I am sorry for repost this mail, but I forgot to attach the log.
Hi, all
First thanks to Darlington, Tom and Alan.
Yesterday I wrote this:
> Yesterday my one SEAGATE ST19101N disk suddenly give out strange
noise,
> so I had to powerd it off. Then I checked /var/adm/binary.errlog with dia
> and found some error log entries related with this disk. I hope these logs
> can help me find the reason of the noise. But I know little about the
> meaning of these entries. Can someone provide me any explantion on
these
> logs, or the steps to check the disk?
>
> BTW, are there anywhere can find the documents which provide the
> illustration of the output of /var/adm/binary.errlog?
Now things became more bad, :-<
Today while I was backing up data on the above mentioned disk, I got the
"write I/O error" and the backup was aborted. Luckily the backup
successed at the third time. Then I check /var/adm/binary.errlog and
have the attached error logs. Today's logs involved all my disks and
tape. Can you provide any analysis on the log. Additionally the entry
5,6,7 and 13 show the error is related with the device whose "target = 7
, Lun = 7" and the class is disk. But the command "scu show edt" doesn't
list this device. what's the problem?
Thans for your time!
--
**************************************
*** mailto:caixj_at_hptc1.ihep.ac.cn *
*** http://alpha01.ihep.ac.cn/~caixj *
**************************************
DECevent V2.7
******************************** ENTRY 1 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 14.
Timestamp of occurrence 15-OCT-1998 16:14:13
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x0088 Target = 1.
LUN = 0.
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 10.
------ Packet Type ------ 258. Module Name String
Routine Name cdisk_rec_status
------ Packet Type ------ 256. Generic String
Recovery progress event, this is NOT an
error
------ Packet Type ------ 262. Info Error String
Error Type Information Message Detected (recovered)
------ Packet Type ------ 257. Device Name String
Device Name DEC RZ1BB-BS (C) DECRZ1BB-BS (
------ Packet Type ------ 256. Generic String
Active CCB at time of error
------ Packet Type ------ 256. Generic String
CCB request completed with an error
------ Packet Type ------ 1. SCSI I/O Request CCB(CCB_SCSIIO)
Packet Revision 76.
CCB Address xFFFFFC00054ABE80
CCB Length x00C0
XPT Function Code x01 Execute requested SCSI I/O
CAM Status xC4 CCB Request Completed WITH Error
SIM Queue Frozen with this Error
Autosense Data Valid for Target
Path ID 2.
Target ID 1.
Target LUN 0.
CAM Flags x000058C0 Data Direction (11: no data)
Return the SIM Queue to Frozen State
Place CCB at head of SIM Queue
Attempt Sync Data Xfer - SDTR
*pdrv_ptr xFFFFFC00054ABB28
*next_ccb x0000000000000000
*req_map x0000000000000000
void (*cam_cbfcnp)() xFFFFFC0000553000
*data_ptr x0000000000000000
Data Transfer Length 0.
*sense_ptr xFFFFFC00054ABB50
Auotsense Byte Length 64.
CDB Length 6.
Scatter/Gather Entry Cnt 0.
SCSI Status x02 Check Condition
Autosense Residue Length x2E
Transfer Residue Length x00000000
(CDB) Command & Data Buf
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 * ............*
Timeout Value x00000014
*msg_ptr x0000000000000000
Message Length 0.
Vendor Unique Flags x0000
Tag Queue Actions x00
------ Packet Type ------ 256. Generic String
Error, exception, or abnormal condition
------ Packet Type ------ 256. Generic String
UNIT ATTENTION - Medium changed or target
reset
------ Packet Type ------ 768. SCSI Sense Data
Packet Revision 0.
--- Sense Data For Device RZ1BB-BS, 2GB 68 PIN Wide - Fast 10 & Fast
20 - 7200RPM
Error Code x70 Current Error
Segment # x00
Information Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
Sense Key x06 UNIT ATTENTION
Additional Sense Length x0A
CMD Specific Info Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
ASC & ASCQ x2902 ASC/ASCQ not available from Seagate.
