I'm an end-user who also gets to serve as my own system administrator. I'm
attempting to add an external 23 GB SCSI hard drive (Seagate ST423451W). I saw
several question posts but no answers...
I have my drive physically hooked up to the wide SCSI bus on my AlphaStation 600
5/333. At the boot prompt if I do
>>> show device
I get
dkb800.8.0.1002.0 DKB800 SEAGATE ST423451W 0013
I followed the directions in the system admin doc section 6.3 Adding Disk and
Tape Drives. After rebuilding my kernel, I used (guessing 8 for the device
number)
./MAKEDEV rz8
Now, when I try to
#disklabel -r rz8
I get the error message
disklabel: /dev/rrz8a: No such device or address
What did I do wrong?
thanks for your help,
-Darrell Winner
darrell_winner_at_ccmail.aleq.tyndall.af.mil
Received on Wed Feb 18 1998 - 23:41:31 NZDT