System: 2100, 8400 DU4.0A, DU4.0B\
Need to configure a modem on 2100 and 8400. Looked at doc and have
questions.
How does one identify the serial device on the 2100 and 8400? There
is no ttax device in uerf or no serial device shown with scu> show edt
command. There is physically a serial port with a printer icon on it
next to two 15 pin connectors in the 2100. My guess is that I could
use this DB25 pin for modem communications. Now I need to identify
the device.
The doc explains to connect a PPP via modem do the following:
1) copy entry for modem into /etc/acucap {Is there a location where I
can find examples on this config per modem type ?}
2) create entry in /etc/remote for the calling system.
3) edit inittab file add following -
modem:23:off:/usr/sbin/getty /dev/tty00 m38400 vt100 { for a 38400
baud modem. How does one map the tty00 device to the serial port? If
I had LAT setup I would use something like latcp -A -p ttyXX -H
servername -R PORT_1 but I'm not using LAT. Is there a similar
command to use?}
4) Use tip to communicate with modem.
Helpful suggestions would be appreciated.
Thanks,
Received on Mon Feb 23 1998 - 23:09:48 NZDT