FRU Code x02
Sense Key Specific Byte 0 x00
Byte 1 x00
Byte 2 x00
******************************** ENTRY 2 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 13.
Timestamp of occurrence 15-OCT-1998 16:14:13
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A0 Target = 4.
LUN = 0.
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 10.
------ Packet Type ------ 258. Module Name String
Routine Name cdisk_rec_status
------ Packet Type ------ 256. Generic String
Recovery progress event, this is NOT an
error
------ Packet Type ------ 262. Info Error String
Error Type Information Message Detected (recovered)
------ Packet Type ------ 257. Device Name String
Device Name SEAGATE ST34555N ST34555N
------ Packet Type ------ 256. Generic String
Active CCB at time of error
------ Packet Type ------ 256. Generic String
CCB request completed with an error
------ Packet Type ------ 1. SCSI I/O Request CCB(CCB_SCSIIO)
Packet Revision 76.
CCB Address xFFFFFC00079B5A00
CCB Length x00C0
XPT Function Code x01 Execute requested SCSI I/O
CAM Status xC4 CCB Request Completed WITH Error
SIM Queue Frozen with this Error
Autosense Data Valid for Target
Path ID 2.
Target ID 4.
Target LUN 0.
CAM Flags x000058C0 Data Direction (11: no data)
Return the SIM Queue to Frozen State
Place CCB at head of SIM Queue
Attempt Sync Data Xfer - SDTR
*pdrv_ptr xFFFFFC00079B56A8
*next_ccb x0000000000000000
*req_map x0000000000000000
void (*cam_cbfcnp)() xFFFFFC0000553000
*data_ptr x0000000000000000
Data Transfer Length 0.
*sense_ptr xFFFFFC00079B56D0
Auotsense Byte Length 64.
CDB Length 6.
Scatter/Gather Entry Cnt 0.
SCSI Status x02 Check Condition
Autosense Residue Length x2E
Transfer Residue Length x00000000
(CDB) Command & Data Buf
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 * ............*
Timeout Value x00000014
*msg_ptr x0000000000000000
Message Length 0.
Vendor Unique Flags x0000
Tag Queue Actions x00
------ Packet Type ------ 256. Generic String
Error, exception, or abnormal condition
------ Packet Type ------ 256. Generic String
UNIT ATTENTION - Medium changed or target
reset
------ Packet Type ------ 768. SCSI Sense Data
Packet Revision 0.
Error Code x70 Current Error
Segment # x00
Information Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
Sense Key x06 Unit Attention
Additional Sense Length x0A
CMD Specific Info Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
ASC & ASCQ x2902 ASC = x0029
ASCQ = x0002
SCSI Bus Reset occurred
FRU Code x02
Sense Key Specific Byte 0 x00 Sense Key Data NOT Valid
Byte 1 x00
Byte 2 x00
Addition Sense Data Size Allocated by Driver
Count of valid bytes: 46.
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
0020: 00000000 00000000 00000000 00000000 *................*
******************************** ENTRY 3 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 12.
Timestamp of occurrence 15-OCT-1998 16:14:13
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A8 Target = 5.
LUN = 0.
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 10.
------ Packet Type ------ 258. Module Name String
Routine Name cdisk_rec_status
------ Packet Type ------ 256. Generic String
Recovery progress event, this is NOT an
error
------ Packet Type ------ 262. Info Error String
Error Type Information Message Detected (recovered)
------ Packet Type ------ 257. Device Name String
Device Name SEAGATE ST19101N ST19101N
------ Packet Type ------ 256. Generic String
Active CCB at time of error
------ Packet Type ------ 256. Generic String
CCB request completed with an error
------ Packet Type ------ 1. SCSI I/O Request CCB(CCB_SCSIIO)
Packet Revision 76.
CCB Address xFFFFFC0007ECA800
CCB Length x00C0
XPT Function Code x01 Execute requested SCSI I/O
CAM Status xC4 CCB Request Completed WITH Error
SIM Queue Frozen with this Error
Autosense Data Valid for Target
Path ID 2.
Target ID 5.
Target LUN 0.
