Hello Managers,
I have setted up my first RIS-server and now I want to use
the installation cloning.
The machine with RIS services and the OS to be installed are both Tru64 4.0F.
I īve read the docs "Sharing software.." and Appendix C of "Installation Guide"
My RIS-Area contains on local disk an unpacked OS-CDROM,
I have made a profile set and registered the client for this profile.
Also there is in the profile set an install.cdf and a prepare script to setup
my own partition scheme. All files have modes 755 (like in the docs).
When I boot via ethernet, everytime the client crashes with messages:
Booted from Network Interface (BOOTP 0 13 0 0 0 3 0 08-00-2B-C4-14-2E 1)
bootp: request failed, errno=60
netblk.cliipadr 0
whoami: no host name
panic (cpu 0): vfs_mountroot: cannot mount root
syncing disks... done
Do I have missed some things ?
Any help appreciated, thanks
Uwe
================================================================================
>>>boot ewc0
(boot ewc0.0.0.13.0 -flags a)
Trying BOOTP boot.
Broadcasting BOOTP Request...
Received BOOTP Packet File Name is: /ris/r0k1
local inet address: xxx.xxx.xxx.xxx # The IP-Addresses are correct here
remote inet address: xxx.xxx.xxx.xxx
TFTP Read File Name: /ris/r0k1
netmask = 255.255.255.0
Server is on same subnet as client.
.....................................................................................................................
bootstrap code read in
--- snipp ---
jumping to bootstrap code
Secondary boot program - Mon Apr 12 13:25:54 EDT 1999
Loading vmunix ...
Loading at 0xffffffff00000000
Current PAL Revision <0x1000000010538>
Switching to OSF PALcode Succeeded
New PAL Revision <0x100000002012e>
Mapping Image Address Space
Mapping complete
Sizes:
text = 5711664
data = 1789744
bss = 3435216
Starting at 0xffffffff00212580
Broadcasting BOOTP Request
Retrying bootp; next attempt in 5 seconds.
.....Retrying bootp; next attempt in 7 seconds.
.......boot_devopen_bp: Unable to access network
boot_devopen: failure to open boot device
Alpha boot: available memory from 0xeb8000 to 0x7ffe000
Digital UNIX V4.0F (Rev. 1229); Mon Apr 12 13:33:38 EDT 1999
physical memory = 128.00 megabytes.
available memory = 113.97 megabytes.
using 161 buffers containing 1.25 megabytes of memory
emx: dynamic addressing enabled
DDR: WARNING: Unable to obtain Device Information Database
Unable to open file /etc/ddr.db
DDR: WARNING: Basic Defaults will be used.
AlphaStation 255/300 system
DECchip 21071
82378IB (SIO) PCI/ISA Bridge
Firmware revision: 7.0
PALcode: Digital UNIX version 1.46
PWRMGR - Power Manager failed to register CPU0 handler
pci0 at nexus
psiop0 at pci0 slot 6
Loading SIOP: script c0000f00, reg 82090000, data 4098cf00
scsi0 at psiop0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0) (DEC RZ29L-AA (C) DEC LYJ0)
rz1 at scsi0 target 1 lun 0 (LID=1) (DEC RZ28L-AS (C) DEC 0814)
rz4 at scsi0 target 4 lun 0 (LID=2) (DEC RRD46 (C) DEC 0557)
isa0 at pci0
gpc0 at isa0
ace0 at isa0
lp0 at isa0
fdi0 at isa0
fta0 DEC DEFPA FDDI Module, Hardware Revision 1
fta0 at pci0 slot 11
fta0: DEC DEFPA (PDQ) FDDI Interface, Hardware address: 00-00-F8-60-10-87
fta0: Firmware rev: 3.10
tu0: DECchip 21140: Revision: 2.0
tu0: auto negotiation capable device
tu0 at pci0 slot 12
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-05-A0-F1
tu0: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex
tu1: DECchip 21143: Revision: 3.0
tu1: auto negotiation capable device
tu1 at pci0 slot 13
tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-C4-14-2E
tu1: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex
tu2: DECchip 21040: Revision: 2.6
tu2 at pci0 slot 14
tu2: DEC TULIP (10Mbps) Ethernet Interface, hardware address: 00-00-F8-25-63-BC
tu2: console mode: selecting 10BaseT (UTP) port: half duplex
kernel console: ace0
Booted from Network Interface (BOOTP 0 13 0 0 0 3 0 08-00-2B-C4-14-2E 1)
bootp: request failed, errno=60
netblk.cliipadr 0
whoami: no host name
panic (cpu 0): vfs_mountroot: cannot mount root
syncing disks... done
DUMP: No primary swap, no explicit dumpdev.
Nowhere to put header, giving up.
halted CPU 0
halt code = 5
HALT instruction executed
PC = ffffffff00214210
--
/---------------------------------------------------------\
| Uwe Kirbach An der Autobahn |
| Bertelsmann mediaSystems NMI-DC 33311 Guetersloh |
| mail: uwe.kirbach_at_bertelsmann.de |
| phone: +49-5241-80-3514 fax: +49-5241-806-3514 |
\---------------------------------------------------------/
Received on Thu Jun 29 2000 - 11:27:35 NZST