUA0,..., DUB0,...(removable then fixed diskS), MUA0 (TK50), MRV11 (special PROM board), XQA0 (DEQNA) |
|--------|-----------------------------------------------------------------------------------------------------------------------|
| 2000 | Note P: |
| | We can force the 2000 to boot by default from any device using the >>>TEST 51 option at the console prompt. This |
| | device will be used ONLY at power-up. With the >>>BOOT command it will do a 'sniffer' boot. |
| | Note Q: |
| | Names of 'device' are: DUA2,DUA0,DUA1,MUA0,ESA0. This is also the order the 'sniffer' boot will look for a boot device|
| | >>>TEST 52 will allow to set/change new default values for R5. |
---------------------------------------------------------------------------------------------------------------------------------|
| 3200/ | Note J: |
| 3500/ | By defualt the cpu will do a 'sniffer' boot, i.e. it will try to boot from any bootable device, for bootable disk |
| 3600 | numbers they have to be in the range 0 - 15. |
| | We can force the cpu to boot directly from a device by typing >>>SET BOOT dev. 'dev' will be used ONLY at power-up, |
| | >>>BOOT will still do a sniffer boot. This is the behavior of VMB code used in V1.2 roms on the KA650 cpu module. |
| | >>>SET BFLG hex# will define the default value for R5. |
---------------------------------------------------------------------------------------------------------------------------------|
| 3100 | Note R: |
| (PVAX) | The default factory boot device is ESA0. SET BOOT command will define another boot device. The 3100 doesn't use a |
| | a 'sniffer' boot but uses the device defined with SET BOOT or the default; valid devices: DKAn00,DKBn00,ESA0,MKAn00, |
| | MKBn00. |
| | >>>SET BFLG hex#, will define the default value for R5. |
| | |
|--------|-----------------------------------------------------------------------------------------------------------------------|
| 3300/ | Note S: |
| 3400 | The 3300/3400 will boot off: ESA0, Default Boot device defined by SET BOOT ,or Device specified on the BOOT command. |
| | It doesn't use a 'sniffer' boot. >>>SET BFLAG hex# will define the default value for R5. |
| | Valid devices: [node$]DIAn,DUcn,DLcn,[node$]MIAn,MUcn,ESA0,XQcn,PRA0 |
| | Change nodename & alloclass: >>>SET HOST/DUP/DSSI n PARAMS, PARAMS>SET NODE name, PARAMS>SET ALLCLASS #, PARAMS>Write|
| | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3520/ | Note U: |
| 3540 | Valid device names are: DKA000, DKA100 - 700, ESA0, MUA0. Colon is optional. |
| | Note V: |
| | If no boot device is seleced, either as a parameter to the BOOT command, or with SET BOOT, the boot will fail. |
| | Use >>>SET BFLG hex# to change the default value for R5. |
| | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3800 | Note W: |
| | In its basic configuration, the 3800 has KFQSA, which is an interface between QBUS and DSSI, using RF type disks. |
| | Valid device names are: DUmn, MUmn, PRAn, XQAn. If no boot device selected with SET BOOT or with the BOOT |
| | command, it will display avaliable devices and wait for input. If no input within 30 second, it will try XQAn. |
| | Change node name & alloclass: >>>SET HOST/DUP/UQSSP/DISK n PARAMS, where 'n' is a disk # from >>>SHOW DEVICE. |
| | Use >>>SET BFLAG hex# to change the default value for R5. |
---------------------------------------------------------------------------------------------------------------------------------|
| 3900 | Note X: |
| | It its basic configuration, the 3900 has only QBUS, using RA type disks. |
| | Valid device names are: DJmn, DUmn, MUmn, PRAn, XQAn. If no boot device selected with SET BOOT or with the BOOT |
| | command, it will display avaliable devices and wait for input. If no input within 30 second, it will try XQAn. |
| | Use >>>SET BFLAG hex# to change the default value for R5. |
| | |
---------------------------------------------------------------------------------------------------------------------------------|
| 4000 | Note Y: |
| | Valid boot devices: [node$]DImn, DUcn, Mucn, PRAn, EZA0, XQan. RA disks on KDA50 and RF disks on KFQSA need to be |
| | addressed as DUcn. If no boot device selected with SET BOOT or with the BOOT command, it will display avaliable |