CAM Flags x000058C0 Data Direction (11: no data)
Return the SIM Queue to Frozen State
Place CCB at head of SIM Queue
Attempt Sync Data Xfer - SDTR
*pdrv_ptr xFFFFFC0007ECA4A8
*next_ccb x0000000000000000
*req_map x0000000000000000
void (*cam_cbfcnp)() xFFFFFC0000553000
*data_ptr x0000000000000000
Data Transfer Length 0.
*sense_ptr xFFFFFC0007ECA4D0
Auotsense Byte Length 64.
CDB Length 6.
Scatter/Gather Entry Cnt 0.
SCSI Status x02 Check Condition
Autosense Residue Length x2E
Transfer Residue Length x00000000
(CDB) Command & Data Buf
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 * ............*
Timeout Value x00000014
*msg_ptr x0000000000000000
Message Length 0.
Vendor Unique Flags x0000
Tag Queue Actions x00
------ Packet Type ------ 256. Generic String
Error, exception, or abnormal condition
------ Packet Type ------ 256. Generic String
UNIT ATTENTION - Medium changed or target
reset
------ Packet Type ------ 768. SCSI Sense Data
Packet Revision 0.
Error Code x70 Current Error
Segment # x00
Information Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
Sense Key x06 Unit Attention
Additional Sense Length x0A
CMD Specific Info Byte 3 x00
Byte 2 x00
Byte 1 x00
Byte 0 x00
ASC & ASCQ x2900 ASC = x0029
ASCQ = x0000
Power On, Reset, or Bus Device Reset
Occurred
FRU Code x02
Sense Key Specific Byte 0 x00 Sense Key Data NOT Valid
Byte 1 x00
Byte 2 x00
Addition Sense Data Size Allocated by Driver
Count of valid bytes: 46.
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
0020: 00000000 00000000 00000000 00000000 *................*
******************************** ENTRY 4 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 11.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 3. High Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x0090 Target = 2.
LUN = 0.
------- CAM Data -------
Class x01 Tape
Subsystem x01 Tape
Number of Packets 4.
------ Packet Type ------ 258. Module Name String
Routine Name ctape_async
------ Packet Type ------ 256. Generic String
Bus reset notification
------ Packet Type ------ 260. Hardware Error String
Error Type Hard Error Detected
------ Packet Type ------ 257. Device Name String
Device Name ARCHIVE Python 02779-XXXPython 027
******************************** ENTRY 5 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 10.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 3. High Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number xFFFF Target = 7.
LUN = 7.
Not Defined
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name isp_cam_bus_reset_tmo
------ Packet Type ------ 256. Generic String
SCSI Bus Reset performed
******************************** ENTRY 6 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 9.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number xFFFF Target = 7.
LUN = 7.
Not Defined
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name isp_init
------ Packet Type ------ 256. Generic String
StorageWorks signal reporting not enabled
******************************** ENTRY 7 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 8.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number xFFFF Target = 7.
LUN = 7.
Not Defined
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name isp_reinit
------ Packet Type ------ 256. Generic String
Beginning Adapter/Chip reinitialization
******************************** ENTRY 8 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 7.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A0 Target = 4.
LUN = 0.
------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 3.
------ Packet Type ------ 258. Module Name String
Routine Name ss_perform_timeout
------ Packet Type ------ 256. Generic String
timeout on disconnected request
------ Packet Type ------ 1038. SIM Working Set(SIM_WS)
Packet Revision 2.
*flink xFFFFFC0001FBA5D8
*blink xFFFFFC0007EDF358
Controller # for HBA 2.
Target ID 4.
LUN 0.
