Dear Managers,
I'm trying to boot a new xp1000 machine as a diskless client. On the
server there is Tru64 Unix V4.0E installed. The machine crashes (see
the boot mesage at the end of this mail). I tried different kernels:
the original created by the dmu utility, one created on an xp1000 with
TU 4.0E, another one created on an xp1000 with TU 4.0F: result remains
the same.
I can boot from this installation an AlphaStation 255 and PWS 433 au.
What do I miss?
TIA
Gerhard
8< ---------------- cut here -------------------- >8
>>>b ewa0
(boot ewa0.0.0.3.1 -flags a)
Trying BOOTP boot.
Broadcasting BOOTP Request...
Received BOOTP Packet File Name is: /clients/msftemp/.vmunix
local inet address: XXX.XXX.XXX.XXX
remote inet address: XXX.XXX.XXX.XXX
TFTP Read File Name: /clients/msftemp/.vmunix
netmask = 255.255.0.0
Server is on same subnet as client.
................................................................
........................................................
bootstrap code read in
base = 19e000, image_start = 0, image_bytes = 77c2e0
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Secondary boot program - Fri Nov 13 14:05:06 EST 1998
Loading vmunix ...
Loading at 0xfffffc0000230000
Current PAL Revision <0x100150001013a>
Switching to OSF PALcode Succeeded
New PAL Revision <0x1001300020133>
Sizes:
text = 5958672
data = 1774288
bss = 4295104
Starting at 0xfffffc00004890d0
Broadcasting BOOTP Request
.....Alpha boot: available memory from 0xfa6000 to 0x7fee000
Digital UNIX V4.0E (Rev. 1091); Wed Mar 31 16:30:45 MET DST 1999
physical memory = 128.00 megabytes.
available memory = 113.04 megabytes.
using 485 buffers containing 3.78 megabytes of memory
emx: dynamic addressing enabled
Firmware revision: 5.5-5
PALcode: Digital UNIX version 1.51-19
COMPAQ Professional Workstation XP1000
pci1 at nexus
tu0: DECchip 21143: Revision: 4.1
tu0: auto negotiation capable device
tu0 at pci1 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-71-B8-F4
tu0: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex
isp0 at pci1 slot 6
isp0: QLOGIC ISP1040C
isp0: Firmware revision 5.57 (loaded by console)
scsi0 at isp0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0) (DEC RZ2CD-KS (C) DEC 0306) (Wide16)
pci2001 at pci1 slot 8
gpc0 at isa0
pci0 at nexus
isa0 at pci0
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
fd0 at fdi0 unit 0
ata0 at pci0 slot 107
ata0: Cypress 82C693
scsi1 at ata0 slot 0
rz8 at scsi1 target 0 lun 0 (LID=2) (COMPAQ CRD-8322B 1.07)
ata1 at pci0 slot 207
ata1: Cypress 82C693
scsi2 at ata1 slot 0
comet0 at pci0 slot 13
lvm0: configured.
lvm1: configured.
lvm2: configured.
kernel console: ace0
Booted from Network Interface (BOOTP 1 3 0 0 0 3 0 00-00-F8-71-B8-F4 1)
bootp: request failed, errno=60
netblk.cliipadr 0
whoami: no host name
panic (cpu 0): vfs_mountroot: cannot mount root
syncing disks... done
DUMP: No primary swap, no explicit dumpdev.
Nowhere to put header, giving up.
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc000048ac60
>>>
Received on Wed Jul 28 1999 - 10:27:45 NZST