| | devices and wait for input. If no input within 30 second, it will try EZA0. >>>SET BFLAG hex#, wil define the |
| | default value for R5. Do: >>>SET HOST/DUP/DSSI/BUS:n node# PARAMS Where bus# and node# are determined from |
| | >>>SHOW DSSI & PARAMS>SET ALLOCLASS n & PARAMS>SET NODE name, to change alloclass & node name on dssi devices |
---------------------------------------------------------------------------------------------------------------------------------|
| 3000- | Note AA: |
| 310 | The VAXft can have up to four (4) boot path defined to increase the likehood of successful boot despite hardware |
| (VAXft)| faults. The controller letter is defined base on the zone & slot # in backplane, e.g. i/o module in slot 2 in zone-A|
| | will have a controller letter of A, in zone-B it is F, See Owner's Manual. To create a 'name' to boot using >>>B |
| | use: >>>SET[/P] BOOT DEFAULT/... SET[/P] BOOT command can be used to define other 'names' for different boots e.g. |
| | conversational boot, 'name' is up to 4 char, DEFAULT is a special case. |
---------------------------------------------------------------------------------------------------------------------------------|
MicroVAX
|--------------------------------------------------------------------------------------------------------------------------------|
| | Forcing CRASH |
---------------------------------------------------------------------------------------------------------------------------------|
|UVAX-II | With HALT switch in ENABLE postion, press HALT button twice or press the BREAK key. |
| | >>>E PSL | >>>E + | |
| | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
|--------|-----------------------------------------------------------------------------------------------------------------------|
| 2000 | Press the HALT button located in the back on the cpu unit. |
| | >>>E/G/N:F 0 | | |
| | >>>D PC FFFFFFFF | | Note: Before actually crashing the hang system collect a few |
| | >>>D PSL 041F0000 | | PC samples. |
| | >>>C | | |
| | | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3200/ | With HALT switch in ENABLE postion, press HALT button twice or press the BREAK key. |
| 3500/ | >>>E PSL | >>>E + | |
| 3600 | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3100 | Press the HALT button in the back of the system | |
| (PVAX) | >>>E PSL | | |
| | >>>E/I/N:4 0 | | Note: Before actually crashing the hang system collect a few |
| | >>>D PC FFFFFFFF | | PC samples. |
| | >>>D PSL 041F0000 | | |
| | >>>C | | |
|--------|-----------------------------------------------------------------------------------------------------------------------|
| 3300/ | With HALT switch in ENABLE postion, press HALT button twice or press the BREAK key. |
| 3400 | >>>E PSL | >>>E + | |
| | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3520/ | Press the HALT button. | |
| 3540 | >>>E PSL | | |
| | >>>E/I/N:4 0 | | Note: Before actually crashing the hang system collect a few |
| | >>>D PC FFFFFFFF | | PC samples. |
| | >>>D PSL 41F0000 | | |
| | >>>C | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3800 |With HALT switch in ENABLE postion, press HALT button twice or press the BREAK key. |
| | >>>E PSL | >>>E + | |
| | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3900 | With HALT switch in ENABLE postion, press HALT button twice or press the BREAK key. |
| | >>>E PSL | >>>E + | |
| | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 4000 | Press BREAK key or ^P (if >>>SET CONTROLP 1). | |
| | >>>E PSL | >>>E + | |
| | >>>E/I 0 | >>>D PC FFFFFFFF | Note: Before actually crashing the hang system collect a few |
| | >>>E + | >>>D PSL 1F0000 | PC samples. |
| | >>>E + | >>>C | |
| | >>>E + ----> | | |
---------------------------------------------------------------------------------------------------------------------------------|
| 3000- | Press the BREAK key. | | |
| 310 | >>>E PSL | | |
| (VAXft)| >>>E/I/N:4 0 | | Note: Before actually crashing the hang system collect a few |
| | >>>D PC FFFFFFFF | | PC samples. |
| | >>>D PSL 41F0000 | | |
| | >>>C | | |
---------------------------------------------------------------------------------------------------------------------------------|
|