CAM Status x00000000 CCB Request In Progress
TAG x0000005F
Sequence Number x00008765
Time Stamp x00000000
*nexus xFFFFFC0007EA1D80
*it_nexus xFFFFFC0007E99340
*sim_sc xFFFFFC0007CBA000
*ccb xFFFFFC0001FB8C80
Phase Bits x00000000
Misc Flags x00080040 This Request is Tagged
Timeout
CAM Flags x00000482 SIM Queue Actions are Enabled
Data Direction (10: DATA OUT)
Disable the SIM Queue Frozen State
Error Recovery x00000080 SIM_WS in process of being timed out
Recovery Status x00000000
(*as_callback)() x0000000000000000
*as_ccb x0000000000000000
(*tmo_fn)() xFFFFFC0000587BC0
*tmo_arg xFFFFFC0001FB8A58
Target WS Flags x00000000
Initiator Bit Code x00
Disconnects Enabled if 1 x00000000
Command from Initiator
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Size of Cmd Desc BLK CDB x00
*link_com x0000000000000000
SIM Timer x00000000
Circular Que Msg Out
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00030000 0000001A * ............*
Circular Que Msg In
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000010 * ............*
Circular Que Phases
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000020 * ...........*
Message Out Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 005F20C0 *. _.............*
0010: 00000000 00000000 00000000 * ...........t*
Message In Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Phase Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
# Msg bytes Sent x00
SCSI Status x00 Good Condition
Repeating Error x00
hba_data1 x0000000000000000
hba_data2 x0000000000000000
hba_data3 x0000000000000000
hba_data4 x0000000000000000
I/O Abort Attempts x00000001
Lost Arbitrations x00000000
*dme_in_ws x0000000000000000
DME In Flags x00000000
DME In Data Count x00000000
DME In Xfer Count x00000000
*dme_in_data x0000000000000000
*dme_in_seg x0000000000000000
*dme_out_ws x0000000000000000
DME Out Flags x00000000
DME Out Data Count x00000000
DME Out Xfer Count x00000000
*dme_out_data x0000000000000000
*dme_out_seg x0000000000000000
*dme_cmd_ws x0000000000000000
DME Cmd Flags x00000000
DME Cmd Data Count x00000000
DME Cmd Xfer Count x00000000
*dme_cmd_data x0000000000000000
*dme_cmd_seg x0000000000000000
*dme_dat_ws x0000000000000000
DME Data Flags x00000000
DME Data Count x00000000
DME Data Xfer Count x00000000
*dme_dat_data x0000000000000000
*dme_dat_seg x0000000000000000
*dme_sts_ws x0000000000000000
DME Sts Flags x00000000
DME Sts Count x00000000
DME Sts Xfer Count x00000000
*dme_sts_data x0000000000000000
*dme_sts_seg x0000000000000000
CAM Sort x00000000
WS Priority x00000000
******************************** ENTRY 9 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 6.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A0 Target = 4.
LUN = 0.
------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 3.
------ Packet Type ------ 258. Module Name String
Routine Name ss_perform_timeout
------ Packet Type ------ 256. Generic String
timeout on disconnected request
------ Packet Type ------ 1038. SIM Working Set(SIM_WS)
Packet Revision 2.
*flink xFFFFFC0001FB8A58
*blink xFFFFFC0007EB9358
Controller # for HBA 2.
Target ID 4.
LUN 0.
CAM Status x00000000 CCB Request In Progress
TAG x0000002D
Sequence Number x00008764
Time Stamp x00000000
*nexus xFFFFFC0007EA1D80
*it_nexus xFFFFFC0007E99340
*sim_sc xFFFFFC0007CBA000
*ccb xFFFFFC0007EDF580
Phase Bits x00000000
Misc Flags x00080040 This Request is Tagged
Timeout
CAM Flags x00000482 SIM Queue Actions are Enabled
Data Direction (10: DATA OUT)
Disable the SIM Queue Frozen State
Error Recovery x00000080 SIM_WS in process of being timed out
Recovery Status x00000000
(*as_callback)() x0000000000000000
*as_ccb x0000000000000000
(*tmo_fn)() xFFFFFC0000587BC0
*tmo_arg xFFFFFC0007EDF358
Target WS Flags x00000000
Initiator Bit Code x00
Disconnects Enabled if 1 x00000000
Command from Initiator
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Size of Cmd Desc BLK CDB x00
*link_com x0000000000000000
SIM Timer x00000000
Circular Que Msg Out
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00030000 0000001A * ............*
Circular Que Msg In
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000010 * ............*
Circular Que Phases
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000020 * ...........*
Message Out Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 002D20C0 *. -.............*
0010: 00000000 00000000 00000000 * ...........t*
Message In Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Phase Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
# Msg bytes Sent x00
SCSI Status x00 Good Condition
Repeating Error x00
hba_data1 x0000000000000000
hba_data2 x0000000000000000
hba_data3 x0000000000000000
hba_data4 x0000000000000000
I/O Abort Attempts x00000001
Lost Arbitrations x00000000
*dme_in_ws x0000000000000000
DME In Flags x00000000
DME In Data Count x00000000
DME In Xfer Count x00000000
*dme_in_data x0000000000000000
*dme_in_seg x0000000000000000
*dme_out_ws x0000000000000000
DME Out Flags x00000000
DME Out Data Count x00000000
DME Out Xfer Count x00000000
*dme_out_data x0000000000000000
*dme_out_seg x0000000000000000
*dme_cmd_ws x0000000000000000
DME Cmd Flags x00000000
DME Cmd Data Count x00000000
DME Cmd Xfer Count x00000000
*dme_cmd_data x0000000000000000
*dme_cmd_seg x0000000000000000
*dme_dat_ws x0000000000000000
DME Data Flags x00000000
DME Data Count x00000000
DME Data Xfer Count x00000000
*dme_dat_data x0000000000000000
*dme_dat_seg x0000000000000000
*dme_sts_ws x0000000000000000
DME Sts Flags x00000000
DME Sts Count x00000000
DME Sts Xfer Count x00000000
*dme_sts_data x0000000000000000
*dme_sts_seg x0000000000000000
CAM Sort x00000000
WS Priority x00000000
******************************** ENTRY 10 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 5.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A0 Target = 4.
LUN = 0.
------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 3.
------ Packet Type ------ 258. Module Name String
Routine Name ss_perform_timeout
------ Packet Type ------ 256. Generic String
timeout on disconnected request
------ Packet Type ------ 1038. SIM Working Set(SIM_WS)
Packet Revision 2.
*flink xFFFFFC0007EDF358
*blink xFFFFFC0007ECA158
Controller # for HBA 2.
Target ID 4.
LUN 0.
CAM Status x00000000 CCB Request In Progress
TAG x0000006F
Sequence Number x00008763
Time Stamp x00000000
*nexus xFFFFFC0007EA1D80
*it_nexus xFFFFFC0007E99340
*sim_sc xFFFFFC0007CBA000
*ccb xFFFFFC0007EB9580
Phase Bits x00000000
Misc Flags x00080040 This Request is Tagged
Timeout
CAM Flags x00000482 SIM Queue Actions are Enabled
Data Direction (10: DATA OUT)
Disable the SIM Queue Frozen State
Error Recovery x00000080 SIM_WS in process of being timed out
Recovery Status x00000000
(*as_callback)() x0000000000000000
*as_ccb x0000000000000000
(*tmo_fn)() xFFFFFC0000587BC0
*tmo_arg xFFFFFC0007EB9358
Target WS Flags x00000000
Initiator Bit Code x00
Disconnects Enabled if 1 x00000000
Command from Initiator
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Size of Cmd Desc BLK CDB x00
*link_com x0000000000000000
SIM Timer x00000000
Circular Que Msg Out
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00030000 0000001A * ............*
Circular Que Msg In
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000010 * ............*
Circular Que Phases
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000020 * ...........*
Message Out Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 006F20C0 *. o.............*
0010: 00000000 00000000 00000000 * ...........t*
Message In Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Phase Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
# Msg bytes Sent x00
SCSI Status x00 Good Condition
Repeating Error x00
hba_data1 x0000000000000000
hba_data2 x0000000000000000
hba_data3 x0000000000000000
hba_data4 x0000000000000000
I/O Abort Attempts x00000001
Lost Arbitrations x00000000
*dme_in_ws x0000000000000000
DME In Flags x00000000
DME In Data Count x00000000
DME In Xfer Count x00000000
*dme_in_data x0000000000000000
*dme_in_seg x0000000000000000
*dme_out_ws x0000000000000000
DME Out Flags x00000000
DME Out Data Count x00000000
DME Out Xfer Count x00000000
*dme_out_data x0000000000000000
*dme_out_seg x0000000000000000
*dme_cmd_ws x0000000000000000
DME Cmd Flags x00000000
DME Cmd Data Count x00000000
DME Cmd Xfer Count x00000000
*dme_cmd_data x0000000000000000
*dme_cmd_seg x0000000000000000
*dme_dat_ws x0000000000000000
DME Data Flags x00000000
DME Data Count x00000000
DME Data Xfer Count x00000000
*dme_dat_data x0000000000000000
*dme_dat_seg x0000000000000000
*dme_sts_ws x0000000000000000
DME Sts Flags x00000000
DME Sts Count x00000000
DME Sts Xfer Count x00000000
*dme_sts_data x0000000000000000
*dme_sts_seg x0000000000000000
CAM Sort x00000000
WS Priority x00000000
******************************** ENTRY 11 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 4.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A0 Target = 4.
LUN = 0.
------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 3.
------ Packet Type ------ 258. Module Name String
Routine Name ss_perform_timeout
------ Packet Type ------ 256. Generic String
timeout on disconnected request
------ Packet Type ------ 1038. SIM Working Set(SIM_WS)
Packet Revision 2.
*flink xFFFFFC0007EB9358
*blink xFFFFFC0007EA1D80
Controller # for HBA 2.
Target ID 4.
LUN 0.
CAM Status x00000000 CCB Request In Progress
TAG x00000040
Sequence Number x00008762
Time Stamp x00000000
*nexus xFFFFFC0007EA1D80
*it_nexus xFFFFFC0007E99340
*sim_sc xFFFFFC0007CBA000
*ccb xFFFFFC0007ECA380
Phase Bits x00000000
Misc Flags x00080040 This Request is Tagged
Timeout
CAM Flags x00000482 SIM Queue Actions are Enabled
Data Direction (10: DATA OUT)
Disable the SIM Queue Frozen State
Error Recovery x00000080 SIM_WS in process of being timed out
Recovery Status x00000000
(*as_callback)() x0000000000000000
*as_ccb x0000000000000000
(*tmo_fn)() xFFFFFC0000587BC0
*tmo_arg xFFFFFC0007ECA158
Target WS Flags x00000000
Initiator Bit Code x00
Disconnects Enabled if 1 x00000000
Command from Initiator
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Size of Cmd Desc BLK CDB x00
*link_com x0000000000000000
SIM Timer x00000000
Circular Que Msg Out
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00030000 0000001A * ............*
Circular Que Msg In
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000010 * ............*
Circular Que Phases
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000020 * ...........*
Message Out Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 004020C0 *. _at_.............*
0010: 00000000 00000000 00000000 * ...........t*
Message In Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Phase Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
# Msg bytes Sent x00
SCSI Status x00 Good Condition
Repeating Error x00
hba_data1 x0000000000000000
hba_data2 x0000000000000000
hba_data3 x0000000000000000
hba_data4 x0000000000000000
I/O Abort Attempts x00000001
Lost Arbitrations x00000000
*dme_in_ws x0000000000000000
DME In Flags x00000000
DME In Data Count x00000000
DME In Xfer Count x00000000
*dme_in_data x0000000000000000
*dme_in_seg x0000000000000000
*dme_out_ws x0000000000000000
DME Out Flags x00000000
DME Out Data Count x00000000
DME Out Xfer Count x00000000
*dme_out_data x0000000000000000
*dme_out_seg x0000000000000000
*dme_cmd_ws x0000000000000000
DME Cmd Flags x00000000
DME Cmd Data Count x00000000
DME Cmd Xfer Count x00000000
*dme_cmd_data x0000000000000000
*dme_cmd_seg x0000000000000000
*dme_dat_ws x0000000000000000
DME Data Flags x00000000
DME Data Count x00000000
DME Data Xfer Count x00000000
*dme_dat_data x0000000000000000
*dme_dat_seg x0000000000000000
*dme_sts_ws x0000000000000000
DME Sts Flags x00000000
DME Sts Count x00000000
DME Sts Xfer Count x00000000
*dme_sts_data x0000000000000000
*dme_sts_seg x0000000000000000
CAM Sort x00000000
WS Priority x00000000
******************************** ENTRY 12 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 3.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 3. High Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number x00A8 Target = 5.
LUN = 0.
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 3.
------ Packet Type ------ 258. Module Name String
Routine Name isp_termio_abort_bdr
------ Packet Type ------ 256. Generic String
Failed to abort specified IO transaction -
retrying
------ Packet Type ------ 1038. SIM Working Set(SIM_WS)
Packet Revision 2.
*flink xFFFFFC0007ECD7D8
*blink xFFFFFC0007EA1E00
Controller # for HBA 2.
Target ID 5.
LUN 0.
CAM Status x00000000 CCB Request In Progress
TAG x00000056
Sequence Number x0000875F
Time Stamp x00000000
*nexus xFFFFFC0007EA1E00
*it_nexus xFFFFFC0007E99600
*sim_sc xFFFFFC0007CBA000
*ccb xFFFFFC0007EC8380
Phase Bits x00000000
Misc Flags x000E0040 This Request is Tagged
SIM expects Bus Free Phase
An Abort Tag Initiated on this Request
Timeout
CAM Flags x00000442 SIM Queue Actions are Enabled
Data Direction (01: DATA IN)
Disable the SIM Queue Frozen State
Error Recovery x00000080 SIM_WS in process of being timed out
Recovery Status x00000000
(*as_callback)() x0000000000000000
*as_ccb x0000000000000000
(*tmo_fn)() xFFFFFC0000587BC0
*tmo_arg xFFFFFC0007EC8158
Target WS Flags x00000000
Initiator Bit Code x00
Disconnects Enabled if 1 x00000000
Command from Initiator
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Size of Cmd Desc BLK CDB x00
*link_com x0000000000000000
SIM Timer x3625AEF1
Circular Que Msg Out
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00070000 0000001A * ............*
Circular Que Msg In
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000010 * ............*
Circular Que Phases
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000020 * ...........*
Message Out Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 000D5620 805620C0 *. V. V..........*
0010: 00000000 00000000 00000000 * ...........t*
Message In Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
Phase Que
15--<-12 11--<-08 07--<-04 03--<-00 :Byte Order
0000: 00000000 00000000 00000000 00000000 *................*
0010: 00000000 00000000 00000000 00000000 *................*
# Msg bytes Sent x00
SCSI Status x00 Good Condition
Repeating Error x04
hba_data1 x0000000000000000
hba_data2 x0000000000000000
hba_data3 x0000000000000000
hba_data4 x0000000000000000
I/O Abort Attempts x00000001
Lost Arbitrations x00000000
*dme_in_ws x0000000000000000
DME In Flags x00000000
DME In Data Count x00000000
DME In Xfer Count x00000000
*dme_in_data x0000000000000000
*dme_in_seg x0000000000000000
*dme_out_ws x0000000000000000
DME Out Flags x00000000
DME Out Data Count x00000000
DME Out Xfer Count x00000000
*dme_out_data x0000000000000000
*dme_out_seg x0000000000000000
*dme_cmd_ws x0000000000000000
DME Cmd Flags x00000000
DME Cmd Data Count x00000000
DME Cmd Xfer Count x00000000
*dme_cmd_data x0000000000000000
*dme_cmd_seg x0000000000000000
*dme_dat_ws x0000000000000000
DME Data Flags x00000000
DME Data Count x00000000
DME Data Xfer Count x00000000
*dme_dat_data x0000000000000000
*dme_dat_seg x0000000000000000
*dme_sts_ws x0000000000000000
DME Sts Flags x00000000
DME Sts Count x00000000
DME Sts Xfer Count x00000000
*dme_sts_data x0000000000000000
*dme_sts_seg x0000000000000000
CAM Sort x00000000
WS Priority x00000000
******************************** ENTRY 13 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 2.
Timestamp of occurrence 15-OCT-1998 16:14:12
Host name alpha01
System type register x0000001E Systype 30. (Miata)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 2.
Unit Number xFFFF Target = 7.
LUN = 7.
Not Defined
------- CAM Data -------
Class x00 Disk
Subsystem x00 Disk
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name isp_mailboxcomplete
------ Packet Type ------ 256. Generic String
Timeout on mailbox command completion -
scheduling chip reinit
Received on Thu Oct 15 1998 - 13:12:15 NZDT